In our new 5th Wheel RV, we received some ceiling mounted 12VDC florescent fixtures. They were equipped with 2 each 18”, 15W tubes and electronic ballasts. The fixtures are a “Low Voltage RV Luminaire” from “Direct Sourcing Alliance” identified as “Type RVL 18RNB-W”, “2 x 15W”, “Input Rating: 12V DC, 30W”. Their performance has been dismal with operation limited to, initially 30-45 minutes before shutting down due to overheating of the ballast. The “on” time got progressively shorter over the next few weeks. The overheating was certainly not due to ambient temperatures which have been in the low 70s or cooler. On disassembly for conversion to LED operation it was discovered the ballasts have discolored due to high heat (see closest end of ballast in Picture 2).

During review of options for LED conversion I was looking for a natural light color temperature with equivalent lumen output to the two 15W florescent tubes. I settled on the SuperBrightLEDs part number RLBN-NW30*3SMD which is a 19.5 inch rigid strip with 30 each 3SMD modules. The advertised light output was 603 lumin at a color temperature of 5600K. The two 18”, 15W tubes were stated to produce 825 lumins each so I was a little concerned about light loss especially since I was going to have to cut 6 LED modules off each of the two strips to fit inside the existing fixture. I bought a 3rd strip but in the end did not use it as the light was ample.

I first started by removing the “guts” of the florescent leaving some length of the switched power wires for future use. See pictures 1, 2, and 3.

After cleaning the interior of the fixture with alcohol for acrylic tape adhesion I fitted the rigid LED strips and cut 6 LED modules from the length, then mounted the strips using 3M double sided acrylic tape. Finally, completed power connections to existing fixture switch circuit. See pictures 4 through 10.

;

The power that runs to our home is something we have come to rely on. There isn’t a part of our day that does not somehow use electricity. It is how we cook, tell the time, play and stay clean. When the power goes out, our lives are turned upside down. Fortunately, the power grid has been fairly stable. Unfortunately, it isn’t stable enough and the smallest thing can take it out. It is a good idea to be ready to deal with a power outage should one catch you off guard. An electrician in Burbank has some tips for putting together a power outage kit. If you have any questions about power outages or what to do, give The Electric Connection a call.

It is a good idea to put your supplies in a drawer or in a small tote stored in a cupboard in a hall closet. It needs to be easily accessed in the dark. Adding a glow in the dark sticker or two to the tote can help make it stand out.

*Talk with a Burbank electrician about having security lights installed in your home and outside. These lights will automatically turn on when the power is cut. Some of these plug into an outlet and will come on when the power goes out, providing you with instant light.

*Toss in a few emergency candles and matches along with candleholders.

*Some LED headlamps and/or flashlights is also a good idea.

*Have the number to the power company in the kit or somewhere you can easily find it.

*Keep a few cans of food on hand along with a manual can opener just in case the power outage extends into the meal periods.

You can avoid the problems created when the power goes out by having a standby generator installed by an electrician. Burbank homeowners will take comfort in having a backup source of power. Give The Electric Connection a call today and learn more about preparing for power outages.