Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Welcome to Kolb Electric’s blog! At Kolb Electric, we want to be your number one source for residential and commercial electrical services in the Maryland, Virginia, and Washington, DC area, whether we’re on the job or not. To that end, we’ve created this blog to answer any questions you might have about your electrical system and electrical service in general!

Over the next few weeks, we’ll be filling this blog with the latest tips, tricks, and trends to keep your home or building’s electrical system running smoothly, so bookmark this page and be sure to check back often!

At Kolb Electric, we’ve built our business around providing the best possible customer service to each and every commercial or residential electrical customer in the Maryland, Virginia, and Washington, DC area. If you need electrical service and want to go with the most professional company in the area, call Kolb Electric today!

We often find there is a lot of confusion between Lumens and Foot Candles and Lux. And even more confusing is how some represent conversion from traditional light sources like Metal Halide and High Pressure Sodium in terms of watts, and not lumens. So why all the confusion. Well, it may be because those who represent this conversion are trying to avoid letting you know about the efficiency of the LED lights, so they claim you can replace X watts of Metal Halide with X watts of LED. What they should really say is that you can replace a 400W Metal Halide with X lumens, and their lights only need Y watts to produce these lumens. We’ll dive into this a little later, but lets first talk about lumens vs foot candles vs lux.

What is a lumen? A lumen is a measurement of light related to (1) fixture or bulb. So when we talk about lumens, we say that a fixture or bulb creates (X) lumens. These lumens are determined by sophisticated measurement equipment.

What is a foot candle? A foot candle is a unit of measurement at a specific location in a room or outdoor location that is created by 1 to many lights. It is a cumulative reading of 1 to many light sources at a specific location. It is both real and calculated. Real in the sense that you can take a light meter and walk to any location in a room or outdoor location and take a reading that represents the amount of light recorded from all contributing lights or fixtures. Calculated in the sense that you can use software to predict the foot candles of a space based on the placement of lights within the simulation.

What is lux? Lux is identical to foot candles. It is a measurement of real or calculated light, but it is done on a different scale. As a rough estimate, 1 foot candle = 10 lux.

So, simply stated, lights produces lumens, and the cumulative lumens of all lights are then determine the foot candle or lux measurement of light at a specific point in an indoor or outdoor space.

All of our employees, from the customer service representatives who answer your calls, to the licensed electricians who restore safety and functionality to your home, to the warehouse staff who make sure we have the necessary tools, products, and equipment, to the managers and owners who oversee everything, work diligently year-round to assure that your needs are always a priority. We strive to be leaders in the electrical industry as well as in our local communities.