Kicking back in your very own hot tub after a long day at work is one of life’s little luxuries. It gives you something to look forward to. The soothing, hot water can wash away all of life’s little aches and pains while giving you a little slice of heaven right there in your own backyard. Weekends and get-togethers are made a little more enjoyable when you and a few of your friends can enjoy the hot tub together. If you have been thinking about splurging on yourself, a hot tub is one way to do so while actually adding value to your home. Of course, value is only added if the hot tub is installed correctly by a certified electrician in Los Angeles like those at The Electric Connection.

A hot tub requires a special outlet to be installed in the area where you will be placing the hot tub. Because you are dealing with water and electricity, it is always best to have the job completed by a Los Angeles electrician. There are far too many things that can go wrong and jeopardize your life as well as the safety of your hot tub and home when you attempt to do the job yourself without any real knowledge of electrical wiring.

If you are putting the hot tub in the yard or in detached patio area, the wiring will need to be buried where it runs to the house. This is something that will typically require you to have permits with a certified electrician completing the job. Your hot tub may also require you to get an electric panel upgrade. This is something you will want to discuss with your electrician. Los Angeles homeowners can rely on The Electric Connection to take care of the installation and answer any questions they may have about the process.

If you live in an area where power outages are, unfortunately, quite common, you know just what an annoyance they can be. Sometimes, homeowners have portable generators they can plug a few appliances into so that they can stay at home. But for some longer outages, families have to leave their homes.

An automatic standby generator can power your whole house automatically! We recommend this to anyone who’s ever had to put up with a days-long outage, or for those who worry they one day will.

Portable generators can be useful during a power outage, but not for long. Fuel capacity is limited and depends on how much you can store at your home. The number of lights and appliances a generator can power is very limited, especially for larger homes and households.

Automatic standby generators use a transfer switch to detect a loss of current flow and automatically restore power to your entire home. You won’t have to do a thing!

Yes, a generator can cost a lot of money upfront. But the good news is that you’ll have it in your home for many, many years. It pays for itself if you save on losing refrigerated items, spending money on fuel and battery-powered appliances, or even hotel costs from moving out of the home for a day or even weeks.

Your home is a lot safer when you have a whole-house generator to protect it from flooding, burst pipes, and other issues. Keep the heat on to protect your pipes, continue operating your sump pump, and know that your home is safe.

In many cases, being without power for too long can actually lead to major safety hazards. Going without lights can be dangerous, particularly if you have kids or elderly family members. And many people with health issues can’t get by for long without heating or air conditioning—or without lifesaving medical equipment.

If your old electrical panel is no longer functioning properly, it can be endangering your home and everything inside it. Read on for the various warning signs you should be looking out for.

Even an old electrical panel is an improvement over fuse boxes (these can no longer keep up with the energy demands of today’s households), but if it’s getting to be a bit too old, you may need to look into replacing it. The panel is responsible for taking power from the main line outside and directing it through your electrical system.

The electrical panel also disconnects circuits when there is too much current flowing through — this is what protects you from hazards like electrical fires and damaged appliances. If you’re not sure you need to replace your existing setup, we’ve put together some of the warning signs that will indicate whether or not it’s time to move on to a new panel:

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.