Lights are one of the greatest things about the holidays. You’ll find them in trees, colorfully decorating home exteriors; you’ll even find them on vehicles. And honestly, we love it. Lighting is one of the keys to the spirit of the season and an integral part to this time of the year. But, as we’re all well aware, they aren’t exactly the easiest thing in the world on your energy bills.

Looking for ways to keep your holiday lighting costs at a minimum this year? With more than 25 years of experience and knowledge, we can give you a hand! Sit back, relax, and let the certified electricians at Hoffman Electrical show you some quick and simple ways to lower holiday lighting costs!

There's an easy way to save money on your electricity bills that doesn't require any new appliances, smart technology or other expensive upgrades. This revolutionary idea is beautiful in its simplicity: Just unplug your devices when you aren't using them. It turns out that “always on” or standby technology is filling up the electricity meters and draining the pocketbooks of consumers across the nation. Read on to find out more and inspire yourself to pull the plug.

A Shocking Waste of Energy

Ready for a shocker? Idle devices are costing Americans a cumulative $19 billion per year, or $165 per household, according to a report by the Natural Resources Defense Council. The paper, titled “Home Idle Load: Devices Wasting Huge Amounts of Electricity When Not in Active Use,” translates the numbers into something compelling: Each household wastes enough electricity to brew 234 cups of coffee per day. That's a lot of caffeine!

To be more explicit, the excess electricity use is equivalent to the output of 50 large power plants. In addition to spending money unnecessarily, we're creating an enormous amount of pollution just to power electronics that aren't in use. These bits of electricity are called energy vampires or phantom loads, notorious for their scary effect on your wallet and the environment alike.

Devices Gone Digital

Most devices drain small amounts of electricity no matter what, and the proliferation of standby technology that makes it easy to turn things on quickly or via remote control amplifies the waste considerably.

“One reason for such high idle energy levels is that many previously purely mechanical devices have gone digital,” Pierre Delforge, the report’s author and NRDC’s director of high-tech sector energy efficiency, told EnergyEfficientMarkets.com. “Appliances like washers, dryers, and fridges now have displays, electronic controls, and increasingly even Internet connectivity, for example.”

Obviously, you can't unplug your refrigerator or freezer, and some equipment like electric stoves and central air units might be inconvenient or impossible to disconnect on a regular basis. But there's still plenty of savings to be found in your televisions, computers, game consoles, phone chargers and other electronic devices found in the modern household.

What Can I Do?

It’s not realistic to expect every homeowner in America to go around plugging in and unplugging dozens of devices every day. But there are some tips that can help you out:

With just a little bit of extra diligence, you can do your part to reduce our energy consumption in the United States, and save money while you're at it.

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.

The average household in Virginia pays $125 per month for electricity, according to the U.S. Energy Information Association. In Maryland, that number is $136 per month and in DC, it’s around $90. For commercial properties, the figure is even higher. But at Kolb Electric, we know that there are simple steps you can take to lower your electric bill—and we’re going to share a few key tips.

1. Check for gaps in windows and doors. Perhaps the easiest thing you can do to reduce your energy usage, and thus your electric bill, is to check your home at the beginning of each season for gaps around the windows and doors. It’s important to do this every six months or so, since your home can settle and shift slightly over time. It only takes a small gap for energy to escape.

2. Turn down your water heater. The standard setting on most electric water heaters is 140 degrees. Turning the heat down to 120 degrees can save you $60 or more each year in water heating costs. Save more by replacing your water tank with a tankless system.

3. Repair leaky ducts. If your ducts have holes in them or if they have come partially unattached, then you’re paying to cool and heat air that is never getting to your living spaces.

4. Have your HVAC and electrical systems serviced annually. Keeping all electrical systems, as well as HVAC products, well-maintained can not only extend their lifespans and help ensure your safety, but can save you money on your electric (and gas) bill too. Your system has to work harder and use more energy to push through an accumulation of dirt and debris. Regular electrical maintenance can also prevent the need for costly repairs.

5. Check your electric meter against your monthly statement. It’s a good idea to get in the habit of checking your electric usage on the meter and comparing it to your statement. This allows you to easily determine whether your monthly energy bill is accurate and provides you with the information you need to monitor your usage so you can use electricity smarter in the future. Click here to learn how to read an electric meter.

At Kolb Electric, we don’t want you to pay any more than necessary for your electric usage. For more tips on how to reduce your electric bill and/or to schedule you annual service appointment today, call us at 877 287-1179. Our licensed electricians have been helping Mid-Atlantic homeowners with their electrical needs since 1925.

There are two things that regulate the power circuits in your home: fuses and breakers. Breakers are designed to turn off when they are using too much power, as that will prevent the wiring in your home from burning out. Fuses serve much the same role, though they don’t trip — they simply burn out when they are overloaded. Knowing how to replace fuses and breakers is important, as it will help you to keep the power in your home on at all times.

See, quick and easy to replace both fuse and breakers! If you need an electrician in Austin to come out and help you repair electricity problems in your home, call Bryant Electric Service today at 512-402-8587. One of our friendly service members will answer any questions you may have!