A bit of mathematics at the end of the week. The

The first table shows three different installations. The old one is equipped with T8 fluorescent lamps that are at the end of their lifetime and dirty. That is why the luminous flux is so low for the 60W tube. In this situation, the need for a replacement is present. The choice is between a fluorescent tube, a LED tube or a completely new installation with controls. Controls reduce the average power consumption to 1/3 and less of the original load. We can estimate the new fixtures will consume 12W only when connected to controls that detect presence in the hall and reduce the lighting level in areas that are not in use. Each light point will be replaced. It is (often) possible to reduce the number of fixtures with a new installation. The example is concentrating on a one-by-one replacement to make it easier to understand.

The table above shows the sum of all costs for running and maintaining the installation each year and in total. The Retrofit Solution reaches an ROI after 2 years already. The New Installation with controls is going to turn back the high investment after 10 years. Both LED solutions do better than the conventional one, save energy and CO2 emissions. Let’s go green with LED light sources!

It’s important to remember while enjoying the summer weather, while outside or around the home, that there could be a variety of electrical hazards lingering. While not obvious at first, these issues could cause very serious (and potentially fatal) injury through electric shock. Our team at Expert Electric has created a list of common outdoor and indoor hazards to be aware of this summer.

Stay away from power lines with your body, toys, sticks, or anything an electrical current could travel down. Power lines transport extremely high voltage electrical energy. Venturing too close to a power line can create an opportunity for the electricity to flow to your body or object resulting in serious injury. If you see a fallen power line, call 911 immediately.

Ensure all your outdoor electrical receptacles around the exterior of your home or shed are covered, clean and dry. If water or dirt enters the outlet it can result in electrical surges and shocks when the outlet is next used. Receptacle covers can be purchased at most home renovation retail stores.

Keep all power cords, string lights and electrical devices away from ponds, swimming pools, hot tubs or sprinklers. Summer can lend itself to a lot of splashing and water flying through the air. If water comes into contact with an electrical device there is a high risk of electrical shock. Do your best to keep electrical devices at a distance from the pool and water fights.

Ensure that you have GFCI’s (ground fault circuit interrupter) outlets installed in certain areas of your home – namely rooms with running water mainly (bathroom, kitchen, garage, basement, pool rooms, etc.). These outlets can prevent electrical shock from happening with specially designed safety mechanisms.

In an emergency, know where your circuit breakers are and how to turn them off safely. When a panicked situation occurs, it can be easy to become confused and flustered. If you are knowledgeable interacting with your circuit breaker you will be more confident in the event of an emergency.

Before plugging in a fan, make sure that it is clean and there are no wires frayed or damaged. Occulting fans are often stored for most of the year. During storage power cords can become damaged and electrical wires exposed. Exposed wires leave you vulnerable to electrical shock when the fan is plugged in again.

Be sure to have any portable air conditioning units securely positioned and electrical cords tucked away. These are tripping hazards that can lead to either electrical shock or a heavy unit falling down. It’s also important to follow the manufacturers instructions on maintaining and servicing the unit to prevent damage to the home’s electrical system and personal injury.

It is important to be aware of potential electrical hazards in order to identify and avoid them. Our team of trained and licensed electricians are happy to help you ensure your home and family are safe from electrical hazards. If you would like more information on electrical safety tips to be aware of during the summer or general, contact Expert Electric today at 604-681- 8338.

Is it driving you crazy to charge all of your devices? Smart phones, tablets, digital music players, digital cameras and more have made many facets of life more convenient, but they come with their own complications and annoyances as well. For one thing, all those devices need their batteries charged, sometimes every day, and it can be quite a pain to keep track of all the cords and adapters. Fortunately, with a little DIY talent or the help of an electrician, you can install combo outlets in your walls with built-in USB ports, making it easier to charge your gadgets wherever you’re at home.

Out with the Old, in with the New

To install a USB outlet, you need to buy an outlet kit from your local hardware store or from an online retailer. You can find various options with two or four USB ports combined with one or two traditional power outlets. If you are comfortable doing simple electrical work, you can probably install the outlet yourself; otherwise, an electrician can do the work and have you up and running quickly.

If you are a DIYer, the first step is to turn off the power to the circuit you are working with. After you turn the switch off at the circuit breaker, make sure you test the outlet with a light or other appliance before you proceed to make sure it doesn't have any current. Next, you'll need to remove the old outlet with a screwdriver and disconnect the wiring. Then, simply connect your new outlet, carefully following the manufacturer instructions. It's extremely important that you reconnect all the wires properly, including the ground wire.

Convenience and Simplicity for Your Devices

Once the new outlet is wired up and screwed into the wall, flip the circuit back on and you should be good to go. Give the new USB outlet a test drive with your phone or tablet, and then sit back and enjoy the convenience and simplicity. Unfortunately, you still need to have an appropriate cord around to take advantage of the USB outlet, but at least you can do away with the cumbersome adapter. That frees up space, since adapters are often so bulky that they cover multiple outlets even though they only use one. Plus, the built-in USB ports limit the electrical current to whatever amount is required to charge the device.

You don't need combo outlets everywhere you have a plug, but if you put them in highly-traveled areas like the kitchen, office and bedroom, you will have easy access to their charging power whenever you need it. Those readers who enjoy perusing their phones in the bathroom can even put a combo outlet by the sink – just make sure you don't get water on your device!

Recharge Your Life with the Help of an Electrician

If you need any help installing or upgrading outlets in your home, call an expert electrician today.

Imagine never having to go to the gas station again. While that may not happen just yet, you can certainly minimize the number of trips to the gas station to put fuel in your car if you have an electric car. However, some people who do have electric cars are finding they are looking for a station of another kind. An electric vehicle charging station. These stations are growing in popularity and are popping up all over, but it can still be a bit problematic for those that are on the go a lot. You need your own EV charging station install. Los Angeles homeowners who have an electric car and would prefer to charge it when they are at home and on their own time can give The Electric Connection a call.

The installation of an EV charging station can make your life a little easier. When you are at home, your car is charging. A charging station isn’t the same as the standard plug in option that comes with all electric cars. The stations charge the car at a much faster rate, which makes them so desirable in a world where we are constantly on the go. You don’t have to worry about leaving your car plugged in for a full 24 hours to get that full charge when you have your own charging station set up at your house.

The fast charging systems will need some electrical wiring, which is always best left to the professionals. You don’t want to risk electrocution or accidentally frying your new charging system. You also run the risk of putting your home in jeopardy of a wire shorting out, which can cause an electrical fire. It is best to have a certified electrician install the necessary wiring and the dedicated circuit needed to run the charger. Give The Electric Connection a call today and schedule your electric car charging station installation.