New home construction is a dream many families have. There is a great deal of satisfaction to picking and choosing the layout of your home and adding elements that are specific to your family’s needs as well as your own decorative tastes. There are plenty of contractors who will give you the freedom to have a say in the planning stages, including what electrician company is hired to complete the work. Home construction has many elements. You will need plumbers, electricians, framers, painters and landscapers. Having a say in the hiring decision ensure you are getting the chance to choose the best company possible. At The Electric Connection, we understand your desire to check references and see our work. Some of the things that an electrician will be required to do for your new home construction are as follows;

*Install the electric panel. This is the hub of the electricity to your house. The electrician will ensure it is adequate for your home.

*Install the proper wiring for large appliances like the refrigerator, washer and dryer.

*Complete the wiring needed for outlets and switches. Wiring will need to be properly installed to pass inspection. The electrician will ensure the wiring is tight and secure to each of your outlets and switches.

*If you are having a standby generator installed, the electrician will take care of that as well.

*If landscaping is a part of your new home construction, your electrician can take care of installing and hooking up your outdoor lighting as well.

These elements may not look like much on paper, but the electrical wiring in a home is one of the most crucial elements. It is absolutely essential the work is completed by a competent and experienced electrical contractor to ensure the home is safe. This will also reduce the risk for future service calls. Give The Electric Connection a call today and see what we can do to help you fulfill your dream of new home construction.

For many people the basement is a place of escape and for others it is simply a place for storage. With all the room underneath you, you don’t want it to go to waste. Renovating your basement can greatly increase the value of your home if it is unfinished or in need of an update. One important point to remember is the electrical wiring hiding behind the walls.

If you bought your home and it was already finished, that work could have been done many years ago and you might be thinking it is time to update fixtures, paint, and maybe evening moving a wall. When you begin pulling things apart, be careful for loose or old wires. If the electrical work was not done right, there could be loose electrical wires that were not tied in properly.  The wiring can also be old and out of date. If you are moving walls or replacing fixtures and you are worried about the age of the wiring, have a licenced electrician come to inspect your wiring. If you are going to go through the effort of redoing your basement you want to make sure it is done right.

For those who have an unfinished basement you have a clean slate to work from. Once you start putting up the framing for rooms, you can start on the electrical rough in. This is the foundation for the electrical wires, which includes drilling holes in the framing and running the wires to where they need to go. If this is not done correctly it could leave you with a significant headache once your drywall is up and you have to punch a hole in the brand new wall.

When you are planning out your new layout, make not of where each outlet, light switch, and light fixture will be placed. This will help you plan out the electrical rough-in. If you have reached this point in your basement renovation and don’t know where to go from there – contact Expert Electric. Our electricians can help you with the planning and running the wires through your basement.

Most electrical panels are located in the basement. Prior to your renovation, you probably could easily access the panel. When you are putting up framing and drywall, be sure to leave enough room around the panel for it to easily open. You also want to make sure not to cover it with furniture that could prevent you from accessing it quickly. In the event that you need to turn on a tripped breaker or even turn off a circuit in an emergency, you don’t want to be struggling with furniture to get the panel open.

Before you renovate your basement, have a plan and be prepared.