The costs of lighting changes from year to year. As technology gets better and demand increases, prices drop, effcicieny increases, and everyone is in a win-win situation. With this ever changing landscape comes misinformation, which is why we have put together this post.

This post is going to lay out the true tennis court lighting costs for 2017. On top of that, we are going to go over some tips and things to be on the look out for in regards to choosing the best light fixture for your tennis court that will save you money and produce the best illumination possible.

This post will be broken into two parts; the average costs that are associated with the actual light fixtures themselves and the costs associated with them. Then, the average costs of powering your lights and how to achieve a higher return on investment by being a smart buyer.

Let’s start off with defining what exactly tennis court lighting is, and why it matters.

For starters, tennis court lighting is the application term for high mast lighting. High masts are the other technical terms, there are many that go far beyond the scope of this post. But, we think you should know the definition of lumens as we use it quite often. Technically, a lumen is the SI unit of luminous flux. Although that doesn’t say much, just know that lumens, in simple terms, is the amount of light being emitted by a given fixture. The more lumens, the more light you will have being output.

Now that we have a basic understanding of what tennis court lights actually are, we can get into the real costs of tennis court lights. Hopefully, these costs allow you to be aware of all the options and give you a better understanding on how to go about selecting the proper lighting technology for your court.

The costs associated with your tennis court / retrofit kits are typically much cheaper)

4. Quantity of fixtures needed

5. Your tennis court lux requirements or desires

As with any industry, what brand you buy from and what technology you buy is going to be the biggest cost variable. The most important thing to keep in mind is not only the initial costs of a fixture, but also the costs of running such fixtures over the span of it’s lifetime.

If, for example, you have one light that consumes 1000 watts of light and another that consumes 400 watts but the first one was only $500 and the second one was $1,000, which would you buy all else equal? Well, assuming they both output the same amount of light it actually makese sense to go with the second light, even though it costs twice as much.

Why you ask?

Because the cost to operate the 1000 watt light is more than double that of the 400 watt light, which over the lights lifespan can actually end up costing you much more to run the 1000w light.

These numbers aren’t entirely fictionary either, in fact; they are very close to real life examples we have seen when other tennis courts convert to LED technology from metal halide or HPS. What we haven’t described in the above example though is other cost saving benefits that LED has besides just being more efficient; but we will get to that later.

As for actual costs, they can vary far too greatly for us to list here. It all depends on what lighting technology you choose (think LED, metal halide, etc), which company you buy from, the quantity you need, if you are retrofitting or fully replacing your fixture, and what your lumen output requirements are.

A quick note on retrofitting or replacing in simple terms; retrofitting is typically cheaper for a couple of reasons. Retrofitting in short, is the process of replacing only the luminaire source from your fixture, instead of the entire fixture itself. LED vs metal halide cost to run in our example, the cost analysis can be run between any technologies in the same way. As you will see though after comparing metal halide’s  cost to run vs LED, that LED is far more efficient and costs significantly less to run.

Let’s get into the example:

Let us assume you have 10 lights. Currently, your high masts are metal halide and use 1,000 watts per fixture. Now, let’s assume you are looking for a more efficient technology and you come across LED high mast lights. You find a comparable light which will output the same amount of light (or lumens), but only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 10,000 watts (assuming you have 10 lights) and the LEDs would be using only 4,000 watts if installed. That is 2.5 times less energy being consumed, which can visibility lead to huge savings.

This reduction from 1,000 watts to 400 watts per fixture in the metal halide to LED conversion in exactly why sports field, including tennis courts, are converting to LED.

Extra Tips for Reducing Costs

Conclusion

Hopefully the explainations of where the cost of tennis court lights are in 2017 have been thorough. While it’s impossible to give exact prices for every scenario, we hope this has been a starting point to your tennis courts lighting system.

Electricians have been using copper for electrical wiring since the 1820s. It may surprise you to know that since then, we’ve never found, or needed, a replacement! Copper has numerous properties that make it ideal for electrical wiring. In fact, we can likely expect copper to continue to be used far into the future.

Ductile and Malleable—ductility and malleability are two very useful properties of metals. Something that is ductile can be hammered into a thin wire easily, and something malleable can be manipulated and bent into shapes easily. These properties make copper wires inexpensive to produce and easy to install.

Excellent conductivity—copper’s electrical conductivity is far superior to other types of non-precious metals, which allows it to carry greater amounts of current with a smaller diameter wire.

Non-corrosive—one of the biggest benefits of copper wiring is that it is non-corrosive, able to survive in harsh environments with almost no risk of wear and tear. It’s not uncommon to see copper wires last for 40 years or more!

All of these properties make copper the gold (or should we say copper!) standard in the electrical industry. For both commercial and domestic purposes, copper is considered the go-to material for wiring. In fact, most modern buildings being constructed today are designed to accept copper wiring. The prevalence of copper wiring makes rewiring a lot easier as well.

During the 1960s and 70s, aluminum wiring was used in many homes as a cheaper alternative to copper. Unfortunately, problems were discovered with aluminum wiring. The biggest danger associated with aluminum wiring is that it can react to materials used in outlets, light fixtures, and splices, where it can oxidize, deteriorate, overheat, and catch fire. The CPSC estimates that about 2 million homes were built with aluminum wiring between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

The other problem with aluminum wiring is its high electrical resistance, which makes it more difficult for current to flow. As a result, you experience greater losses with aluminum wiring than you would with copper.

More than any other material, copper has stood the test of time for use in residential and commercial applications. If you’ve been thinking about rewiring your home and want to use the best materials possible, call Kolb Electric today!

Proper lighting and positioning is a major factor in enhancing your brand image, building a customer base and increasing the sales of your retail store. A well-designed store is bound to generate higher sales than the one with an ordinary interior.

Shoppers these days are more knowledgeable and opinionated than ever before. There is a need for retailers to equip themselves with the right skills and tools to attract their attention and make shopping a memorable experience for them.

Upgrading the lights and positioning is one of the easiest ways to restore and enhance your store’s appeal, thereby making an impact on the sales.

The Retail Welcome

Your store’s exteriors and lighting systems are vital. This is the place making way to the store entrance. If your store is inside a shopping mall, then you might spend more on ads, signage and billboards, or else lighting should be the focus.

The proper outdoor lighting. Mostly, we tend to focus on name boards which are aesthetically designed with spotlights. But outside area should never be ignored.

The entrance of the store makes an emotional connection with a shopper. That’s where you showcase your products. Proper lighting and correct positioning can make all the difference here. Even an ordinary product can be made to look good when the lighting is spot on. This persuades the people who don’t intend to shop in the first place, enter your store.

Good lighting designers would strongly suggest using a variety of lighting intensities, colors, fixtures and placements to craft an impressive entrance.

Product Lighting

Right lighting at various areas within a retail store increases shoppers’ engagement with the products. Different lighting caters to different products which could be dissimilar in shape, size, texture, pattern and color.

The lighting needs to be in tune with the products that your brand sells, so at the time of testing, customers can closely experience the appearance and usefulness of the products they want to purchase. For example in a clothing store, the color of lighting often makes a garment look different in terms of shade and tone.

Lighting for walls and decorative stuff in your store should never take precedence over product lighting. You are there to sell your products and not murals or ceilings. A retail store for interior items is an exception.

Light boxes can enhance the appearance of your top products and special items. Since shoppers are naturally drawn to striking and unique displays, these items gain instant visibility. This makes it a great opportunity to showcase the best sellers, higher margin items, or even items you simply wish to sell faster.

Lighting the Fitting Rooms

Proper illumination within the fitting or trial rooms ensures an easy selection and product check for shoppers.

Make sure that the colors, quality, and fit are clearly visible. Smart lighting with careful use of mirrors and cabinets makes a product look better when tried on.

Customer Experience is Paramount – Some Tips

Right lighting and positioning is only one of the parameters among others that define sales strategies but mostly, it is overlooked by retailers.

Store owners and retailers must find out a way to measure if the store lighting is making an impact to their footfalls and sales. The results would certainly convince them revive the entire store from lighting perspective.