Most people have air conditioning in their homes and though the temperatures don’t really drop too much even during winter here, there are definitely days on which there is a nip in the air, and if you have tiled flooring, it’s bound to get uncomfortably cold. While heating systems do help solve this problem, many homeowners are now transitioning to radiant heat. This provides very pleasant warmth to your body and feet as it warms the surface of the floor.

These under floor heating systems are suitable for hard floor surfaces such as living rooms, kitchens, entertaining areas, bathrooms etc. Since the air circulation is very gentle, there is a marked reduction in the amount of dust particles that get circulated, it’s a great relief for people that suffer from asthma and allergies.

When you are planning on getting this system installed, it’s important that you hire the services of a well-established and credible company; they will understand what your specific requirements are and then provide you the kind of solutions you need.

This type of heating uses heating cables that are well-embedded in the flooring concrete slab and it provides the right amount of heating. It essentially stores the heat during the night and then slowly releases it during the day and provides continuous warmth.

As you can see, there are a number of other advantages to getting underfloor heating systems installed. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Antique architecture might be beautiful, but the electrical wiring in old houses doesn’t carry the same kind of charm. If you have an older home with an electrical system that hasn’t seen updates in a long time, you could be living in dangerous conditions without realizing it.

There are warning signs that may indicate your wiring is too old, but if you’re ever in doubt, there’s a fool-proof way to get an assessment of your system: Call in a professional! An expert will perform an in-depth inspection of your home’s wiring so you can be aware of the situation and the solutions for it.

With outdated wiring, you may notice strange signs from time to time. Some of them might occur with more regularity than others, but any instances at all can be cause for concern. In general, you’re at risk for having old wiring if your house is 40 years old or more. A few warning signs include:

Although old wiring can raise insurance premiums and keep you from using as many appliances as you’d like, the most important issue is safety. Over the course of time, the insulation surrounding the wires will break down until it eventually leaves the wiring exposed. The insulation protecting older wires doesn’t last as long as it does in newer installations. This means outdated electrical systems are much more likely to feature exposed wiring than those installed more recently.

With inner wiring exposed, the likelihood of short circuits and power failures goes up. Worse, deteriorated insulation translates to a much higher risk of suffering from electrical shocks or having fires break out in your home.

If you have any doubts about the wiring in your house, don’t take unnecessary risks. Ignoring the warning signs of an outdated electrical system can put you and your loved ones in danger. Beyond that, whatever money you might hope to save by not calling a professional would only go into repairs later on.

If, like many Des Moines homeowners, you’re considering sprucing up or renovating your kitchen, you should absolutely consider a carefully mapped out lighting strategy. This sounds strange to many people, as light is considered to be a foregone conclusion when designing a space; this couldn’t be further from the truth, as properly utilized light is necessary to get the most out of any kitchen. Today, our electricians will share some basic strategies for improving your kitchen’s lighting.

To get a grasp on what it takes to best lay out your kitchen’s lighting, it is important to understand how a kitchen relates to the three main types of lighting available through natural and house wiring: Ambient lighting, task lighting, and accent lighting.

The easiest to understand and utilize is ambient lighting, which is essentially just lighting designed to help us see and navigate inside of a room. Ambient lighting often comes from other rooms, widely dispersed lamps, grid-style can lighting, or natural light streaming in from windows or semi-translucent skylights. This lighting should used to create a generally visible room without any other sources of light on; think of ambient lighting as your basecoat layer of lighting, ideal for illuminating the room, but not great for a highly specific task.

Just as it implies, task lighting is ideal for illuminating a given task; for a kitchen, task lighting is perhaps the most important to properly plan out and execute. If your kitchen features nothing but recessed can lighting, then you will sorely miss the absent task lighting whenever prepping, cooking, or cleaning your kitchen. Lighting a single direction alone, such as the ceiling, will do a very poor job at illuminating spaces under cabinets, in sinks, or on the floor; additionally, one-dimensional lighting creates unsightly shadows and can cheapen the effect of your space. Having specifically utilized pendant lighting over an island or under-cabinet lighting for your countertops can make all the difference in the way your kitchen is used and displayed.

While accent lighting may seem to be the least necessary of all lighting types, as it provides little functional lighting in terms of ambient or task lighting, it can make the largest difference in the display of your kitchen. If you’re hoping to improve the look of your kitchen with an electrician alone or from an entire renovation, then you should put plenty of thought into your accent lighting. For instance: Task lighting under your cabinets can provide vital under-counter illumination, highlight your beautiful green glass tile backsplash, or both, depending on the electrician doing the installation.

Whether you’re concerned about your cavelike kitchen or planning an upcoming renovation, be sure to contact Des Moines’ trusted local electricians at Electrical Gurus today; we have the skills and experience necessary to transform your house’s wiring into the best possible lighting for your home’s kitchen.

Get in touch with our Des Moines electricians today!

A lot of time we are asked what is the equivalent LED product to convert from Metal Halide, High Pressure Sodium or Mercury Vapor. And a lot of time, we have a product in mind that works based on past experience. But how did we come up with that product, and how did we make the original decision on what was the proper replacement?

There’s a lot of science that goes into light, color, quality, and each light had it’s own characteristics. For example, it takes less LED to replace High Pressure Sodium than it takes to replace Metal Halide. And we are talking a lot more than just lumens. We are talking about color temperature, quality of light and something called photopic / scotopic lumens.

In the world of lighting, we measure foot candles with a light meter, this is called a photopic measurement. The light meter picks up everything, including spectrum’s that are invisible to us. Now, we humans see things to, and this is called scotopic lumens. Our rods and cones read and interpret light. And it does so differently than what a light meter does. So it is not uncommon when we demo a LED Light against a HPS light or Metal Halide, we first ask “Which is brighter” before we show the light meter reading. It leaves a few people scratching their heads. Well, that’s the science of of it all, and fortunately there is some handy tables called SP ratios that allow us to take the lumens of a particular light (photopic lumens) and multiply it by the S/P ratio to get the scotopic lumens equivalent.

For example, the S/P ratio for High Pressure Sodium is 0.40. The S/P ratio for LED at 5000K is 1.8. So if you take 40,000 lumens of HPS and multiply it 0.4, the effective scotopic lumens is 16,000. To get the same amount of lumens from LED, take the 16,000 and divide it by the S/P ratio and you get 8888 lumens. So the 8888 lumens of LED is the photopic measurement, the 16,000 LED lumens is the scotopic lumens measurement. So in an nutshell, you need 8,888 lumens of LED to replace 40,000 lumens of HPS from a scotopic point of view.

Here is a handy chart of common lights and ratios for you to use.

This guy’s name is Humphry. He’s about 24 years old. A chemist. And, by the looks of him, pretty content with his accomplishments and station in life. He’s the boy wonder credited with creating the first incandescent light. He seems to be thinking, “I’m just a genius. No biggie.” It’s around 1802. England.

The incandescent light bulb is our homie. It has been with us, creating warm, flattering light, rendering colors beautifully, and making human life at least 45% more magical for almost 200 years. Even though 90% of its energy is emitted as heat, making the standard tungsten light bulb almost inexcusably inefficient, we’ll always have love for the incandescent light bulb and its flattering light.

Many brilliant minds have contributed to the incandescent lamps we have today, but Humphry Davy stands out to me for his ingenious invention that led to “the most profound invention since man-made fire.”