Most homeowners have very little experience working with an electrician in Glendale CA. As a homeowner, however, it is highly probably that you will require electrical service of some sort while you are living in your home. Whether you end up needing bath fans replaced, a home rewire, an electrical upgrade or any other type of electrical work, becoming comfortable working with electrical technicians can make the entire process much simpler.

Be Courteous

This should go without saying. Whenever you are working with someone who is providing you a service, you should always be kind and courteous. This holds true from the time you speak to the receptionist at your Glendale electrician to the time the technician cleans up and goes home. In addition to just being common courtesy, being kind also has many other benefits. In the same way that the technician should provide the highest level of customer service, you should leave an impression as a grateful and understanding customer. Remember that you are building a lasting relationship, and that kindness is more likely to pay off than gruffness when you are in a pinch.

Clearly Explain What You Need

By clearly explaining the job that you need completed, you save both yourself and the electrician in Glendale CA some very valuable time. Before you call to schedule an electrical service call, you should (in most cases) have a very clear idea of the work that you need done. If you need a ceiling fan installed, let them know of any special considerations. If you would like to install a whole house surge protector, share as much information as possible. If you are unsure of exactly what it is that you need, that is ok too. This is common when there is some sort of problem that requires electrical troubleshooting. Try your best to explain what is happening so that the technicians can provide the most accurate answer that they can.

Be as Flexible as Possible

Electricians often have a busy schedule. This means that even those that are very good at coordinating appointments may be late or have to reschedule. While this may be inconvenient, it may happen to you. Rather than becoming upset because they were late, grade your Glendale electrician on how they handle any hiccups in the system. A good electrical contractor will be quick to communicate, letting you know as soon as possible of any changes in scheduling.

Expect Quality Work

While you should always be kind and courteous, you should also expect quality work. Each electrician in Glendale CA should always provide you with the level of service that they promise. If you are ever unclear on exactly what it is that they are providing, just ask. By communicating as clearly as possible, you can often avoid any misunderstandings. Something that you perceived as incomplete, or poorly managed may have just slipped through the cracks. As with every other aspect of working with your electrician, communication is key. Furthermore, many large issues can be avoided by always working with an electrician with a high level of experience and strong reputation. When you choose an experienced and licensed contractor like The Electric Connection, one of the most important things that you can do is build a relationship together based on trust. Any homeowner or small business will remember repeat business and be very grateful for it. By establishing a strong rapport with your Glendale electrician, you not only know exactly who to call when you need help, but they’ll also know you and they’ll be completely familiar with your electrical system.

Click here to visit our website.

It’s important to remember while enjoying the summer weather, while outside or around the home, that there could be a variety of electrical hazards lingering. While not obvious at first, these issues could cause very serious (and potentially fatal) injury through electric shock. Our team at Expert Electric has created a list of common outdoor and indoor hazards to be aware of this summer.

Stay away from power lines with your body, toys, sticks, or anything an electrical current could travel down. Power lines transport extremely high voltage electrical energy. Venturing too close to a power line can create an opportunity for the electricity to flow to your body or object resulting in serious injury. If you see a fallen power line, call 911 immediately.

Ensure all your outdoor electrical receptacles around the exterior of your home or shed are covered, clean and dry. If water or dirt enters the outlet it can result in electrical surges and shocks when the outlet is next used. Receptacle covers can be purchased at most home renovation retail stores.

Keep all power cords, string lights and electrical devices away from ponds, swimming pools, hot tubs or sprinklers. Summer can lend itself to a lot of splashing and water flying through the air. If water comes into contact with an electrical device there is a high risk of electrical shock. Do your best to keep electrical devices at a distance from the pool and water fights.

Ensure that you have GFCI’s (ground fault circuit interrupter) outlets installed in certain areas of your home – namely rooms with running water mainly (bathroom, kitchen, garage, basement, pool rooms, etc.). These outlets can prevent electrical shock from happening with specially designed safety mechanisms.

In an emergency, know where your circuit breakers are and how to turn them off safely. When a panicked situation occurs, it can be easy to become confused and flustered. If you are knowledgeable interacting with your circuit breaker you will be more confident in the event of an emergency.

Before plugging in a fan, make sure that it is clean and there are no wires frayed or damaged. Occulting fans are often stored for most of the year. During storage power cords can become damaged and electrical wires exposed. Exposed wires leave you vulnerable to electrical shock when the fan is plugged in again.

Be sure to have any portable air conditioning units securely positioned and electrical cords tucked away. These are tripping hazards that can lead to either electrical shock or a heavy unit falling down. It’s also important to follow the manufacturers instructions on maintaining and servicing the unit to prevent damage to the home’s electrical system and personal injury.

It is important to be aware of potential electrical hazards in order to identify and avoid them. Our team of trained and licensed electricians are happy to help you ensure your home and family are safe from electrical hazards. If you would like more information on electrical safety tips to be aware of during the summer or general, contact Expert Electric today at 604-681- 8338.

An electric conduit is electrical tubing used for protection and routing of electrical wiring. They can be made from a variety of materials, such as: plastic, metal, fiber and fired clay, all depending on the purpose it is being used for. It is generally installed by electricians at the electrical equipment’s installation site. The regulations governing the conduits’ use, form and installation details are specified by the US National Electrical Code (NEC).

Conduit is used as a general term to describe any system that contains electrical conductors. The conduit systems are installed for the following reasons:

To operate as pull outlets for the conductors that are being installed Make 90° bends in conduit runs

Types of Conduits

Conduit systems are classified based on the material used to make the tubing, mechanical stiffness and wall thickness. The material is selected for mechanical protection and corrosion resistance after taking into consideration the cost factor. There are special guidelines to be followed for wiring equipment in hazardous areas that need prior approval. Based on these factors, we examine a few prominent conduits:

Form 35/5/85 ex. Appleton LB400M

The Form 35 is used for malleable iron unilets as they have high tensile strength and ductility along with high corrosion and shock resistance. With the easy inbuilt rollers of type C (1-1/4” thru 4”) and type LB (1-1/4” thru 4”), these type of conduits help eliminate the damage when cable is pulled through the hubs. Form 5 has inbuilt rollers on all 11⁄4 to 4 C and LB bodies to facilitate wire pulling.

Form 7 ex. Crouse hind LB37

The Form 7 ex. Crouse hind LB37 is compatible with rigid and intermediate conduits for indoor as well as outdoor installation. It is made of cast iron or cast aluminium for a long life. It is extremely suitable for compact installations with rigidly threaded conduits of various shapes and sizes. The Form 7 has an exclusive snap tight and wedgenut cover attachment to provide clear, unhindered cover opening.

Mogul ex. Appleton BLB400m

The Mogul ex. Appleton BLB400m has a large body size that facilitates pulling of large and heavy conductors and are used as cast covers for providing additional wiring area. These are best used for pulling straight, 45° or 90° angle turns as well as for making taps and splices.

Form 8 ex. Crouse LB38

The Form 8 ex. Crouse LB38 is a 1” rigidly threaded conduit without cover and gasket made of Feraloy iron alloy. It is useful for indoor and outdoor use and comes in sizes ½” through 4”.

Form 9 ex. Crouse LB39

Recessed lighting is commonly used in rooms where ceiling height is an issue. These fixtures are essentially placed flush into your ceiling and project light from a hole or an opening on an otherwise clear plane.

Often you'll find this kind of lighting in an area that utilizes dropped ceilings with removable panels. Ceilings like these are usually implemented because they are concealing pipes or wiring that is exposed beneath the original ceiling - this practice can commonly be seen in basements and industrial spaces where aesthetics weren't initially taken into consideration.

Since recessed lighting is usually exposed to the underside of sensitive wiring or pipes, there are a number of potential dangers that present themselves when these fixtures are used.

A common mistake is using recessed lighting that produces too much heat for the amount of space left between the dropped ceiling and the original. Be sure when you're installing these devices that a qualified electrician, like the kind employed by John C. Flood, verifies there is enough ventilation and room between objects that excess heat won't make the area a fire hazard.

If you notice that you have a recessed lighting fixture which is dim and periodically flickers back to full brightness, this may be a sign that the wattage of the light bulb is too powerful for the lamp. Most recessed models will have heating sensors built in that automatically dim the light to avoid flames. One solution might be to lower the strength of the bulbs that you use in these features, although the bigger problem may be that your lighting instruments themselves were installed in too close quarters.

We all like using lights that we have collected over the years, but along with this also comes a great deal of responsibility. Please check any Christmas lights or decorations, such as wreaths, that light up for before they are used. The plastic or glass that surrounds the light should be intact, and should not contain any cracks or breaks. Please inspect the wires for tears fraying or damage.

If lights are being plugged in outside on the trees, roof top, doors, or driveway make sure you have enough electrical outlets. Do not overload your outlets and use only ground fault outlets as this will help to keep your lights and yourself safe, as they will most likely be exposed to wetness and moisture. Also make sure your extension cords do not become a tripping hazard.

When choosing a real tree, make sure it’s not too dry and not close to any candles. Christmas lights can be used to decorate real and synthetic Christmas trees. Lights should be in their best condition before being placed on the tree. Turn all Christmas lights and decorations off when you leave the house or go to bed to avoid electrical fire. Don’t use electrically powered ornaments or lights on metal decorative trees or decorations as the sharp edges may cut the cord and cause a shock and fire hazard. Due to heat danger keep your tree 3-4 feet away from fireplaces, electric heaters and floor registers.

4. Christmas “bubble” lights were popular in the 1950’s and contain coloured liquid. These should be kept away from children, as the covering of the lights can be broken, and children may attempt to drink the liquid inside. Strings of lights should be kept tucked away or taped to walls so that children cannot easily pull the cords and injure themselves or damage furniture.

5. LED’s are much more energy efficient and give off almost no heat. LED lights help protect from overloading outlets they are much safer and you can use more of them with the same available power source so your home will look like a Christmas wonderland!