You walk into your home and see the same things every day. You may see some dirty dishes in the sink or maybe notice you could use a little dusting in the living room. You look at the things that are right in front of you. You probably don’t actively look for things in the home that are hidden, but dangerous. It is important you spend a few minutes looking for and identifying any potential fire hazards in your home that may have gone unnoticed in the past. Having the help of an experienced electrician in Beverly Hills is a good idea. You can rely on the team at The Electric Connection to help you identify and repair any potential danger.

This is a list of 3 of the most common hazards that are lurking in your home.

1-Asbestos use was popular in home construction up until the mid 1970s. There are homes that still have this dangerous substance working in the insulation of attics, basements and in the walls. If you don’t know what asbestos looks like, it is always best to hire a professional to complete an inspection.

2-Faulty smoke detectors are another common issue. Many people adopt an out of sight, out of mind habit and forget the smoke detectors are even there. A Beverly Hills electrician can help eliminate that issue by installing hard-wired smoke detectors that rely on your home’s main electric panel.

3-Electric panels are another area of concern that should be inspected by an electrician. Beverly Hills homeowners may not even be aware their existing electric panel is on a list of recalls. There were numerous panels produced and installed throughout the 1980s and 1990s that have been proven to be dangerous and should be replaced.

If you suspect your home may have one of these hazards, it is a good idea to have an inspection completed by an electrician or an asbestos abatement company. Give The Electric Connection a call today and make sure your home isn’t hiding an electrical hazard.

Doesn’t it always feel like no matter how well you budget and save, you are always looking in your bank account for just a few extra dollars? Maybe you have already buttoned down your spending and can’t really find any other places in the budget where you can cut back. An electrician in Glendale is here to provide you with some tips that can help lighten the burden of your electric bill. We all know every little bit helps. You can always count on The Electric Connection to answer any questions you may have about energy savings.

1-If you haven’t already done it, get rid of those incandescent light bulbs and replace them with CFLs. You could easily save $15 to $20 a month (possibly more) on lighting costs.

2-Turn down your water heater a couple of degrees. There is really no reason to have scalding hot water coming out of the tap. You can save a few dollars by not making your water heater work overtime heating water to a temperature you will not be able to use it at.

3-Have a ceiling fan installed by an electrician. Glendale homeowners will soon realize the energy savings the fans provide in the winter and the summer.

4-Invest in heavy curtains to block out the heat of the sun in the summer and the cold draft in the winter. This will help cut down on your heating and cooling costs.

5-Skip the drying cycle on the dishwasher and let the dishes air dry or use a towel to dry them by hand.

6-Consider using a clothesline in the summer to dry your laundry. You can also use a drying rack inside the home to cut down on the need for the dryer.

These are just a few things you can do to help reduce your electricity bill. There are plenty of other ways you can save. Give The Electric Connection a call today to learn more.

Jewelry doesn’t sparkle and shine on its own – the reason a gem looks radiant is because of the way it reflects light! That being said, lighting is integral to retail design in a jewelry store. You want your displays to entice customers and show off your products in all their brilliance! Hopefully, we can help. This post will lay out options for various jewelry lighting displays.

puck lights to call attention to individual pieces, as seen in the photo to the right. Puck lighting above jewelry creates beautiful silhouettes and puts a spotlight on each piece.

If you love the look of evenly illuminated in-wall shelving displays, there is a way to avoid the spotlight effect. For a more subtle glow, install light fixtures on the inside edges of your shelves. See Xenon Low Voltage Light Strip or any of our

You’re showing off your most valuable items in the counter-style showcase, so it’s important to get the lighting right. However, make sure the actual light fixtures do not become focal points.

With a glass showcase, you need to integrate the lighting so that your display will shine, and so that it’s not blocked in any way by wires or lamp heads. The best way to do this is to install thin lighting strips inside the showcase, just below where the edge of the counter is. You can see an example in the photo to the right.

Our Your window display can be the number one determinant of store traffic. Like the counter showcase, it’s ideal if the light fixtures aren’t visible at all here so that your most alluring items take center stage.

You will likely have wall space to work with on all four sides of the window display, so it wouldn’t be too difficult to align microfluorescent fixtures against the edges for even illumination.

Depending on what types of items you are featuring, you might want to incorporate some spot lighting as well. You could use an adjustable adjustable recessed lights in the ceiling above the window display.

The MD, DC, and VA area is known for getting slammed with violent and powerful thunderstorms that produce severe lightning. Electrical surges, which are caused by lightning, can wreak havoc on your expensive electronics and appliances.

A lightning strike that hits a power line several miles away from your house can impact all your electronic items. Whole-house surge protection is the best option you have to protect your home electronics and wiring from the damage caused by lightning strikes.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. As a homeowner, the good news for you is that protection is readily available, and even top-of-the-line solutions are affordable. The gold standard in whole-house surge protection is a two-tiered system—a whole-house surge protective device, or SPD, installed at the circuit breaker box, and plug-in SPDs on individual outlets. A whole-house SPD can protect against up to 40,000 amps of current flowing into your home from the outside; normal household power is between 200 to 300 amps. When an electrical surge occurs as a result of a lightning strike, the device detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Whole-house surge protection can typically be installed in a home for around $200—it’s an easy job for a top electrician. The cost of replacing electronic equipment in an average home is a whopping $8,000, and it may be even higher for homes in MD, DC, and VA. Whole-house surge protection is cheap insurance against electrical surges caused by lightning strikes. It provides a layer of protection to all the electronic items in your home.

To ensure complete safety, Kolb Electric recommends that you allow a qualified, experienced electrician to complete the wiring for whole-house surge protection—there are several steps involved that are best left to a professional.

If you require surge protection wiring or want a full whole-house surge protection installation, contact Kolb Electric.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.