Did you know that proper surge protection could help avoid short circuits and fire hazards?  In fact, using up-to-date surge protectors (suppressors) for your appliances, or even your entire house, could save you thousands of dollars in property damage. These are just a few reasons why surge protection should be of the utmost importance for you and your home this holiday season.

What are power surges?

First, before diving deeper into the different advantages of protecting your home against power surges, it’s important to understand what electrical surges are, and why they’re such a concern. An electrical surge, also known as a “voltage surge”, is an electrical disturbance that can be caused by a variety of spikes in voltage. More specifically, these surges are usually caused by lightning strikes, power outages, short circuits, or tripped circuit breakers. Problems occur when these short spikes in electrical power overload circuits in home appliances and other electronics.

Why is it so important to protect your home against power surges?

For starters, power surges can be very dangerous for you, your family, and your house. Surges are one of the most common causes of house fires, usually resulting from a combination of faulty wiring and irresponsible electronics hook-up by homeowners. This is especially apparent around the holidays.

Lighting is a critical aspect in a number of industries such as manufacturing, mining, marine, packaging, and even sports. Electrical fixtures for such industries are designed for heavy duty performance and can last even in the most adverse conditions such as extreme temperatures and climate.

Apart from ensuring proper lightening and enhancing the output, electrical lighting also helps in maintaining safety in your workplace. If you have a well-lit work space, then your workers can avoid unwarranted accidents like stepping on sharp tools, bumping into equipment, etc. You can use a wide range of electrical light fixtures such as LED, magnification lights, fluorescent lamps, halogen machine lighting, etc.

You must choose the right light fixtures based on the environment you work in and the lighting demands of the space where you need to install them. Let us look at some industrial lighting fixtures that are available.

5 Types of Industrial Lighting Fixtures

In industries like mining, transportation, steel, marine, etc., there are high risks of explosions which you cannot overlook at any cost. You have to make sure that the lighting fixtures have the ability to withstand the heat and pressures that are generated by an explosion. Explosion proof fixtures meet some of the most stringent quality standards of the National Electric Code.

Indoor fixtures can be installed in a number of indoor work areas like workshops, workstations, bays, etc. As different work environments have different requirements for lighting systems, it would be ideal to contact a supplier who can offer you customized lighting requirements. Ensure that the lighting systems are capable of withstanding harsh working conditions as well as extreme temperatures.

Roadway fixtures are ideal for places where you need high mast lighting. Safety is extremely important on the roads and is of major concern for the protection of all those present on the road, which is why you need a brightly lit road. You can control the amount of light generated by these roadway fixtures to make them brighter or dimmer, based on the time of the day they are being switched on.

Every sports ground requires proper lighting. It isn’t a pleasant experience for the spectators when they can’t clearly see what’s going on in the ground/field and it would equally hinder the players from performing well if the lighting is compromised. Regardless of which sport it is, be it tennis, football, cricket, basketball or rugby, flood lights are an indispensable part.

Places like nuclear plants, mining fields, oil rigs and underwater operations require high quality and failure-free lighting solutions. It is important that there are various kinds of light sources as well as lights so that the work doesn’t halt due to lighting failure of any kind. Ideally, you must not use regular industrial lighting fixtures in such places. Make sure the lighting you use are reliable, have a long life and have low maintenance costs.

Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

There are instances where NEC and other regulators recommend dedicated circuits for certain loads. Typical loads to put on individual branch circuits include sensitive electronic equipment such as computers. In addition, water heating systems, large appliances, and other high capacity loads that zap power require a dedicated circuit.

Run cables all the way to the main service panel and avoid connecting to other existing circuits. The same conductor size should be used throughout the branch circuit.

Electric water heaters, HVAC equipment, hot tubs and other appliances should each have a nearby disconnect that is easily visible and accessible. The power disconnect can be provided by the main or sub panel breaker, a dedicated switch, or a power cord that can be unplugged.

The branch circuits should have adequate current carrying capacity, adequate and grounding.

Typical branch currents include:

Outdoor lighting provides homeowners with the ability to make their property safe and easier to walk around at night. Not only will you feel more comfortable knowing what’s in your front yard, but you will also add visual appeal to your home too. If you want to improve outdoor safety through lighting, and at the same time add a little character to the outside of your home, then follow along to understand the potential upgrades you can make for outdoor lighting options.