Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Ready.gov recommends that you keep an emergency kit in your car with a few essentials:

When branches become heavy with ice and fall on power lines, many are left without electricity and need to find alternate sources for keeping their home warm and safe.

If you live in the South, you know this: if it snows, you can pretty much count on school being cancelled. By about day three of last week’s #snowcation, videos started popping up in my news feed of kids dancing on kitchen tables and singing their 800th rendition of “Let It Go” while frazzled parents held onto their sanity. What’s a parent to do? The web is full of great ideas that creative parents have come up with, but here are a few of my favorites:

Growing up in North Carolina, the novelty of a real winter snowfall still catches me by surprise. By being as prepared as I can, I’m able to spend time enjoying the magic of winter with my family. How do you prepare for a winter storm? Do you have any creative ideas for keeping home-bound kiddos entertained?

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.

When it comes to residential electrical work, most people just call up an electrician without a second thought. And for good reason – working with electricity can be difficult and dangerous if not done properly. However, there are some simple jobs that amateur electricians can perform on their own if they have basic tools and experience. Read on for tips on how to run electrical wiring behind your walls without tearing up your home.

Low Voltage Track and Rail Lighting Systems for 2013

Your Guide to Outstanding Low Voltage Lighting Installation 2013

You cannot beat the versatility and design of innovative low-voltage track and rail lighting systems.  New compositions and energy-efficient options are extraordinary and may be custom-designed to blend seamlessly with changes in your decorative environment.

Far from the industrial-sized straight runs and bulky fixture heads of the past, new track and rail lighting systems are elegant and balanced to beautifully illuminate both traditional and modern settings.

Top 5 Reasons to Update with Low Voltage Lighting Systems

1.  More Economical:  Because low voltage lighting systems function on 12 volts of electricity rather than the standard 120 volts, low voltage lighting uses less energy, and smaller low voltage track heads deliver light more efficiently.

2.  Easy installation: From colorful and vibrant glass pendants to sleek metallic spot light fixtures, track and rail systems are easy to install and maintain. The monorail system is the most basic and easiest to install; consisting of a single line of electrical cable that may be installed in straight runs or custom designed in a unique configuration.

3.  Safer Operation:  Low voltage lighting requires a transformer to “step down” the 120-volt standard to a 12-volt system; and, the reduced 12-volt system eliminates the risk of electrical shock.  Because of the reduced risk of electrical shock and safer operation, low voltage lighting may incur fewer required inspections.

4.  Greater Flexibility:  Unlike other ceiling fixtures where a lighting design in required before you begin construction, low voltage track and rail lighting systems provide the flexibility to update your home lighting design as you can afford. You may choose to do one segment at a time, and add to the design as your needs and budget allow.

5.  Superlative Lighting Designs: Low voltage track heads and light fixtures are available in a myriad of styles and sizes.  They are made to accommodate compact light sources that are as bright as 120-volt bulbs but in a smaller fixture. Most of the bulbs used in low voltage lighting are more than twice as bright as regular incandescent bulbs of the same wattage.

FAQ’s

HOW MUCH WILL IT COST?

-The cost to install low voltage lighting currently runs on average between $150-$220 per fixture.  Material and labor costs vary according to hourly labor wage restrictions, specific project size and the number of fixtures needed.  It is a good idea to get a few estimates before hiring an electrical contractor for your low-voltage lighting installation.  Estimated costs should include all materials, as well as delivery charges for equipment and costs to prepare, protect or repair existing structures. (Permit and inspection fees are usually additional charges that may be involved with certain lighting installations.)

-Low voltage track and rail lights operate on a system equipped with a transformer. Since standard lighting installations run on outlet and junction boxes that provide 120 volts of electricity (in the US and Canada), the transformer serves to “step-down” or decrease the voltage from standard line voltage (120 volts) to low voltage (12 volts).

-Low voltage fixtures, bulbs and dimmers are generally more expensive than line voltage systems due to the transformers that are included as part of the fixture’s electrical construction; Although low voltage installations may be more expensive than line voltage systems, lifetime operating costs are lower due to energy savings and lower maintenance costs.

WHAT TYPE OF LIGHT SOURCE WORKS BEST IN A LOW VOLTAGE TRACK HEAD?

-Although there are some good compact fluorescent lamps that may be used in low voltage track fixtures, halogen bulbs are still the most popular choice.

-Low voltage halogen lamps contain filaments that are shorter and fatter, so the illumination is precise, crisp and luxuriant.  These lamps are available in a variety of beam spreads offering over 20 variations in any given wattage, ranging from super narrow spot lights to full-spectrum flood lights.

-The most common lamps or light sources used in low voltage track heads are PAR 36 and MR 16 halogen light bulbs.

CAN I UPGRADE MY TRACK FIXTURES WITH LED (LIGHT EMITTING DIODE) LAMPS?

-LED (light emitting diode) low voltage lamps are compact solid-state light sources that provide cool focused task light.  LEDs last 10,000-100,000 hours and use very little electricity.  With future production, LED lamps may become more affordable and the standard go-to choice in track and rail systems.  *Rather than a transformer, LED bulbs require a “driver” to convert from standard to low-voltage.

 With a state-of-the art low voltage system, you may custom design formations with imagination and creativity and the possibilities are endless…

-Use straight runs of track to highlight displays in a gallery or down a corridor.

-Make a design statement and provide the perfect task light with hand-painted low voltage pendant lights over kitchen islands, bath vanities or night tables.

-Highlight the sparkle in crystal and provide accent light to an elegantly set table with low voltage rail lighting.

-Expand your space with hand-bendable rail fit to accommodate rooms with limited ceiling space or rooms where electrical junction boxes are  inconveniently located. The beauty of track is that it may be custom measured and easily cut to fit your exact specifications.

*Especially suitable for savvy renovation projects, such as older New York City apartments that may have one junction box in the ceiling:  Track and rail lighting configurations can do it all, providing general, task and accent lighting.

-Track lighting systems are even being used to power residential garage space with functional and inviting illumination; Showcase expensive automobiles and provide excellent task lighting to a workbench or hobby station with streamlined track lighting.

Low Voltage Track Systems from Start to Finish

GETTING ON BOARD: YOUR TRACK  7-STEP SYSTEM

-Although, electrically-speaking, track runs must work as separate units, multiple track and rail layouts may be connected to appear as one system.  An isolating connector is used to power each section.

-A floating canopy connector may be installed anywhere along the track and covers a junction box while providing power to the system.

-A live end connector may be used if you are running wires directly into the track without using a junction box.

-You may also power the system at any connecting point (straight, angled, T-junction, etc.) where the connector has a power feed entry point.

-A junction box may also be used at any of these power entry points; a canopy cover plate should cover the entry points for aesthetic, as well as safety reasons.

Basic guidelines to ensure safety and effortless performance of low voltage track heads:

-Most track and rail systems are installed directly into the ceiling and mounting hardware should be included.

-Systems that are suspended from the ceiling require adaptable suspension hardware.

-Low voltage track heads are made to slide directly onto the track and repositioned easily.  End caps should be included in the installation for a clean finish.

-Low voltage track fixtures may be placed on line voltage track systems by using a track connector with a transformer installed to lower the voltage of the track system.

-Voltage drop:  On longer track runs, you may notice a decrease in brightness the farther away the low-voltage head is located from the transformer.  With remote transformers, voltage drop is dependent on the number of fixtures on a system, the length of track, and the length and gauge of wire from the transformer to the power feed.

– Be sure to mix and match fixtures within the same systems; check for compatibility when trying to interchange fixtures from different track and rail systems.

-PAR bulbs and MR16 low-voltage halogen are available in a variety of beam spreads.  Wide-angle bulbs are great for general illumination; narrow spotlights are good for task and accent lighting.  Track head accessories and special lenses may be added for increased directional and colorful effects.

Track or rail systems allow you to create an original lighting design to perfectly illuminate your home. Capitol Lighting offers track and rail lighting systems, accessories and compatible light fixtures from top brands like LBL Lighting, WAC Lighting, Kichler Lighting, Tech Lighting and Wilmette Lighting.

Top Pics include:

TECH LIGHTING MONORAIL 

Low voltage track and rail systems that twirl, bend and twist are available in choice finishes.

‘

EUROFASE Cable Lighting

Energy-efficient 4-light Design Pro LED Rail Lights from Kichler accommodate installation on the wall or ceiling.  They are fully dimmable and Energy Star-rated.

Industrial-inspired head with proprietary 5.8 watt LED module. It is easily field upgradeable and replaceable similar to a medium-base socket, though it utilizes a dedicated base. The heat sink remains with the fixture minimizing any waste at the end of life. Rotates 360°, pivots 90°.

“Clamps to Wall MonoRail. 18″” long with 3″” high gentle curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts not included). For Wall MonoRail system only.”

With the latest track and rail lighting innovations, the flexibility to redecorate with light is intrinsic. Adjust your lighting design with ease by adding new track segments or repositioning adjustable fixture heads.  Transform your guest room into a nursery with whimsical designer pendants or upgrade your hallway with sleek metallic low voltage track heads.

Low voltage track and rail lighting fixtures are brilliantly engineered to adapt to modifications in your décor and furniture placement; lighting may be reconfigured and beam spreads refocused to highlight artwork and illuminate your home safely and purposefully to bring out the best in a new design scheme.