If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.

If you’re in the midst of a renovation or simply rearranging your floor plan, then you’ve likely come across the need to add or relocate a light fixture. Maybe your new dining room table is a little wider than the old one, you’re adding a kitchen island with pendant lights, or you’ve finally convinced your significant other to let you get that pool table you’ve always wanted. In any case, you need to move or add a light fixture – but how and when?

First, it should be noted that, contrary to how it may seem, most light fixtures are not connected to a joist or even drilled into wood. Instead, hanging light fixtures and ceiling lights alike are located between joists and supported by electrical boxes that grip a wide surface area of the sheetrock that makes up your ceiling to support the weight of the fixture below; for heavier fixtures, like large chandeliers or ceiling fans, there are larger, even joist-secured boxes that will need to be used.

If you’re moving a light fixture, it is important to note that there are certain limitations as to where the fixture itself can go. If you wish to relocate the fixture to a place where a joist exists just above, then you’re likely going to have to use a swag hook and chain to anchor the fixture in place, as a box under a joist is not an option. That said, if you’re moving the housing for the fixture itself, you’ll need to know which direction the joists above run, then choose to move it either through the same joist cavity or drill through a joist to run the current wiring to the new housing. Other things to consider include which switch controls the light and where it is located, as it is a safe bet that a wire will have already crossed all joists above (at some point). This can prevent your electrician from drilling needlessly by allowing them to fish the wire back to the earlier point. If your switch is further away than the destination, you can bet they’ll have to do some drilling. Jumping through, between, and around the joists in the ceiling represents the largest obstacle your electrician (and light fixture) will face.

Once your location is set, all that is left is to get your electrician out to assess and perform the work for moving your box. If you’re planning on doing one large fixture over a pool table, island, or entire room, then you’ll want to take into account the power output of the fixture compared to what that circuit can safely allow for as well as the weight of the fixture. A typical rule of thumb is that anything under about 35 pounds can be handled by a standard drywall box, but something more (or with a fan) will need extra stabilization. Surprisingly, if you’re running numerous small pendant lights, the electrician may have an even easier time running the circuit and ensuring that your lights are up and running in no time. Just be sure to discuss the fixtures you have in mind with your electrician before you purchase them to know what they believe your limitations are!

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.

The electrical panel inside of your home or office is where the breakers (or sometimes called switches) are located.  This is the “heart” of your electrical system.  Just like the heart inside of your body, if this major organ does not work properly, your blood circulation and limbs don’t stand a chance.  You could look at your electrical wiring as being your blood vessels and your appliances as being your limbs.  If your electrical panel, “aka” heart, is healthy and strong, your electrical wiring will operate properly, allowing all of your appliances to last longer.  Beware of old electrical panels; these could become a hazardto your home or business.