As a Top Plano Electrician, I know better than anyone how powerful and useful electricity is. It also makes me more aware of what most people tend to ignore or forget: electricity is dangerous. Electricians are required by law to carry insurance, and for good reasons. Electric current is capable of starting fires and destroying your property and equipment in a matter of moments. The proper safety precautions really can save lives, and there‘s always something we can do to improve home safety.

One of the most important precautions is located in your electrical panel: the circuit breaker. It is designed to keep you from using more electricity than the wiring or receptacle can handle at one time, what we refer to as overcurrent protection. This protects your wiring from taking on too much current, which can cause the coating around your wiring to melt, the leading cause of electrical fires. Circuit breakers serve another purpose as well; not only to protect from surges coming from outside your home, but from potential hazards within it as well. Current flowing through a failed piece of equipment or appliance can cause sparks, which have the potential to start fires or damage other electrical devices. A properly functioning circuit breaker can shut off the power to this device. It’s very important, however, that you use a circuit breaker of the proper size for the circuit to ensure that your wiring is properly protected.

Circuit breakers come in specialty varieties as well; the most important are ground fault circuit breakers (GFCI), for wet locations, and arc fault circuit breakers (AFCI). AFCI’s, in particular, can help prevent some of the most common dangerous situations in your home.

I’ve dealt with plenty of cases where electrical fires have started because people ran an extension cord under the carpet, so that they can power the lamp in the center of the room. Over time, people walking over the cord stretches out the wiring, making it so thin that the current overloads the thinly stretched wire, creating an arc fault; the electricity “jumps” the wire, completing the circuit in a way the cord can’t handle and generating heat that starts a fire. Arc fault circuit breakers prevent this by shutting the circuit down when the arc fault occurs.

So what do you need to know about arc fault circuit breakers? To start with, by code AFCI’s should be installed on any circuit that isn’t protected by a GFCI or directly wired into an appliance. It’s in your best interest to have your safety devices routinely inspected to maintain their optimum performance and capabilities; in particular, your circuit breakers should be inspected at least once a year. The inspection process is quick and relatively inexpensive, and something that simple really can save the lives of you and your family.

There is a very dangerous myth floating around, one which could actually result in severe injury and even death – “Electricity always follows the path of least resistance”. This is one of those myths that results from a general fact being blown way out of proportion.

Forget colleges and engineering schools, most high school students learn that electricity does behave this way, as a part of the basics of electricity and resistances. Worryingly, this myth isn’t just stated as a fact, it’s a commonly followed practice in many electrical circuit designs, especially when it comes to grounding.

Walk into any industrial plant that uses motors or pumps and you’ll find they’re all connected to ground rods. Ask anyone why that’s done and you’ll likely get the same response everywhere (even from the people in charge of the electrical maintenance) – It’s to eliminate the potential differences.

The relationship between weather and energy usage is a never-ending cycle. Spikes and drops in temperature and humidity lead to spikes and drops in energy use (and costs), which in turn correspond with spikes and drops in greenhouse gas emissions, further affecting climate. What does this relationship mean when it comes to your energy usage?

Temperatures above 100 and below 40 stress your heating and cooling system, pushing it to capacity, reducing efficiency, and draining energy supplies, along with your wallet. Quite simply, this amounts to less bang for your buck in terms of comfort. Add to temperature issues, wind, cloud cover, and precipitation and the snowball effect continues, further impacting comfort levels, not to mention your ability to illuminate interior spaces. Compound the issues – and the population affected – and you’ve got grid strain to boot.

That depends on the source of energy. In the US, 83 percent of energy usage comes from fossil fuels, which release gases such as CO2 into the environment during the creation of energy. Unfortunately, these gases trap heat in the atmosphere. Atmospheric greenhouse gases have increased 30 percent since the pre-Industrial Revolution era alone, and the level continues to rise with energy demand. As levels increase, so does the effect on the environment. Thousands of scientists agree the trapped gases are currently affecting the climate, and will increasingly weigh on it as time goes on. This has resulted in an increase in interest in cleaner forms of energy, including nuclear, solar, wind, and geothermal.

We all want to save a little money and these days, it is more prudent than ever to do whatever we can to save a few dollars in the family budget. As you look at your budget and think of ways to cut costs, you have probably laid your eye on that electric bill a time or two wondering how you could make it just a little less. If this is you, then try these tips from your electrician Santa Monica home and business owners can save a few dollars by following these simple things.

1-Replace your halogen lightbulbs with CFL bulbs. The bulbs cost a bit more initially, but they are more energy efficient and they will last 13x longer than the cheaper bulbs, which actually makes them cheaper in the long run.

2-Stop phantom energy draws by unplugging appliances, cellphone chargers, and electronics when they are not in use. These draw very little energy, but when you add up the 10 to 20 things that are probably plugged in right now, it certainly adds up quick.

3-Replace appliances with energy efficient appliances. This is a big investment at first, but overtime it will save you money. Look for those with the Energy Star sticker.

4-Install a ceiling fan to cut down on the heating and cooling needs. This is a job for your electrician. Santa Monica residents can turn up or down the thermostat a couple of degrees and rely on the ceiling fan to circulate the air.

5-Only run full loads in the dishwasher and washing machine. This cuts down on the frequency in which you run the appliance and therefore, can save you a few dollars.

If you would like more tips on how you can save money on your electric bill, give The Electric Connection a call today.