If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

ElectricMan Inc. is one of Plano’s most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

It’s impossible to anticipate a breakdown or roadside emergency, which is why it’s important to always be prepared. Already equipped with a spare tire, first-aid kit, and jumper cables in the trunk? They might not be of much help if disaster strikes after dark, and you have no viable light source to illuminate the problem.

We recently added a few new products to the website designed for road safety. Our LED Trouble Light makes it easy to check under the hood, and it’s a handy tool to keep in your car. With 16 LEDs on the side of the thin wand, a flashlight-style spotlight on the tip, and an integrated laser pointer, it’s definitely a sophisticated flashlight.

What is a spotlight? What is a floodlight? Knowing the difference between the two is important for properly lighting any application. Before you can understand the difference, you must know what a beam pattern is. Beam angle or pattern is a measurement of the angles that are formed between a cone of light’s brightest point (the center) and the points on both sides of the center where the light’s intensity is 50 percent as bright.

PAR30 bulb that is available with a spot or flood beam pattern.

Fixtures, such as retrofit LED can lights may also look similar to one another while functioning as either spotlights or floodlights. Some light bars are even capable of emitting flood, spot, or combination beams. There are, however, certain fixtures that we imagine when we think of floodlights and spotlights.

hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

By Maddie Ogletree

What goes on behind the scenes of March Madness often goes unmentioned. The action is up front, while the lights and cameras are working hard in the background. Some major aspects of the March Madness experience happen without a hitch, and sometimes they’re the hardest to manage. No wonder there was a lighting mishap during the Super Bowl in 2013.

Amidst all the madness this March, take a moment to notice the electrical components powering the stadiums, such as:

The music and sound effects heard during the event can all be attributed to the thousands of cables running throughout stadiums across the country, linking the AV control rooms to the speakers above the court. When stadiums are built, every single cable is intricately installed to enable you to experience the sights and sounds of March Madness the way you’re able. Lucas Oil Stadium in Indianapolis, host of the Final Four and championship games, reports about 764,000 cables in their audio and video setup alone!

To ensure that the arena doesn’t go dark mid-play, backup generators are a must to make sure everything runs smoothly during the games. It might not be the first concern to pop into your mind, but in an emergency or accidental power failure backup generators are the heroes of the game. Most arenas are prepared for these events and have multiple generators ready to go in the event of a power failure.

How the stadium stays perfectly lit is not often considered, but it’s a necessity for these games that can be tough to power. Recently, NRG Stadium in Houston, Texas updated their lighting to a more sustainable system. The new system draws 337 kilowatts of energy at full power – 60 percent less than their previous system. That’s huge, especially when their stadium now houses more than 65,000 LEDs. Imagine keeping all of those lights functioning properly during the entire South Regional game.

Keeping up with the scores at games is easy with the giant screens present at every modern sports arena. But most people don’t realize the energy that is needed to show those replays on the big screen. While it does take quite a bit of energy, arenas are starting to focus on using sustainable sources of energy. The Moda Center, which will be hosting second and third round games for this year’s March Madness, purchases 100 percent renewable energy programs.