Depending on the size of the warehouse we are discussing; the energy costs related to the lighting withing and even outside the warehouse can vary. But no matter what size, shape, or capacity a warehouse operation runs out of they all have one thing in common and that’s lighting expenses.

This is a common struggle for facility managers: trying to save money with the money that they have. And upgrading or investing in a new lighting system although can save money and produce a positive ROI overtime; can cause troubles considering it costs money upfront.

This post is here to identify the main points and benefits of a good lighting technology (LED), how it can improve a warehouse or factory facility, and how you can actually cut the upfront investment costs down significantly to make the investment even more-so worthwhile.

Improve safety through a better lighting system. In almost every aspect of the word quality; LED is the winner, especially in industrial applications. Firstly, if you’ve ever (or are currently) experiencing an issue with flickering or buzzing lights inside or out of your facility: you most like have metal halide or HPS fixtures in place. With LED they will never flicker or buzz not even near the ending of their lifespan.

Secondly, if you are experiencing an issue with dim lights just a few years after you’ve installed your MH or HPS light sources; you are experiencing a negative side effect of having these technologies. They are susceptible to higher lumen depreciation at a much faster rate than LED products do. Don’t get it wrong though, LED products still do safely and securely.

Decrease lighting bill costs. Did you know that you are burning up energy that you don’t really have to be burning up? It’s true, technologies such as metal halide are literally eating up 50% more energy than you would be with LED products installed. If you could reduce your lighting bill costs by 50% or more, what benefits could you see? For starters it would improve your bottom line. Otherwise, if you are proud to be a green company this could be just another way to further that mission and prove you are doing everything is takes to cut down on waste as much as possible. The list could go on but the main benefit that makes almost every person want to make the switch to LED is the 50% or more reduction in lighting costs month to month.

More Ways to Decrease Your Lighting Costs

Here we list a few ways that you can actually decrease your investment cost on a new LED lighting system in your DesignLights Consortium is, in basic terms, your rebate will more likely be better than just DLC standard.

Longer bulb life = Less Maintenance. LED technology is know to last 2-3 or even 4 times longer than other light sources out there. By upgrading to an LED system in your warehouse you are reducing the amount of times you need to pay someone to replace your burnt out lights. This can get especially pricey since most warehouses have high bay lighting which is typically high in the air. If you have 30, 40, or 50+ lights this can get very expensive for a warehouse facility. By opting in for a longer life light source (such as LED) you are going to reduce your maintenance costs dramatically (by 2-3 times).

Some Common Questions

Here are some very common questions that we are asked regarding lighting for a warehouse:

What exactly are the lighting fixtures used in warehouses and factories?

While an office in a warehouse will use the same lighting as any other office would (panels and tubes), the main floor and area of the warehouse is what we are talking about.

Typically people install high ceiling spaces.

What is a retrofit? And should I retrofit?

Going green is no longer an inconvenience.  The fuel cost savings alone makes buying an electric vehicle a wise economic decision.  Let alone the environmental benefits.  Now add on the current $7500 federal tax credit on top of what several states offer and you have huge savings!  Not only do we carry the seal of a  Green Screened electrical contractor.  We are also authorized to install Tesla Charging stations.  These charging stations are not a do it yourself installation.  Tesla recommends hiring a licensed electrician and also a authorized Tesla electrician for installation.

Did you know there is a Tesla SUPER CHARGER located at the Hy – Vee on Jordan Creek Pkwy.  Currently its the only one in Central Iowa and 1 of 3 in the State of Iowa.  However plans are underway for additional charging stations.  The united states is covered with Tesla super chargers.  In fact to date Tesla says there is a total of 744 supercharger stations with 4,703 superchargers.  At a super charger location you can charge up to 170 miles in as little as 30 minutes.  Plug your Tesla in and grab a Starbucks or do some grocery shopping!

If you are looking for a Garland electrician, be sure to find one who cares enough about safety to help determine if your home is up to par. Some older homes often lack basic precautionary features that are inexpensive, yet vital to the safety of the family. One of these features is the GFCI, and any Garland electrician should be able to determine if your home has one.

Recently in Texas, a family experienced a heartbreaking illustration of what can happen without a GFCI. The mother was bathing her two children, ages five and six, when a hairdryer that was plugged into a nearby outlet fell into the tub. Both children were killed by the electrical current passing into the bathwater.

One of the most horrifying things about this story is that this accident was preventable! Installing a Ground Fault Circuit Interrupter, or GFCI, could have saved these children’s lives, at a cost of less than $60. The circuit in their bathroom was not equipped with this simple piece of equipment, simply because their home was an older home.

When the electrical current is imbalanced, it indicates that the current is passing through something that it is not intended to pass through. A GFCI handles that situation by quickly interrupting the flow of current before it can do harm. Water is an especially dangerous conductor of current, so a GFCI should be installed everywhere that an electrical device might be plugged in near water. This means that GFCIs should be on outlets in not only kitchens and bathrooms, but also in garages, outside, near countertops, and near hot tubs and pools. While a layperson might not realize that, an electrician should. That is why, whether you are looking for a Dallas, Garland, or Rowlett electrician, you should make sure to find one with enough experience to spot potential hazards before they cause tragic results.

One of the best Garland electrical teams you will find is the crew at ElectricMan, Inc. Available twenty-four hours a day, seven days a week, ElectricMan’s team is made up of trained electricians who care about the safety of families. To learn more about finding an electrician Garland homeowners can trust, visit the website. For a deeper connection, join the online community on ElectricMan’s social sites, or call (972)792-7270.