Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

When it comes to DIY jobs, electrical wiring is one thing that you should avoid. Most wiring or rewiring jobs are incredibly complex, and require the expertise of trained and licensed professional electricians, such as the members of our staff. You also don’t want to trust this job to an amateur or a general “handyman” as they most likely lack the necessary training to do the job right.

One of the most popular rewiring jobs people choose to proceed with is finishing their basement, which requires a good amount of rewiring throughout. Keep reading to learn more about what this type of job requires, and why you should only trust the professionals to complete it.

Even the smallest drip coming through your below-grade walls can create a problem. You’ll want to have the outside checked to ensure that the ground is graded away from your foundation, and also will want to check for cracks in your foundation walls and have that damage repaired if necessary.

Chances are, you don’t know the local building codes in your area. Many times, you’ll need to get building permits to make any electrical changes to this room of your home, as that room may need to be inspected before the job begins. Our electricians are aware of these rules and will take the necessary steps to ensure the job is done correctly.

A drop, or suspended, ceiling is one that is lower than the natural ceiling of your basement. This allows you to conceal any new plumbing that is put in, as well as electrical components such as wires. The good news is, there are plenty of attractive options for these types of ceilings. This also allows you to give your lighting a recess, which allows you more space for light fixtures.

As tempting as it may be to finish your entire basement, keeping the space housing your HVAC units and water heater clear, open, and unfinished is a good idea. That’s because these spaces have specific code requirements, plus your service professionals will need access for maintenance and repairs.

Most kids are extremely curious and want to know how things work and will also take items apart if they are able to; it’s no different when they are around electrical fittings, fixtures and appliances. If you have toddlers in your home, it’s best to get electrical safety fittings installed where there are powerpoints and electrical outlets. However, if you have slightly older kids, it’s important that you teach your kids some basic electrical safety; here are some tips you can keep in view:

If you are concerned about your kids playing safely and without any accidents around electrical installations, fixtures and appliances either in the indoor and outdoor areas of your home or in the neighbouring areas, here are pointers you should go over with them:

By Maddie Ogletree

What goes on behind the scenes of March Madness often goes unmentioned. The action is up front, while the lights and cameras are working hard in the background. Some major aspects of the March Madness experience happen without a hitch, and sometimes they’re the hardest to manage. No wonder there was a lighting mishap during the Super Bowl in 2013.

Amidst all the madness this March, take a moment to notice the electrical components powering the stadiums, such as:

The music and sound effects heard during the event can all be attributed to the thousands of cables running throughout stadiums across the country, linking the AV control rooms to the speakers above the court. When stadiums are built, every single cable is intricately installed to enable you to experience the sights and sounds of March Madness the way you’re able. Lucas Oil Stadium in Indianapolis, host of the Final Four and championship games, reports about 764,000 cables in their audio and video setup alone!

To ensure that the arena doesn’t go dark mid-play, backup generators are a must to make sure everything runs smoothly during the games. It might not be the first concern to pop into your mind, but in an emergency or accidental power failure backup generators are the heroes of the game. Most arenas are prepared for these events and have multiple generators ready to go in the event of a power failure.

How the stadium stays perfectly lit is not often considered, but it’s a necessity for these games that can be tough to power. Recently, NRG Stadium in Houston, Texas updated their lighting to a more sustainable system. The new system draws 337 kilowatts of energy at full power – 60 percent less than their previous system. That’s huge, especially when their stadium now houses more than 65,000 LEDs. Imagine keeping all of those lights functioning properly during the entire South Regional game.

Keeping up with the scores at games is easy with the giant screens present at every modern sports arena. But most people don’t realize the energy that is needed to show those replays on the big screen. While it does take quite a bit of energy, arenas are starting to focus on using sustainable sources of energy. The Moda Center, which will be hosting second and third round games for this year’s March Madness, purchases 100 percent renewable energy programs.