We get a lot of calls for fluorescent light repair here at Expert Electric. But before calling, always remember that if your fluorescent light fixture is burnt out or flickering, first change the bulbs (fluorescent tubes) to see if this corrects the problem and also save yourself some money. If you are not comfortable changing the bulbs due to location or any other safety concern, we would be very happy to help you. If your fluorescent fixture still does not light up after changing the bulbs then the problem is most likely faulty ballast, or less commonly a possible wiring issue.

Fluorescent light is the product of two components: the lamp and the ballast. The role of the ballast is to boost voltage for short duration; the ballast will then maintain a constant applied limited current to properly operate the lamp. You must use the proper ballast for each type of fluorescent bulb. Bulb types are T12, T8, and HO. While it is tempting to install higher efficiency fluorescent lamps (like T12s or T8s), we must pay special attention to the type of ballast installed in the light fixture or those bulbs will not operate properly.

The ballast technology has improved a lot in the last 15 years.  If you are not upgrading your ballast you won’t see the potential energy savings that efficient fluorescent lighting can provide. The new electronic ballasts operate differently from older electro-magnetic ballasts. They don’t just save you money but out-perform magnetic technology in several ways.

Higher Efficiency: New electronic ballasts provide you with more light and cost less to operate, saving you money and helping the environment. Dimming is also easier with electronic ballasts.

More Control: Electronic ballasts can be manufactured to under drive or overdrive the lamps they support, producing more or less light. This allows you to adjust which areas need more light and which need less light. The lighting pattern can now be changed due to work patterns and specific lighting requirements.

Dimmer Switches: Dimming is also easier with electronic ballasts. Preset your dimmer and it can cut your light by 50% and this will save you money as well.

Less Heat Emission: Electronic solid-state ballasts produce less heat than electromagnetic type ballast. What this means is if you are operating cooling equipment, such as food coolers or air conditioning during summer the electronic ballasts will help you save on cooling costs.

The best part is that with the higher frequency electronic ballasts, there is no flicker or buzz. There are many benefits to high efficient ballasts and we recommend you take advantage of them.

Prisons and correctional facilities are full of security threats, it’s just common sense.

That is why it’s a major task and a seemingly forever ongoing one to try everything in the book to reduce threats and increase security for everyone in, near, or even outside the facility.

Today we wanted to address how we can solve 2 major correctional lighting system and things you should look out for when finding fixtures perfect for your building and budget.

Firstly, a LED prison lighting system will reduce indirect stress and irritability in both inmates and staff.

Secondly, LEDs within correctional buildings will improve detection of movement, which we all know is crucial.

How you ask? Well, lets talk about each one individually and break it down a bit more than just one sentence. From there, we will talk about how to go about making the conversion over to LED, like we mentioned at the start.

Have you ever been around a light that was flickering and or buzzing? It can get annoying, and fast. Imagine living under these conditions, everyday all day; no break other than a few hours when you go outside. Sounds like no fun, and it can lead to some serious stress and irritability issues for both inmates and staff.

For obvious reasons, additional stress on inmates will never produce a good outcome for anyone. But, another important point is that this can effect your staff and guards too. It can affect their ability to perform at full capacity, which in combination with highly irritable inmates is not a good mix whatsoever.

With LED technology, they will never be susceptible to flickering nor buzzing. Not even near the end of the lights lifespan will they flicker or buzz, unlike other technologies commonly still used in such facilities. Thus, you can avoid any stress or irritability which may be caused from flickering / buzzing lights.

If you can’t tell where everyone is at every second, you’ve got an issue. This is especially important for outdoors during the time when it is dark out. Sure, some light is better than none; but why jeopardize your operations with a flickering light when you could upgrade to LED and get rid of the issue entirely?

As you may or may not know, flickering lights make it harder to not only detect movement, but also identify humans. Think of a strobe light, it’s a bit harder to actually make out what is going on entirely. This holds true with a flickering light, even if it isn’t as bad as a strobe light is.

Here we are going to list a couple of the other major general benefits that LED technology offers over other technologies such as metal halide, HPS, fluorescent, and similar.

There are really only two routes you can take, LED retrofit lighting kit will work perfectly. On top of that, retrofitting is a much cheaper option (typically) then a full replacement is. So, if you don’t need to fully replace then stick with retrofit kit LEDs and you will save a lot on your lighting system investment.

Conclusion

Flaws can always be picked at, especially in such tedious and unpredictable environments like the one we are discussing in this topic.

If you're ready to take the plunge and purchase a state-of-the-art home theater system, you have more to consider than just the equipment you intend to purchase. Even if all of your components are top-of-the-line, you won't get the most bang for your buck without professional design and installation.

To make sure you get the home theater of your dreams, it's important to consult an electrician early on in the process. A quick electrical inspection of your desired theater space will help you understand what kinds of electrical upgrades you might need to set up a media center that is functional, safe and that provides the highest quality viewing experience.

Handle the Load

A big-screen TV by itself won't strain the electrical system in a modern home. But factor in a disc player, set top box, stereo receiver and multiple speakers, and you might be talking about a serious electrical load. A licensed electrician can easily test your system to ensure it's ready to power your dream theater. If upgrades are necessary, you can take confidence that new wiring or circuits will be installed by a qualified professional.

Hide the Cords

Wireless speakers and other multimedia components might seem like an attractive option because you want a streamlined look, but you'll often sacrifice a great deal of quality by cutting the cord. Instead, let an electrician make a plan for hiding all of your home theater's power cords away so that the room looks great and there's no risk of tripping in a darkened room. Without tearing up your decor, a professional installer can run cables within your walls and install new outlets to avoid that snarl of wires.

Protect Your Investment

You probably already use a surge protector to safeguard your home computer against the threat of power surges. But your home theater equipment is just as vulnerable, and a single lightning strike can turn thousands of dollars in equipment into trash. While you can protect your home entertainment technology using surge protection adapters, the best solution is to install a whole-home surge protection system. There's no need for clunky power strips, and your entire home's electronics and appliances will be safeguarded.

Unless you have extensive electrical experience, don't go it alone when setting up your home theater. Make sure your design is smart, safe and spectacular by enlisting the talents of a licensed local electrician.

Prefabs provide on-site, off-site and other hidden advantages. For instance, faster installation at the job site reduces the project duration. Prefabs have the potential of cutting the installation time by almost a half. In addition, the project will require fewer workers in the field resulting in a big reduction in labor costs and improved profitability.

There’s also a significant savings on labor, which can be very expensive and in short supply. The prefabrication process is considered more of a manufacturing function so the contractor is able to achieve success with fewer workers. The workshop can make use of semi-skilled workers and apprentices, unlike a construction site where an electrician is required to perform the installation.

Fewer materials and less activity at a job site mean that the project is completed faster with a reduced opportunity for accidents and delays. In addition, by delivering all the individual components to the workshop for assembly, the level of material handling is narrowed. This equates to an easy-to-manage supply chain. Fewer materials reduce clutter, waste disposal, and the need for extra storage space.

The workshop provides the best environment for producing the assembly fast without the interruptions that might be found at a construction job site. Further, the production of prefabs is not affected as much by delays from other trades, bad weather, and other construction project hold-ups.

Electricians spend less time working at dangerous heights and precarious positions, hence reducing safety risks. Prefabs allow contractors to reduce the need for as many licensed electricians on the job site. This can result in greater productivity and profitability.

Increased competition and high labor costs have caused declining profits for many electrical contractors. However, with the use of prefabs, profitability can be improved by reducing the labor and time spent at the construction site. Additionally, fabricating electrical assemblies in a workshop makes it easier to stay on budget and hit your project timelines.

This year marks our 15th anniversary, so we have been celebrating by taking trips down memory lane to 1999, the year of Pegasus Lighting’s birth. This month, of course, we are checking out what was going on in September 1999. Remember when Viacom merged with CBS, the Sega Dreamcast temporarily entranced the population, and lots of crazy stuff happened at the MTV Video Music Awards (In fact, the first five items on this list occurred during the VMAs)? Come check it out!

1. Lauren Hill Is the Queen of Hip Hop

Lil Kim had decided to wear a rather risque outfit to the VMAs, and Diana Ross decided to give the world her opinion of Kim’s outfit.

3. Mothers of Slain Rappers Unite

By presenting a host of male drag performers dressed as the singer in her past music videos, MTV paid tribute to the most nominated artist in VMA history, Madonna.

5. Beastie Boys Back with Vengeance

The first entry in the sixth genereation of video game consoles, slightly predating the Playstation 2, Xbox, and GameCube, was Sega’s Dreamcast. The last console Sega would ever release, its popularity was shortlived.

7. Viacom, Corporate Behemoth

U.S. Attorney General Janet Reno launches an independent investigation into the 1993 fire at the Branch Davidian church near Waco, Texas after watching a documentary film about it. Who says the movies don’t influence society?

9. John Elway’s Jersey Number Retired

NASA annouunced that it had lost contact with the Mars Climate Orbiter. Oops.

11. Ally McBeal Steals the Show

The Emmy Award for Outstanding Drama Series was given to The Practice. Also nominated were ER, Law & Order, NYPD Blue, and The Sopranos.

13. John Lithgow’s Still Got It!

The Emmy Award for Outstanding Lead Acress in a Comedy Series was given to Helen Hunt for her role on Mad About You.

15. The Sopranos