Nobody likes feeling hot and uncomfortable while they are trying to take respite from the heat in the comfort of their own home or when they are trying to focus on their work in an office building. While you may be tempted to crank up the air conditioner in an attempt to stay cool, you could literally end up spending hundreds of dollars by overworking your air conditioning unit. What can you do? Suffer in the heat or throw tons of cash at the electric bill?

Before you make any rash decisions, realize there is another option—a ceiling fan. A cost-saving measure to help keep you comfortable can be achieved with the help of an electrician. Burbank home and business owners can benefit from installing a fan to help circulate the air in a room and prevent that hot, stale feeling that tends to envelope you when the temperatures are soaring outside.

A ceiling fan is an energy efficient way to help keep the air circulating, which automatically makes you feel cooler. Using a fan to stir the air can help cut down on the need for the air conditioner. The slight breeze the fan produces is very soothing. You will want to discuss the various options and fan sizes with your electrician. Burbank residents can call The Electric Connection to help the pick the right fan for their needs and schedule an installation.

It isn’t just the hot summer months that benefit from a ceiling fan. In the winter, the fan can be turned to spin in the opposite direction to help circulate the warm air by pushing it down and pulling the cold air up. You can choose to install one fan in the main living areas, or install several fans throughout the home or office to keep the air steadily moving. The friendly team at Electric Connection is ready to serve you.

Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.

Is your utility company planning on installing a smart meter on your home? You're not alone. These meters have been implemented in a number of regions across the United States, as well as in other countries in North America, Europe and Oceania. Read on to find out more about why these smart devices are growing in popularity and what you need to know about them.

Three Advantages for You

Smart meters have several big advantages over your traditional electricity meter. For one thing, they send their data to the utility company automatically, so there's no need for a meter reader to come by once a month. That also means they can turn your service on and off remotely, so you don't have to sit around and wait all day to get the power switched on after you move into a new home.

To take advantage of the remote reading capability, smart meters calculate your usage frequently, between every fifteen minutes and one hour, so you get a much better idea of when you use the most electricity. Additionally, most smart meters let you access a granular breakdown of all the data they collect about your energy usage, so you can make informed decisions about how and when to use your appliances. If you notice a big spike during the daytime, for example, you can turn the air conditioner down a notch or two, or cut down on the number of televisions you have on. It's easy to save electricity if you break down your consumption device by device, and a smart meter gives you the ability to get started.

Real Time Feedback

The smart meter also helps your utility company respond quickly to any outages and fine-tune its production. Since the company gets feedback about your consumption within an hour, it will know automatically if your power goes out and can see what other houses are having problems. That way, the company can get a jump-start on addressing the outage and act quickly to alleviate any accompanying safety concerns, like a downed wire.

What's more, the meter tells the company exactly when people are using power, so it can adjust its supply accordingly. From there, utilities have the option of instituting time-of-day pricing, selling electricity at cheaper rates during nights and weekends. This allows utilities to balance out their production schedules and use fewer auxiliary plants during the day, which reduces fossil fuel consumption and helps keep prices lower overall.

Spreading Across the Country

As more people discover the benefits of smart meters, their adoption is poised to increase across the country. Next time your utility provider upgrades its equipment, chances are you will get a smart meter installed if you don't have one already. If you have further questions about smart meters, how they work and what information they collect, contact your local electrician today.