Aluminum wiring is common today and can be perfectly safe when installed and terminated correctly. The transmission lines passing overhead as you drive and those coming into your home are often aluminum, for example. But many older homes have aluminum wiring that was  through time has become unsafe which can create a potential fire hazard. Keep an eye out for any warning signs that may indicate that your home has aluminum wiring issues.

Indicators of Aluminum Wiring Issues

There are a number of electrical red flags that could indicate an aluminum wiring problem. Make sure you call an electrician if you see:

Aluminum Wiring Repair in Denver

While aluminum wiring may not always be a problem,  if you notice anything out of the ordinary, give us a call today. As always, we give free estimates and have a certified electrician standing by 24 hours a day.

Do you or does someone that you know have a Federal Pacific Electrical panel in their business or home? There are a number of reasons that these panels are unsafe, which means that they should be replaced as quickly as possible. One of the first reasons is simply because they are so old. Federal Pacific panels have not been installed in many years. The main reason that they should be replaced by your electrician in Los Angeles is because the circuit breakers in the panel may not always trip whenever they should. This can lead to some very serious issues with your home’s electrical system.

An Example

A couple years ago, one of our technicians were called out to inspect a circuit wire that appeared to have bubbled up. Whenever he arrived at the location, he discovered that this particular circuit had been overloaded so far that the sheath covering on the cable started to boil. Upon further inspection, he found out that the power for this particular cable came from a Federal Pacific electrical panel. What happened, was that the homeowner’s air conditioning unit was experiencing issues that caused it to seize up, continuously pulling more and more power from the panel. Rather than tripping like it should have, the circuit breaker remained on, leading to the boiling cable sheathe.

Although we were able to correct this problem relatively quickly, it could very easily have turned out much worse. This overloaded wire could have caught fire, or remained unnoticed and poorly insulated until it came into contact with a person or with another item that led to serious electrical shock or other injury.

The moral of the story is to have your home regularly inspected by a Los Angeles electrician for proper safety. For more safety tips or information about unsafe electrical panels, visit The Electric Connection at www.theelectricconnection.com.

LED Lighting Kit. This complete LED strip lighting kit is designed to permanently install on canopy tents, sun shelters, instant canopies, pop-up shelters, or E-Z UP Instant Shelters. A variety of colors are available—including “Bugs-Away” yellow—and the strip lights provide up to 360 lumens of illumination.

LED Tubes and LED Panels become the best solution for the office workplace environment. They are cost effective lighting solutions, provide good lighting quality, last longer and contain or emit no harmful compounds while leaving an ecological footprint in each building. This article is going to explain the difference between tube fixtures and panel fixtures. They are both different, but often times get mixed up when talked about. Let’s clarify any confusions you may have about the two fixtures…

LED Panels are installed in dropped paneled ceilings. perfect replacement for expensive shatterproof fluorescent lamps. MyLEDLightingGuide LED tubes do not contain glass and will not shatter if dropped. Fluorescent tubes contain mercury, some projects decide for LED versions because they want to remove mercury out of the building.

All LED tubes use drivers that power the LEDs. The ballast is converting the AC power from the utility company into LED’s DC power. Some manufacturers incorporate the drivers in the LED tubes. Some decide to use an external driver outside of the tube. There are some subtle differences between the two designs. Retrofitting to LED tubes with internal drivers involves removing the ballast and rewiring the line source. Retrofitting external driver tubes involves removing the ballast, the line source gets wired to the external LED driver that is connected to the tubes. More and more people ask for LED tubes that can be just installed as a plug and play version into existing fixtures without removing or rewiring the existing ballast. While the installation of these tubes is simple, they are compatible with most ballast, but not all ballasts. Contact the lighting experts at MyLEDLightingGuide.com to ensure the tubes will run properly.

Changing the light at work and in offices is easily done by LED tubes. They are readily set up and use considerably less power. LED tube light sources offer smooth, stable and clear lighting conditions.