One of the best things you can do to protect your home and keep your family safe is to add motion sensor installation to your Fairfax, VA property. Simply put, when someone is close enough to your home, their motion is detected and a light comes on. This bright light deters intruders, alerts neighbors and makes you aware of what’s taking place on the perimeter of your house.

Bright lights are an intruders worst nightmare. Thieves and home invaders thrive on the hidden cover of darkness. Motion sensors also protect your home when you’re away. You’ll feel more secure knowing anyone approaching your home will be seen by neighbors and passersby.

The most common places to install motion sensors are in close proximity to garage doors, porches or patios, backyards and front and back entry doors. A quality motion sensor also helps illuminate your walkways as you approach your home after dark.

Motion sensors can even help decrease your electricity bills. Because motion sensors only come on when movement is detected, they are less costly than porch and other exterior lights that must run continually. No more hunting around for light switches in the dark, either.

When you are using an electronic device and need to charge it, you look for the closest power point to plug it in. There are times when you just can”t find a plug point within easy reach; that’s when you look for an electrical extension cord and plug in the device you need to charge.

This is something most of us do as a matter of routine and we don’t give much thought to it. Extension cords are undoubtedly a very handy tool that solves some very basic charging problems. When there is a shortage of outlets or if an electronic device is just a little too far from the closest electrical point, these extension cords prove very useful.

However, it’s important to keep in view the fact that an extension cord isn’t meant to be a permanent electrical fixture; it’s to be used for a specific reason and it can be hazardous to use them incorrectly.

Here, we talk about the different hazards of electrical extension cords and how they can be avoided:

Wind power is electricity-generating technology that is very similar to hydroelectric power and burning fossil fuels. In all three cases, something is being used to spin a turbine, which then converts that energy into electricity. In the case of fossil fuels, the fuel is burned, which converts water to steam, which then spins the turbine. Hydroelectric power generators use the force of flowing or falling water to turn their turbines. Wind turbines are turned by the power of the wind, making them an ideal source of energy for places with high wind, such as the Great Plains. While the idea of wind power conjures up images of fields full of spinning turbines, it is not hard to find an electrician in Santa Monica who can help you to install one on your own land.

Wind Farms

The majority of all wind power is generated on huge wind farms. Each wind farm typically maintains and operates hundreds of wind turbines, which in turn connect to local electrical circuits that eventually funnel them into the main electricity pool. Your local utility company most often runs these energy operations as a secondary source of electricity. In fact, many companies give you the option to guarantee that some or all of the electricity that you use each month comes from their wind farm operations. In the event that you are unable to install your own wind turbine, this is a great way to contribute and further investment into wind power.

Residential Wind Turbines

As the call for more renewable electricity sources has grown more popular, so has the use of residential wind turbines. In conjunction with other small-scale energy sources such as geo-thermal and solar, wind turbines can be a great electrical upgrade to any home. One caveat is that you must have a small amount of land in order for it to be an ideal fit for you. Talk to a local electrician Santa Monica CA, The Electric Connection for example, to determine whether or not one will work for you.

Installing a Residential Wind Turbine

Although a wind turbine generates electricity for your home and community, its installation is not typically completed by a Santa Monica electrician alone. Because of the complexity of the installation, it is best to find a company that specializes in their application. In most cases, this company will complete the erection and initial setup of the turbine, and then turn it over to an electrician Santa Monica, such as The Electric Connection, to complete the tethering to your home and power grid. This ensures that both the turbine installation and the electrical work is done in the safest, most complete manner possible.

In addition to connecting your new turbine to your home, your electrician may also need to perform a panel upgrade, and small amount of home rewiring. While this is typically not extensive, it is slightly more involved than having electrical outlets replaced. For the best outcome, you should always have someone conduct his or her electrical estimates before the work is started so that you know what to expect.

In regards to small-scale renewable energy sources, wind and solar power are by far the most popular, approachable options. Although many see them as unsightly, most believe that the benefits outweigh the costs. After their initial installation, these electrical upgrades require very little maintenance, provide clean consistent energy and rely on a 100% renewable source. If you have any questions about whether or not you should look into wind power, or other alternative energy sources, don’t hesitate to call or visit our website at www.theelectricconnection.com.

Handing over the responsibility of planning the layout of your home to the builder can be a huge relief. However, by doing so, you are leaving the builder with a hazy idea about your requirements. And this matters a lot especially in the case of electrical and lighting layouts.

The electrical and lighting plans of your home are as important as all the other plans. So before commencing the construction, consider adding these 6 essential points in the layout.

Follow this simple rule for every room and space in and around your house. Start with the functionality of that room or space. Next decide on the configuration of furniture in that area. And then, draft the lighting and electrical layout accordingly. In this way, you will not over-light or under-light any portion of your home.

Also, you can either consult an expert or do an in-depth research about the current lighting trends in the market. No matter how much you love a certain lighting trend, if it’s outdated, there’s a good chance that it won’t complement the current design elements of your house.

Security, lighting, cooling, heating – there are multiple control panels which you may find essential for your home. So decide on the specific types and number of these panels early. Doing so will help you mark their exact and convenient locations, in the layout itself, and save you a lot of hassles later.

These are the kind of electrical elements which most of the people would want to keep out of their sight. But, that might not be a practical thing to do in some of the cases. For your bathrooms, you might want to hide the power points inside the cabinets. However, when you need to use your hair dryer, you will have to keep the door of the cabinet open. And if it is a face cabinet, you won’t be able to use the mirror. Small things like this make a huge difference to your routine activities. For art aficionados, imagine the dismay of seeing a power point right next to their prized possession of a famous work of art. Hence, it would be wise to decide and ink in the places for power points in the electrical layout itself.

Imagine opening your garage door and fumbling your way to the switch board to turn on the lights. And, the irritation your guests might face while trying to figure out the correct switch required. Exactly the reason, why you should think of automated lighting. And as for the switches, you can replace them with customized images of pantry, garage, laundry etc. This kind of detailing goes a long way in making your life more convenient and your home more comfortable for your family and guests.

Outdoor spaces of homes have today become an intrinsic part of their inhabitant’s social lives. If this holds true for you as well, you should definitely factor in illumination of areas such as decks, patios, pools etc., in the electrical and lighting layout. An ideal choice would be weather proof electrical outlets. Whether you want to accent foliage, light a pathway, overhead lighting and ground-level outlets for the swimming pool, it is essential that you chalk in all of your needs in the electrical and lighting plans.

Documenting the placements of electrical and lighting elements is a must. Be it written plans and drawings, or photographs. These records will save you a lot of trouble in future, when you need to do any type of renovation or even repairs.

All the above mentioned aspects will help you plan every small and big electrical and lighting aspect of your home effectively. So save yourself a lot of trouble and unnecessary expenses which might arise in future, if you don’t plan the electrical and lighting aspects of your home at the design stage itself.