Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save

With the right lights and accessories, LED landscape lighting is a breeze to install. Our plug-and-play different brand of lights in a G-LUX system. There are installation options and accessories for LED pond lights/fountain lights, spotlights, path lights, hardscape lights, well lights, and more. Check out the photos below for some landscape lighting ideas and layout options. With easy-to-use G-LUX accessories, such as extension cables, splitters, power supplies, dusk-to-dawn sensors, and waterproof junction boxes, any setup is possible.

Installation Accessories:

Waterproof Junction Box

You can use extension cables to lengthen the reach of or increase the number of lights in your LED landscape lighting system. Splitters are available in 3-way and 5-way options, and extension cables come in 6.56-foot, 16.4-foot, and 32.81-foot lengths. Use any combination of these plug-and-play accessories to add LED landscape lights where you need them. Make sure that the power supply you choose can handle the combined wattage of all your LED lights.

For this type of installation, you’ll need a G-LUX LED landscape light. Connect the female end of the pigtail power cable to your LED light, and connect the pigtail wires to the main line that runs to your other lights and existing power supply. You can also wire your G-LUX LED landscape light directly to your power supply.

You can create a G-LUX landscape lighting system using G-LUX LED lights and G-LUX dusk-to-dawn sensor will turn your landscape lights on at dusk and off at dawn. A sensor with an automatic timer is also available to keep landscape lights on for two, four, or six hours after dusk. The sensor must be plugged into your G-LUX power supply, and anything that you want it to control must be plugged into it. If you want the sensor to control multiple lights, plug your splitter or extension cable that is plugged into the splitter into it.

If you’re using waterproof G-LUX LED well lights or spotlights in ponds or fountains, there are a couple waterproof accessories that you might need. Use a G-LUX waterproof wire connector to do so.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.