There are always things you need to buy. Sometimes life likes to throw little emergencies your way and you will be short on funds. Wouldn’t it be nice to find ways to save money on your monthly bills so you were prepared for those little emergencies? You may have noticed your electric bill going up. This is something you can expect to continue happening for the months and years to come. That electric bill is going to cut into your budget and make things a little tighter. Your Glendale electrician has some tips to help you lower your electric bill and keep a little extra money in your pocket. The team at The Electric Connection is here to help.

Replacing Light Bulbs

If you haven’t done it yet, you need to get rid of those old bulbs that are sucking electricity and running up your bill. Replace those bulbs with CFLs or have an electrician in Glendale install LED fixtures. CFLs use about 75 percent less electricity than incandescent and LEDs use about 90 percent less.

Use Less Hot Water

Shave a few minutes off of your daily shower. When washing your hands, rinse and shut off the water while you are lathering up and scrubbing. Turn on the water and then shut off again. Only wash full loads of dishes and consider turning the setting on your clothes washer to warm or cold water.

Unplug Appliances

It may not seem like a big deal, but every single thing that you have plugged in is drawing electricity explains an electrician. Glendale residents can save a few dollars every day by unplugging cell phone chargers, laptop chargers and even gaming systems that they don’t use regularly. Anything that is plugged in is drawing a small current. It is something known as phantom electricity.

These three things are easy and will not change your lifestyle in anyway, but they will save you money. If you have questions about energy savings or want to install energy-efficient light fixtures, give The Electric Connection a call today.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.

Nineteen flash patterns greatly increase visibility. Patterns can be synchronized between light heads and easily controlled with one of Super Bright LEDs’

A weatherproof housing and sealed polycarbonate lens are built to withstand impact with road debris and exposure to wet conditions. Installation hardware is included along with foam anti-scratch pads for vehicle surface mounting. The durable LED lights operate within a wide 12-24V DC range for compatibility with any vehicle.

If you have recently moved into a home and have plans to put your personal touch on it, you are probably considering some renovations. Other reasons to renovate include accommodating a growing family or transforming the family home into one that is more of a retirement home. Maybe your home is old and you want to upgrade it to feel a little better or you are preparing to sell. No matter what your reasons for renovating may be, you will need an electrician in Glendale to help you make it possible. The team at The Electric Connection can assist you in making those renovation dreams a reality.

There are many different ways to renovate a home. Some are a little more labor intensive than others. A renovation may be something as simple as transforming a bedroom into an office. This would only require a Glendale electrician to do some minor changes to the wiring, including bringing in data lines and more outlets for equipment. Maybe you are making an office space into a bedroom and want to change out the fixtures to be a little more suitable for a bedroom. This is a quick fix that can be achieved in a single day when you rely on a certified electrician.

If you are going big and adding a new room or knocking out walls to make a space bigger, you will definitely need the services of an electrician. Glendale homeowners should always leave wiring issues to the professionals. An electrician can ensure the wiring is removed safely and new wiring is installed to compensate if needed. Kitchen upgrades are also going to run into some wiring issues, especially if you are adding more appliances or moving existing appliances. Give The Electric Connection a call today and set up your appointment to talk about your renovation plans.