It’s never a good idea to use electricity around water; bathroom spaces always have a certain amount of humidity and steam as well as water in them. You may end up using electrical devices such as hair dryers and shavers when you are in this bathroom and the shower and bathtub areas always have some water. These can prove to be an electrocution hazard or a fire hazard and it’s important to be extra careful when you are using any electrical appliances in the bathroom.

We all need water to maintain health and hygiene. However, it’s also an excellent conductor of electricity. This means you can easily experience shock when you are standing in a water puddle and touch an electrical appliance. If your skin in wet, that gives the electricity an easier path and it can pass through your body in an unhindered manner.

That can be extremely dangerous as electrical shock can cause heart arrhythmia, burns and can damage your nervous system and lead to death too. If the grounding is improper or if the wiring is poorly installed, that can start a fire as well. And so, it is crucial to maintain electrical safety when you are in bathroom spaces.

Here are some useful tips to you can follow to avoid an emergency:

We handle all types of commercial as well as residential electrical installation, repair and upgrade jobs. For any more information about our services and quotes, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

If you’ve never visited the DIY, home renovation blog Young House Love, you’re in for a treat. John and Sherry, bloggers extraordinaire, are renovating their home step-by-step, giving their readers a detailed look into the process. Every day they have some new clever project to write about. (And the way they tell stories gets addictive, quick).

The blog has a ton of posts on home lighting, some technical, some crazy and fun. Today, I thought I’d share with you my 3 favorite DIY lighting projects from Young House Love:

Explosion proof fixtures are a necessity for environments which output potentially explosive or flammable fumes, produce dust of dirt in the air, or similar situations in which a gas could enter the fixture and cause damage to the light or well-being of the facility.

If you are currently running or working with a facility which requires these explosion proof light fixtures, the list of 3 must-haves below will clear the air and hopefully set you on the right track to ensuring you have the proper setup and design.

First on the list, we are going to talk about the actual technology within the fixture and why it is so important.

While a big part of vapor proof lights is the actual fixture and its design, we think the luminaire within the fixture is equally as important.

We simply can’t recommend any other technology other than LED because we truly believe in it. To give you a little bit of insight on industrial LEDs, here are some of the reasons why companies of all sorts are converting to LED:

As you can see, just from these three main benefits that all sorts of facilities are realizing can really be game changing in terms of savings.

For these reasons (and more), we thought it was a must to have it first on the list.

Interested in learning more? Find Class 1 Div 2. For this reason, we suggest you always inquire with a reputable and knowledgeable company that offers and deals with explosion proof lighting when inquiring about your lighting project.

If you can’t find a reputable company to ask your questions, just LED explosion proofs offer the long-term solution is clear.

Especially when you consider in rebates, your initial upfront investment can be reduced greatly. While these rebates do vary from place to place, they are most often available when you buy DLC qualified fixtures. Not only are DLC qualified fixtures going to make you more eligible for rebates through your utility company, but they also provide other benefits. The biggest benefit of buying DLC qualified lights is they have ben tried and tested and, in most cases, do what they claim. In a busy world of lighting, not all products do exactly what they say. This is most common when a light is not qualified by something like the DLC.

Our main advice is this; to get the best value buy only DLC qualified fixtures. If you don’t, you may actually end up spending more upfront (by not getting any rebates) as well as more energy usage overtime, due to a less efficient build.

Another major cost saver can come through retrofitting. The only time you can retrofit is if your fixture is still functional and can fit a LED retrofit in it. If you do not match these requirements, then a full replacement will (typically) be required.

If you can, we suggest you retrofit. It saves money in two ways: retrofit kits are cheaper than full fixture replacements and the cost to retrofit is typically less time consuming and thus, less expensive.

In Summary

We know that a sensitive environment can be stressful to deal with, especially when it comes to the lighting system and the safety of the facility.

The above 3 must-haves are just the beginning, and each situation can vary greatly. As always, we suggest you consult with some lighting professionals to truly discover what you may require for your facility and operations.

The proud owner of a generator, whether for general use or use in an emergency, can rest assured that they have access to the power they need. But what if your generator isn’t quite up to the task? This can leave you with no means to perform normal functions at best, and at worst could leave you powerless in the face of a storm or other catastrophe. The certified experts at Kolb Electric have a strong history of handling generators, and today we bring you one of the most common complaints among generator-owners: power surges.

When it comes to communicating signs of disrepair, generators are actually rather talkative. It’s all in understanding the signs, the most common of which coming in the form of surging.

Surging refers to a generator (or other electrical component, machine or device) displaying clear fluctuations in behavior at intervals. These intervals can follow a clear pattern, or can be completely random. What exactly does this mean? Let’s use some examples.

A surging generator often will leave lights burning much brighter, then much dimmer rapidly, causing a sort of flicker back and forth. In machinery, this can also come as drastic changes in pace as well; such as a fan running faster and then slower for no obvious reason.

There are actually numerous causes for generator surging, including:

Bottom line; if your generator is experiencing surging there is definitely something wrong. The causes are myriad, but the solution stays the same. Seek professional assistance for your generator repair to ensure it’s ready and available when you need it most!

At Kolb Electric, we’ve been handling generator installation, repair and replacement for years, and we always bring our very best to any project. if you’re experiencing generator surges, don’t hesitate to contact us right away!