The list of issues concerning the supply of electricity in Texas is long.  First, the state has its own power grid, so it is essentially isolated from the rest of the nation.  It can’t get power from the outside during peak demand periods.  Plus, new rules from the EPA went into effect January 1 to reduce greenhouse gas emissions, forcing the immediate shutdown of two power plants in the state.   On top of that, since all power plants need a supply of cooling water to operate, the state’s drought and low water tables may force up to 3000 megawatts of power-generating equipment to shut down as early as May.  According to Plano, TX electricians, one plant was forced to shut down in 2011 for lack of water.  Add to this an increasing population and projected record summer temperatures, and the likelihood of blackouts will be at an all-time high.

Fortunately, for customers of Texas power utilities, it is possible to avoid the headaches and potential damage to electrically-operated appliances in a blackout with some foresight and wise investing.  By using a savvy electrician, Plano TX residents can take advantage of the latest technology in back-up power systems to service their houses during power outages.  Homeowners can continue to enjoy all the creature comforts they expect, even if their neighbors are in total darkness.

The latest advancement in backup power supplies is the Indoor Generator, which uses a bank of batteries to provide emergency power to the home.  Unlike traditional engine-driven units, these indoor generators are quiet, require no messy fuel handling, have no smell, and produce a more efficient supply of power for home appliances.  Even better, customers don’t have to use power from the power company to charge the batteries.  Renewable energy sources, like solar and wind power, can be used to charge the batteries by installing solar panels or a wind turbine along with the unit.

A reliable, reputable Plano, TX electrician can set up customers with a system like this quickly thanks to innovations such as the Power Cart, a mobile trailer which combines a battery-based indoor generator with four solar panels and an optional wind turbine.  The indoor generator takes advantage of the sun and wind when available to power the batteries, relying only on the power company or second backup generator if the batteries deplete.  The system can provide a continuous 3.6 kilowatt output, and has on-board electronics to tell the Power Cart to sell power back to the power company using wind or solar power when possible.

For large projects, a simple notepad and pen are not sufficient to provide accurate and timely cost estimates to clients. The good news is that there are some pretty good estimating software programs now available that do the job. Both residential and commercial contractors can save time, money, and win more bids by providing professional job estimates. These programs also offer the ability to manage projects, bill clients, and keep track of change orders. They feature a wide range of options for any size of contractor.

TurboBid is one of the most well received and fully featured estimating programs on the market. It contains a user-friendly graphical interface and offers training courses through their website. The software can connect to national and local material supplier databases to keep pricing updated throughout the bidding process.

Change orders and revisions are simple. The software will generate automatic reports and professional presentations for clients. It also allows fine adjustment of man-hour estimations in different locations of the building. This includes ceilings. The program can account for different worker skill levels and upcoming wage increases for longer projects.

The built-in database includes tens of thousands of parts and full assemblies to allow for quick and easy estimation. The program incorporates national and local electrical code requirements to ensure bids are code compliant. In addition, it has a value engineering feature that suggests code-compliant changes to the customer’s blueprints. This can ultimately save money by adding, removing, or relocating devices.

If you are at familiar with the design and operation of a radiant heating system, then you actually have a basic idea of how snow melting systems and de-icing cables work. De-icing cables, which heat up via electric resistance heating, may be installed beneath walkways, driveways, and other paved areas, and the heat that they emanate will help in keeping those surfaces free of ice. This is, obviously, a great advantage in keeping your property safe for pedestrian traffic throughout the winter season, as well as for ensuring good traction when leaving by vehicle. De-icing cables can also be installed in rain gutters, which makes a huge difference in keeping them free of ice. When the sun beats down on your roof, snow and ice can melt. It can then refreeze in your gutters, potentially causing damage via ice dams.

Snow melting systems can also utilize hydronic systems, in which a boiler heats water, and that water is distributed throughout a system of tubing. The end result is the same. The heat radiates through the surface above the tubing, and the snow is cleared away. To learn more about such systems, or to have them installed by trained technicians, give the professional electricians on our staff a call.

The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.