Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

Are you looking for a Des Moines electrician for your next project?  We service all of Des Moines and surrounding communities.  We offer upfront pricing so you know what the job will cost before the work begins.  Have an electrical emergency?  We have electricians on call to handle your electrical emergencies and accept credit cards for those unexpected repairs.

Our electricians are highly trained seasoned professionals.  They can give you a price on the jobsite and in most cases perform the work at the same time if you choose.

Custom Electrical Services performs thousands of jobs in and around the Des Moines area.  They can handle any electrical job from the simple to the most lavish.  Some common request are code updates, new panels, add recessed or can lighting, LED upgrades, under cabinet lighting, smoke alarm replacements and or installations, whole home surge protection, hot tub wiring, pool wiring, landscape lighting and more!  Note that all of there great services are not listed as they can perform almost any electrical task.

Want to schedule your next electrical service call?  Schedule online at schedule electrical service call 24 hours a day 7 days a week.  Need an electrician after hours?  They  have electricians on call 24/7 and your call is answered by a live person no matter the time of day or night at 515-669-3418.

Custom Electrical Services has local trusted electricians.  They have an A+ rating with the Better Business Bureau.

Schedule an estimate online today!

When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Each process of construction is directly or indirectly related to the other, so having a bit of knowledge about each one of these is imperative even if you specialize in only one.

From a contractor’s perspective, the construction of a house can be divided into two main phases: wet and dry. The wet phase refers to the initial phase when the house is unprotected from moisture caused by external forces such as rain, while the dry phase is the phase when most electrical work is carried out as the interior is safe from rain and snow.

On the other hand, from an electrician’s perspective, the two main phases of construction include phase one – the rough in, and phase two – the finish. This division is based on the stage of finishing that the walls are at. Here is a step-by-step guide into how the electrical work is carried out during the construction of a house:

Since there is a lot of machinery that operates on electricity and there is no electricity connection at the construction site, a temporary electric pole is installed during this stage.