These LED lights attach easily to the front and rear of your bike. The white light clips to the front break cables to help you see where you’re going, and signal to others that you’re heading their way. The red light clips to your seat rails, brightly marking your bike’s rear. They both operate in steady beam and continuous flash modes, visible from up to a mile away. They’re weather resistant and have a long battery life.

2. Twist On Bike Lights

We all like using lights that we have collected over the years, but along with this also comes a great deal of responsibility. Please check any Christmas lights or decorations, such as wreaths, that light up for before they are used. The plastic or glass that surrounds the light should be intact, and should not contain any cracks or breaks. Please inspect the wires for tears fraying or damage.

If lights are being plugged in outside on the trees, roof top, doors, or driveway make sure you have enough electrical outlets. Do not overload your outlets and use only ground fault outlets as this will help to keep your lights and yourself safe, as they will most likely be exposed to wetness and moisture. Also make sure your extension cords do not become a tripping hazard.

When choosing a real tree, make sure it’s not too dry and not close to any candles. Christmas lights can be used to decorate real and synthetic Christmas trees. Lights should be in their best condition before being placed on the tree. Turn all Christmas lights and decorations off when you leave the house or go to bed to avoid electrical fire. Don’t use electrically powered ornaments or lights on metal decorative trees or decorations as the sharp edges may cut the cord and cause a shock and fire hazard. Due to heat danger keep your tree 3-4 feet away from fireplaces, electric heaters and floor registers.

4. Christmas “bubble” lights were popular in the 1950’s and contain coloured liquid. These should be kept away from children, as the covering of the lights can be broken, and children may attempt to drink the liquid inside. Strings of lights should be kept tucked away or taped to walls so that children cannot easily pull the cords and injure themselves or damage furniture.

5. LED’s are much more energy efficient and give off almost no heat. LED lights help protect from overloading outlets they are much safer and you can use more of them with the same available power source so your home will look like a Christmas wonderland!

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

Depending on the size of your warehouse, as a manager (or owner) of that facility; you probably know that your building consumes a considerable amount of energy.

From your lighting system to your heating and cooling, to make such large buildings meet “workable” conditions can be tough and expensive. Although, this post is here to gather 5 critical ways on how you can meet green initiatives for your companies warehouse operations, all while maintaining those workable conditions your employees require.

By implementing the following ways, you will be able to realize a great reduction in not only energy waste, but also overhead costs associated with powering that wasted energy month to month. So there are two major benefits from all of this; one being you will create a more sustainable warehouse all while secondly reducing month to month expenses associated with operating your warehouse.

Without further ado, here is the first of many on this list of ways to save energy in your warehouse facility…

Imagine how great it would be to have the same amount of light that is outside, inside. Best part? It won’t be coming from artificial lights which cost money to run, but rather a natural light source that costs nothing other than installing skylights for that light to come in. This will easily and greatly reduce the amount of time that you need any type of light on in your warehouse.

Allow sun to illuminate your facility by installing skylights throughout your building!

These days HVAC is nearly installed in every building, including warehouses. Multiple things could be messing up your efficiency when it comes to heating, ventilating, and cooling your warehouse, and they all go back to that HVAC system.

For starters, ensuring that your professional building commissioning company to run a full audit of your warehouse, and they will tell you exactly what you need to work on for your building to be running exactly how it was built to run.

Conclusion

The process of addressing (let alone fixing) these issues and areas of concern may seem overwhelming, but keeping the end goal in mind will make the efforts to make these changes in your warehouse much easier. Taking it one at a time will make all the difference, but ensuring you are working on them overtime will be all that is needed. Just remember, all of these critical ways to reduce energy are going to not only make your company more sustainable, but it will also save you tons in overhead.

Have any other ways to save energy specifically in warehouses? Comment them down below to help out other warehouse managers / owners alike!