Electric wires and cables are the lifeline of most if not all industrial applications. If your cables fail, your entire system comes to a halt leaving you with costly downtime and loss of profit.

As a busy manager or department head in any industrial plant, you always have a lot to worry about every day. Implementing and following some basic guidelines will extend the lifespan of your cables, reduce downtime, decrease safety and non-conformance issues and increase the overall efficiency of the plant.

Here are some common practices for proper wire and cable care:

1. Choose an Effective Approach

Study the various electrical wires and cables in their respective departments.

If you are looking for a place to escape from life’s every day hustle and bustle,Look for IP (Ingress Protection) rated fixtures that are waterproof, meaning dust-tight and protected against long immersion in water, rather than simply “water safe” or “wet location safe” options.  Waterproof fixtures are meant to be submerged and will prevent water from entering them due to sealed assembly.  Take the precaution to ensure that your fixtures will meet all safety and application standards for an underwater environment prior to purchase or installation.

Ingress Protection (IP) ratings specify the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

An “X” can used for one of the digits if there is only one class of protection, i.e. IPX1 which addresses protection against vertically falling drops of water e.g. condensation.

IP First number – Protection against Solid Objects

IP Second number – Protection against Liquids

Voltage Requirements

When weighing your options on which type of fixture to choose, cost, convenience, and the size of your project are important. If one were to complete a large project for the grounds of a grand hotel, for example, line voltage (120V) would be the ideal option as vast distances may exist between the focal point and the fixture itself.

While it’s also true that standard incandescent bulbs can be found at virtually any hardware or household goods store, in an age where environmental awareness is important to daily life, technology and the public are moving in tandem towards different solutions. Since line voltage lighting consumes much more energy and will typically require the expertise of a licensed electrician, more homeowners are choosing low voltage (12V) options. Low voltage fixtures are notably the safer and less hazardous of the two choices, are often smaller, and easier to conceal within a natural landscape. They also have the added benefit of lower cost over time. Note that a transformer is required to convert to the lower voltage for fixtures which will be used underwater. You may also make use of photocells and timers to save on electricity consumption costs even further.

Let’s take a look at some examples of the different types of submersible low voltage products available today:

Low Voltage Halogen

This LED lights consume approximately 75% less power than incandescent units for the same amount of light output. This amounts to a sizeable savings over their life span. Moreover, standard underwater LED fixtures consume about 1/5 of the power as standard incandescent bulbs!

Besides energy savings, the nature of LED production makes them ideal for underwater applications. There are no bulbs to change as LED fixtures typically come in a permanently sealed housing. Sealed construction means underwater lights may be left in a permanent location with no concerns about extra cable allowances, or making provisions to change bulbs. They should, however, be accessible in order to clean the lenses during regular pond maintenance.

The world of lighting, LED specifically, can get overwhelming for those that are not directly in the space. From lumens, to watts, efficacy, and more; jargon and terms aren’t doing you any good if you don’t know what they mean.

Not only is it just about LED terms, but also general concepts, facts, and methods of LED lighting technology and the fundamentals that are important to understand to use LED to it’s fullest potential.

In this post, we’ve gather the 7+ “must read” LED lighting articles you should read if you want to understand LED lighting a bit more and be much better off when you dive into the industry and technology. Whether you are a facility manager, electrical contractor, or building owner; all of these articles we’ve gathered will certainly give some value and we hope you enjoy them all

A Tiffany lamp is a style of fixture commonly associated with the Art Nouveau movement. The term is sometimes used broadly to refer to stained glass but it gets its name from the original creator and design director, Louis Comfort Tiffany – the son of Tiffany & Co. founder, Charles Lewis Tiffany.

The first Tiffany lamp was produced around 1895. In line with Tiffany’s vision that nature should inspire design, each piece featured elements of nature or geometric shapes to create intricate patterns. Each lamp was handmade by Louis himself or by an artist in his studio.

The bases of the lamps were typically sculpted from bronze with shades created from hundreds of cut glass shapes fashioned together with copper foil. These works of art took many hours of skilled craftsmanship to complete and remain popular to this day, thanks to their complex beauty.

By Clarissa Allison | April 29th, 2016

If you want to update your home to create an appeal of freshness and light, there’s no better color to use in your decorating scheme than white. Whether pure white, off white or cream – despite what you may initially think, white can add drama to your home. Read on for tips and product suggestions that will transform your abode into your own personal white palace.

The key with using white in your space is to soften your chosen items by making sure that everything isn’t overly match-y and austere. Choose distressed finishes for your furniture and items that exhibit a bit of texture and softness. In this way you will avoid severity and “coldness” while adding familiarity and comfort to your space. George Nelson  at the end of the Second World War.

reflective glare. The sculptural qualities of this lamp are truly amazing.