There are many reasons and advantages of LED street lights over HPS, Metal Halide, and any other HID light used in the street lighting industry. These advantages of LED street range from cost savings, higher quality of light, and overall better efficiency.

LED is quickly becoming the “go to” light for all uses; residential, commercial, and industrial. From fully replacing and retrofitting LED is seriously becoming the majority within the world of lighting. The following list is going to cover 4 major advantages of LED street lights over HPS and Metal Halide, hopefully it shines some light on the true benefits of LED for even Metal Halide, you get results that show LEDs actually really do pay for themselves. If you use your lights often, making the switch to LED street lights may even pay themselves off within a few years.

If you’d like to see how much you could save, check out the diminishes over time. This is a highly important thing to note because with greater lumen depreciation comes added costs of maintenance.

Lighting fixtures such as HPS and Metal Halide have lumen depreciation that happens much earlier in their life and much quicker throughout the bulbs life. Whereas an LED takes a longer time to start depleting in it’s lumen output and much slower lumen depreciation than HPS and Metal Halide does.

While not all LED suppliers and manufacturers, MyLEDLightinGuide.com offers LED fixtures and retrofit kits that can produce at a very high MyLEDLightingGuide retrofit kits can run as high as 151 lumens per watt. While the typical retrofit kits on the marketplace (on average) run at only around 110 lumens per watt.

This is just a prime example of how powerful lumens per watt can be. The more lumens per watt you get, the less watts you will need to produce the same amount of light.

So, let’s compare the “average” retrofit kits compared to a Metal Halide light. Remember, the “average” retrofit kits run at around 110 lumens per watt. Compare that to a Metal Halide light that runs around (on average) 90 lumens per watt.

So just by these numbers we can start to see the power LED lights have and how they need less watts to produce the same amount of light that a HPS or Metal Halide light does.

In addition to #3 on this list, LEDs also provide a higher quality of light measure by the Color Rendering Index (CRI). Here’s two images that should do the talking:

Street Light Conversion From 400W Metal Halide to 120W LED using a LED Retrofit Kit (before)

As you can see after the 400W Metal Halide was replaced by the 120W LED fixture, the light produced is much brighter and illuminates a greater area. On top of that, it is using way less energy (400W down to 120W)!

Brighter and greater illumination can greatly increase safety and reduce crime by the simple fact of being able to see more throughout the night. Better illumination also creates safer roadways by not leaving any dark spots that may cause issues for drivers during night time driving.

Homeowners in Allen and other parts of North Texas know what time of year this is—and they keep the phone number for their top Allen electrician handy. Why? Springtime in North Texas is well-known for its potentially severe weather. Severe storms, along with extreme temperatures and lightning are just a few of the conditions responsible for rolling blackouts, power surges and power outages. Our weakened power grid and a growing population does nothing to alleviate the situation, which is why many turn to their top Allen electrician for tips on how to deal with the storm season.

Storm Season Tips

With the weather in North Texas being so unpredictable, how can you be sure that you are prepared to tackle what Mother Nature dishes out? Follow these simple tips to protect your home, your electrical system and your family from dangerous and frightening conditions.

#1 Have your electrical system checked regularly. With this storm season upon us, it is extremely important that you get in touch with your Allen electrician and have him look over your circuit breakers, wiring and outlets as part of his regular maintenance. Flaws in your electrical system, be it with breakers, wiring or any other aspect, combined with unpredictable weather, is the recipe for a very, very bad situation.

#2 Use power surge protectors on all your appliances. Did you know that, even a lightning strike that hits miles from your home can affect your appliances? Power surge protectors show up often in storm season tips everywhere, and there’s a reason why. Power surges can be deadly for your appliances and anything else hooked up directly into the outlet, particularly during lightning storms.

#3 Install a built-in surge protector on your circuit panel. This will protect everything hooked to the circuit panel from potentially damaging surges. Even when the power is restored after an outage, it often still does not come on right away; instead, it flickers, which shoots and cuts off electricity randomly to your appliances, ultimately causing damage.

#4 Always keep a weather radio handy. Weather alert radios are an invaluable addition to your home’s severe weather kit. In case of an emergency, an outage, lightning strike or blackout, you will have access to weather updates, evacuation information (if necessary), and instructions on how to keep your family and home safe in the event of bad weather.

#5 Invest in an indoor generator. Indoor generators are a great way to take a little pressure off of the overloaded power grid during a power surge or blackout. When there’s a blackout, the indoor generator kicks in, keeping a steady flow of electricity going to your home and keeping your appliances from getting damaged. Some generators are solar-powered, which can save you energy, time and money.

ElectricMan: Helping You Prepare

Severe stormy weather doesn’t have to be scary, inconvenient, dangerous or costly. Following these simple storm season tips can ensure that you and your family are spared the expenses and headaches that come with unpredictable weather in North Texas. For 27 years, ElectricMan has dealt with all sorts of electrical issues resulting from severe weather. Call us today at 972-301-2630 to learn more about how we can help you prepare for a stormy season. For more helpful tips on keeping your home’s electrical system running well, keep checking in with us at blog.electricmaninc.com or check out our website at www.electricmaninc.com today!

Programmable logic controllers provide automatic control of processes so that very little human intervention is required. Yet, this results in a well-coordinated, repetitive process.

These systems automatically start and shut down critical equipment in large and complex manufacturing processes. When in operation, programmable logic controllers ensure that all conditions are met before starting up a certain machine or process. In addition, the PLC continues monitoring the entire system using a variety of sensors.

Consequently, this ensures that everything runs as programmed. The PLC will trip if it detects a malfunction or abnormality in any of the monitored parameters.

The operating environment, size of the processes, ease of access by operators and maintenance personnel influence the choice of PLC.

A harsh environment with dust or small particles will require a PLC system with an appropriately IP rated enclosure. This prevents ingress of foreign particles into the system. The available space and layout also influence the choice. Therefore, most users require easy access for reprogramming, maintenance, or troubleshooting.

The simplest form of a PLC, all the basic components of a PLC include the I/O points, CPU, and software program. It is typically housed in a single enclosure. These PLCs are attached directly to the equipment being controlled.

Modular PLCs consists of several components on a common bus within a base unit to allow extending of the input and output. These units work on an expandable base unit. Therefore, it provides all the basic components of a PLC, i.e., a power supply, I/O points, memory and the CPU, and slots for additional cards.  These modules, which may be from the same or different manufacturers, are plugged together into a base unit.

This follows the same modular concept, but each of the modules plugs into a rack. The add-on modules are contained in racks which are then linked together through a network of connections. Since the rack mounting PLC is highly scalable, it allows very large systems to be assembled.

In energy management, the PLC monitors and controls equipment such as boiler systems. It helps the organization increase energy efficiency and safety. PLCs are also used in numerous everyday activities. They are found in factories, homes, commercial buildings, airports, unmanned car parks, and more.

Finally, some practical applications include:

We use electricity everyday of our lives; powering our televisions, lights, and appliances. While these may seem easy enough to turn on with one click of a button, the steps that go into powering these things can be complex. Here is a look at the systems that go into powering your home.

All electricity originates from the electrical utility company, BC Hydro in most cases. The electricity is transferred through power lines or underground lines to your home where it will go through the following series of connections:

Problems can occur at any point in this process. The inner workings of all these systems are complex and dangerous if tampered with. Expert Electric understands all the complexities and inner workings of your home electrical system. We can assist at any point to diagnose and fix any problems you may be experiencing.

Oil and natural gas resources are highly in-demand for the fuel and energy sectors, and this demand will continue to grow. Companies working in these sectors are often hard-pressed to put effective electrical systems in place that can handle the energy requirements without compromising on safety and reliability.

The good news is that modern electrical solutions are designed to handle the pressures and demands of processes in every aspect of the oil and gas industry. Today’s electrical infrastructure combines safe and reliable power supply with state-of-the-art information management systems customized to suit various requirements.

Let’s take a look at some of the electrical equipment available for oil and gas industry applications:

These can easily be considered some of the most essential products for the oil and gas sector, since they offer improved safety and security for employees as well as production units. Efficient warning systems can reduce the risk of casualties and save lives in case of untoward incidents.