The licensed electricians at Expert Electric receive a lot of questions about how motion sensing lights work and where to install them. Since our team has plenty of experience installing motion sensing lights in residential homes and commercial buildings, we figured it would be beneficial to help answer some of the more popular questions we receive. Keep reading to learn more about how motion sensing lights work, where to install them and how to install them.

Many of us are familiar with motion sensing lights as they have been around for some time now. They frequently make appearances in spy films and may even have been installed at your workplace. Nowadays, motion sensing lights are becoming an increasingly popular security measure in both commercial business buildings and residential homes. These motion sensing lights work by detecting infrared heat waves that can be found on moving objects. In order to ensure that the sensors are not triggered by non-human objects, it is necessary to dial them to a specific sensitivity setting that usually falls between 8 to 12 micrometers. To ensure that sensing lights are installed and working properly, it is best to contact a licensed electrician.

For residential homes, it is important to install motion sensing lights in different areas around the outside of the home, in both the front and back yard. For the front yard, consider installing the motion sensing lights to cover walkways, driveways, entranceways and stairs. For the backyard, it is important to cover any similar areas as well as patios, hot tubs, swimming pools and gates. Don’t feel that you should limit yourself to these areas. The placement of motion sensing lights is based upon each individual home. A good rule of thumb is to cover the most common pathways to home entrances as well as dark and hazardous areas throughout the property. The same goes for commercial properties although these properties will likely require a larger scale of motion sensing lights due to their size and valuables on hand. For questions about where to install motion sensing lights on either residential properties or commercial properties, contact the expert electricians at Expert Electric.

For commercial buildings and businesses, it is recommended that a licensed electrician takes care of the installation of motion sensing lights. This will ensure that the lights are working properly to protect the building and its valuables. Nowadays installing motion sensing lights in residential homes can be a simple process; however, dialing in the sensitivity settings so that the lights are not being prompted by non-human movement every hour of the night can be tricky. A licensed electrician at Expert Electric can have your residential motion sensing lights up and running in no time, allowing you to sleep safely and peacefully, free of frustrating false alarms.

Gas prices are fabulous—right now. We all know it is only a matter of time before the gas prices creep back up and we will once again be forced to pull from other areas of our monthly budget to afford to drive our vehicles. Many people have already made the switch to electric cars in an attempt to save money on their gas bills while reducing the strain on natural resources. There are plenty of different models of electric cars available that are sure to suit your needs. When you make an electric car purchase, you will likely also buy a charging station for you car. An electrician in Pasadena has some vital information for you. The team at The Electric Connection can also help answer questions about the electrical requirements of your electric car charging station.

When you buy your car, you will have the choice to buy a Level I or a Level II charging station. A Level I station is essentially a trickle charger. It sends a small charge to your car and can take upwards of 24 hours to fully charge the car. This charging station can be plugged into a standard outlet. However, it will need to be the only item plugged into that outlet and should be on its own breaker. If you need additional outlets or breakers, your electrician can take care of that for you.

A Level II charger is a fast charging system that typically fully charges a car in about 8 hours. This charging station requires a 240-volt outlet, which is not standard in your garage. It is a special outlet that will require installation by an electrician experienced with Pasadena electrical requirements. An inspection of your breaker panel will need to be conducted to make sure you have room for an additional breaker dedicated to your fast charging station. These are all things your electrician will evaluate on the first call. Give The Electric Connection a call today and schedule your consultation.

As with any type of home repair service, the cost of a project or repair will vary depending on what type of work you need to have done. If you have an electrical repair, for example, the electrician will need to take out his tools and do some electrical troubleshooting in order to determine exactly what and where the problem is. If this is the case, it’s not possible to give an exact electrical estimate before starting, and the job will need to be done on a time an material basis. The electrician should give you an accurate quote of their hourly rates, and the cost of materials that they charge you for should be realistic. If the electrician is knowledgeable and competent and the repair is straight forward, they can usually fix the issue within a fairly short amount of time and at a reasonable cost.

If you need a panel upgrade, new lighting, smoke detectors or any other type of electrical installation, you’ll want to make sure that you know the exact price before the job is started. For your own protection, this is very important.

Electric Connection, a licensed Pasadena electrician, can give you a ballpark price over the phone for most types of electrical installations, and then schedule an appointment to go out to your house or business property to give you a detailed price in writing. Getting a price in writing for the work you need done means no surprises for you at the end of the job and less stress for you while the job is in progress, too.

If you need an electrical update or installation, you can call our office and let us know exactly what you’re looking for, and we’ll be able to give a ballpark figure and some free electrical advice. If you like the ballpark price, we can schedule an appointment to go out to your property and give you an exact electrical estimate in writing. We’re a licensed and bonded electrician Pasadena area residents can depend on. You can also visit our website at www.theelectricconnection.com/electrician-pasadena-ca to find out more.

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. As a Plano TX electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a www.electricmaninc.com. Also, feel free to ask your questions in the comments section of our blog and we will get back to you soon.

May is Electrical Safety Month, which means it is the perfect time for circuit breaker replacement in Fairfax, VA. Of course, a part of ensuring electrical safety is making sure all your electrical fixtures are up to speed. Replacing your circuit breaker is one important step in ensuring your home far away from safety hazards like electrical shocks, power outages, and fires. Even though it can work well for a number of years, your circuit breaker will eventually show wear and tear that will begin to affect its performance, to the point where the safety of you and your family is jeopardized.