In many parts of the country, like Los Angeles where I do electrical work, electric vehicles (EVs) are being delivered to anxiously waiting customers. Deliveries are also starting in other West Coast cities as well as cities along the Eastern Seaboard. In the center of the country, not so much. In many cases, these areas will start receiving deliveries towards the end of 2011.

Let’s say electric car deliveries have already started in your area and you own of these new-fangled vehicles — a Nissan Leaf or Chevy Volt. How do you recharge the battery? In my last post, I talked about the simple and inexpensive option, Level 1 charging. This is using a charging cord that comes as standard equipment with your electric vehicle, similar to the one your cell phone comes with. You’ll need an electrician to make sure that you’ve got the right kind of outlet in your garage or carport (GFI outlet on a dedicated circuit). Your electrician will also need to check whether your electrical panel needs upgrading for sufficient capacity. Once it’s a go, plug your charging cord into the outlet and wait … a long time. For the Chevy Volt, 10 hours, and the Nissan Leaf, 20 hours — empty to full.

Even though Level 1 charging is slow, drivers who have short commutes may be satisfied with it because, if they work it right, they won’t start at empty. They’ll have charge left in their batteries and will simply top off at night.

Here’s how it can work. The range of the Nissan Leaf is about 100 miles. Americans drive an average of 33 miles a day. Drivers who drive the average 33 miles will use only one-third of the battery in a day. If they religiously plug in when arriving home, they will be able to top off at night in about seven hours and leave with a full charge in the morning.

In addition, the pressure to be fully charged when leaving home will ease as chargers are increasingly installed in public places. Chargers are already available in Los Angeles train stations, the main airport (L.A.X.), the L.A. Convention Center, and other public places. One can easily find the network of existing public chargers on-line. In addition, malls will begin installing chargers as an inducement for shoppers and workplaces as an employment benefit. In time, you’ll be able to recharge your battery while you shop or work. But we’re not there yet.

For hybrids, like the Chevy Volt, the issue of leaving home fully charged is less pressing. The Chevy Volt can drive for about 35 miles on a fully-charged battery. Once the battery hits empty, it, like other hybrids, the Volt turns to burning gas in a conventional internal combustion engine. This isn’t good for gas usage, but on the other hand, the driver may suffer less from “range anxiety.”

While you may be able to make Level 1 charging work, you also have the option of faster charging by installing a special Level 2 charger in your garage or carport. More on Level 2 Charging in later posts or find out more by clicking here.

For more about my company, The Electric Connection — all the stuff you wanted to know but were afraid to ask — . If you’re interested coupons for electrical work, for example, $50 off installation of a Whole House Surge Protector in the L.A. area, click on our coupon page.

One of the most unique light paintings I’ve seen, this image has a fluidity that causes the brain to confuse light for matter. It is neato. What makes it neato? Well, I think it’s mostly neato because the way the lines are painted makes the light seem like it has taken form and is alive.

3. Sphere of the Open Water

I do not understand how some light painters are able to create such perfect perforated light beams. But I like it. Light painting is able to create such perplexing images. How is one to feel about the image of a lonely self-circling disc of multi colored light? It’s a little sad. But also a lot of fun. That’s weird. And maybe that’s the particular weirdness of light paintings.

5. Or, Then Again, Maybe This Is the Particular Weirdness of Light Paintings

At least, that’s what my two-year-old would call this photo. What a great idea to take a long exposure of a car and to keep it underexposed, knowing that the brightness of the light “paintbrush” would balance out the composition. I chose this example because it emblematizes the way light painting adds imagination to reality.

7. The Whole Light Paint Bucket

First of all, if you don’t get the title’s reference, then don’t worry about it. It’s a video game thing. Second of all, if you have any kind of interest in photography but spend a lot of time working indoors, you’ve probably tried taking pictures of inanimate things around your office. (OK, so I’m talking about myself.) Chances are, you haven’t had much luck. The pics were probably more fun to take than to examine, and they have probably been long since lost in the black matter of erased data. In other words, the photos weren’t good. But this one happens to be really awesome. It’s fun and very cool looking. Hadukin! Hadukin to bad office still lifes! Hadukin to darkness! Ha. Du. Kin.

Sale posters and coupons aren’t the only ways to make sales. You can use lights to your advantage, too. LED retail lighting can be used to create an environment that makes shoppers feel welcome and caters to their needs and expectations. Use LED store lighting to draw people in, to keep them focused, to guide them throughout your store, and to save money. There are so many ways that the right lighting can be beneficial to customer satisfaction and sales. Take a look at the following list of do’s and don’ts to achieve store lighting that will help you reach your goals.

There’s more to effective LED retail lighting than meets the eye. Creating an efficient lighting system that looks how you want while promoting products, making customers feel comfortable, and, in turn, increasing sales involves knowing the technical details of potential bulbs and fixtures. These details include efficacy, color-rendering index (CCT), and intensity.

Intensity/Lumens

In the past, the brightness of incandescent, halogen, fluorescent, or high-intensity discharge (HID) lights was measured by wattage. Now, a common method for measuring brightness is lumens. The higher the lumens, the brighter the bulb. Comparable wattage is always listed on our product pages for compatible products. If you’re upgrading from incandescent to LED and want a bulb or fixture that’s similar in brightness, you can use lumens for an estimate of what incandescent wattage would be. Simply remove the last number of the lumen value. The number that’s left represents estimated incandescent wattage. As an example, an LED light that emits 600 lumens is approximately as bright as a 60-watt incandescent bulb.

Efficacy

As a business owner or manager, you’re most likely concerned with getting the biggest bang for your buck. By paying attention to efficacy, you can make sure that you get the most light for the amount of power the bulb or fixture consumes. Efficacy is the amount of visible light that is produced with a certain amount of power (watts). You can determine the efficacy of a product by dividing its lumens by the watts it consumes. For example, a bulb that emits 480 lumens and consumes eight watts of power (480/8) has an efficacy of 60 lumens per watt. A bulb with this efficacy would be a much better option than one that emits 480 lumens at 12 watts.

CCT

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. CCT is measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

The color temperature you choose will depend on the mood and shopping experience you want to give your customers. A retailer like Hollister for instance, who strives to create a laid-back, relaxed atmosphere, utilizes warm white and even ultra-warm white lights. Add on the cozy furniture setup and music and it’s clear that the goal is to get customers to hang out, relax, and spend more time in their store. Logic says that the more time you spend in a store, the higher the chances are that you’ll buy something.

Bed Bath and Beyond, on the other hand, uses a different approach to make sales. Their stores are filled with bright natural white light to showcase the wide variety of products that they offer. Customers are going to struggle in a store like BBB if it’s dimly lit. Knowing whether or not a shirt looks good is a lot different than buying new pots and pans. Dim light is flattering and more forgiving when customers are trying on clothes, but it won’t help you read whether or not your pans are dishwasher safe or scratch resistant. The lighting you choose should mesh well with the products you’re trying to sell. Using lighting to set the mood is a great idea so long as that mood doesn’t impact a customer’s ability to shop.

One of any retailer’s main goals when choosing lighting is to make sales. Use light to your advantage when trying to highlight certain things or create visual appeal. Make it obvious where new arrivals or sale items are. Use light to create a path that will guide customers through your entire store. Use LED sign modules for your store window or LED light boxes that feature your products. Anything unique, whether it’s cove lighting, lighting under a set of shelves, decorative light fixtures, or simply how you arrange your lights, is more likely to catch someone’s eye.

There are so many retail lighting options to choose from. Take a look at the list below to see some of the possibilities.

LED tube lights for fluorescent light fixtures

LED strips or puck lights for display case and shelf lighting

Retrofit can lights

Sign modules for store windows or creating custom signs

Canopy lights for outdoor overhangs

If your floor plan is constantly changing, it might be best to install a retail lighting system that can be changed as well. Track lights or gimbal and eyeball can lights can all be aimed in different directions. Depending on the products you’ll be displaying, you might also want to order new bulbs of varying intensities or color temperatures for these fixtures.

There are numerous places that are easy to overlook when planning your retail lighting project. Don’t forget the fitting rooms. This is where shoppers ultimately decide if a clothing item will work for them. Natural or warm white light is best, and a high-CRI LED light will show colors most accurately.

Illuminate aisles to guide customers through the store. Shoppers shouldn’t feel like they’re lost in a maze. Give them a sense of direction to know how to get where they want to go.

Don’t make it hard for customers to leave your store. Use LED light bulbs for exit sign backlighting and spotlighting. These lights are especially important during power outages or in emergencies.

If you’re putting your products on shelves, overhang from other shelves can cause shadows or limit light to the area. LED strip lights are a great solution for this. They have adhesive backings for easy installation, and most can be cut to fit the area that needs lighting. If you’re not crazy about the look of a strip under your shelves or if you want to eliminate hot spots (bright points of light), you can create your own LED strip light fixture using an aluminum channel and diffusing lens.

Make sure the checkout and customer service areas can be found easily in your store. Use different lighting or more lighting to make it stand out. Get creative with LED strip light fixtures around the counter, an edge-lit sign, or a custom-printed LED light box.

You might think that your parking lot has nothing to do with sales, but that is incorrect. If your parking lot is dimly lit, your store is not only less visible, but it’s also not as safe as it could be. A poorly lit parking lot can make customers feel uncomfortable and can lead to accidents. It can also be a problem for capturing security footage.  

blog post for more information.

To see more retail lighting options, visit our commercial lighting category, indoor and outdoor LED lights can also be found in our light box, fixtures, landscape categories.

Routine electrical service and maintenance is critical for all home or commercial buildings in the Des Moines Iowa area.   When you have routine electrical service done, it will keep your important electrical systems running longer and help you avoid expensive future repairs. In the event that there is an issue with your electrical system, your electrician can identify it during this routine visit so that repairs can be done before the problem becomes larger or even becomes an electrical fire.  Schedule your local electrician today and have your electrical system checked out.