There are many reasons and advantages of LED street lights over HPS, Metal Halide, and any other HID light used in the street lighting industry. These advantages of LED street range from cost savings, higher quality of light, and overall better efficiency.

LED is quickly becoming the “go to” light for all uses; residential, commercial, and industrial. From fully replacing and retrofitting LED is seriously becoming the majority within the world of lighting. The following list is going to cover 4 major advantages of LED street lights over HPS and Metal Halide, hopefully it shines some light on the true benefits of LED for even Metal Halide, you get results that show LEDs actually really do pay for themselves. If you use your lights often, making the switch to LED street lights may even pay themselves off within a few years.

If you’d like to see how much you could save, check out the diminishes over time. This is a highly important thing to note because with greater lumen depreciation comes added costs of maintenance.

Lighting fixtures such as HPS and Metal Halide have lumen depreciation that happens much earlier in their life and much quicker throughout the bulbs life. Whereas an LED takes a longer time to start depleting in it’s lumen output and much slower lumen depreciation than HPS and Metal Halide does.

While not all LED suppliers and manufacturers, MyLEDLightinGuide.com offers LED fixtures and retrofit kits that can produce at a very high MyLEDLightingGuide retrofit kits can run as high as 151 lumens per watt. While the typical retrofit kits on the marketplace (on average) run at only around 110 lumens per watt.

This is just a prime example of how powerful lumens per watt can be. The more lumens per watt you get, the less watts you will need to produce the same amount of light.

So, let’s compare the “average” retrofit kits compared to a Metal Halide light. Remember, the “average” retrofit kits run at around 110 lumens per watt. Compare that to a Metal Halide light that runs around (on average) 90 lumens per watt.

So just by these numbers we can start to see the power LED lights have and how they need less watts to produce the same amount of light that a HPS or Metal Halide light does.

In addition to #3 on this list, LEDs also provide a higher quality of light measure by the Color Rendering Index (CRI). Here’s two images that should do the talking:

Street Light Conversion From 400W Metal Halide to 120W LED using a LED Retrofit Kit (before)

As you can see after the 400W Metal Halide was replaced by the 120W LED fixture, the light produced is much brighter and illuminates a greater area. On top of that, it is using way less energy (400W down to 120W)!

Brighter and greater illumination can greatly increase safety and reduce crime by the simple fact of being able to see more throughout the night. Better illumination also creates safer roadways by not leaving any dark spots that may cause issues for drivers during night time driving.

Last month, I wrote via www.bet.com

2) A Dwarf Makes Giant News

Astronomers are given the spotlight as they announce that Pluto, the dwarf planet with a changing orbit, has passed Neptune to become the ninth planet from the Sun. It had been the eighth farthest since 1979. Of course, we now know that Pluto is not a planet at all but some kind of ball of rock and ice. 

 4) Re-imagining Literary History

Tom Stoppard and Marc Norman win the Writers Guild Award for SHAKESPEARE IN LOVE. Also nominated were Robert Rodat for SAVING PRIVATE RYAN and Andrew Niccol for THE TRUMAN SHOW.

6) You’re Still the One

Shania Twain wins a Grammy for Best Female Country Vocal Performance for “You’re Still the One,” in which the Twain passionately announces, “We’re still together, still going strong.”

9) Run to the Hills

Gloriously, and to the headbanging delight of metal heads across the globe, Iron Maiden announces that singer Bruce Dickinson has rejoined the band. 

11) The Tumultuous Days Continue for Kid Dynamite

Early in the month, Mike Tyson is sentenced to four years in prison for assaulting two motorists after a traffic accident in 1998. The judge gives him only one year of jail time, followed by two years of probation and a $5000 fine. Days after he begins his sentence at the Montgomery County Detention Center, he is put in solitary confinement for throwing a TV in the general direction of some guards. He is released from solitary after about six days.

13) Return Mail

TLC releases their third album, FANMAIL, after a five year hiatus. The new album sells 318,000 copies in its first week, and it becomes clear to the world that TLC “don’t want no scrubs.”

15) The Dawning of the Age of the File Share

The Artist Formerly Known as Prince makes headlines a second time as he files a lawsuit against nine websites for copyright and trademark infringement. He accuses websites of selling bootlegged recordings and offering unauthorized song downloads.

If you or someone in your family regularly uses a hairdryer, there’s a good chance that you’ve tripped a breaker at some point. Generally, this happens at the most inconvenient time—probably when you’re getting ready for work or a night out. There are a lot of electrical devices in your house, so why does the little ole’ hairdryer cause so many problems? Part of the problem is the way hairdryers work, but your power outlets and wiring could also be the culprit.

When the Problem is the Hairdryer

Believe it or not, hairdryers actually may  just as much power as a microwave (around 1500 watts). Many breakers are rated for 1800 watts, so they can’t handle the load if you have several other electrical devices—like a vacuum, TV, computer,  or lamp—plugged in along with the hair dryer.

Also, hairdryers run on a motor, and, like most motors, faulty maintenance can cause problems. In the case of hairdryers, they often have screens or filters that get clogged over time, causing the hairdryer to use more power than it would normally, and this extra power usage could  trip the breaker and possibly destroy the hairdryer.

The electrical connections in the devices themselves could also trip the circuit. A faulty cord, or wires making contact within the device can also kill your power.

When the Problem is Something Else

Diagnosing the Problem

24-Hour Emergency Electrical Service

We offer a 24-hour emergency electrical service to address any residential electrical issue. Give us a call anytime if your hairdryer has caused a mysterious short in your power or if you detect any other potentially dangerous electrical issue.

One of the best opportunities to save money is to convert Metal Halide and High Pressure Sodium High Mast lights over to LED. A typical high mast light consists of a tall pole, 50-150 tall and contains multiple fixtures attached to the pole, typically 4 to 12. The lower poles may be equipped with 400W Metal Halide or High Pressure Sodium bulbs, the taller poles typically are installed with 1000W Metal Halide or High Pressure Sodium bulbs.