New home construction is a dream many families have. There is a great deal of satisfaction to picking and choosing the layout of your home and adding elements that are specific to your family’s needs as well as your own decorative tastes. There are plenty of contractors who will give you the freedom to have a say in the planning stages, including what electrician company is hired to complete the work. Home construction has many elements. You will need plumbers, electricians, framers, painters and landscapers. Having a say in the hiring decision ensure you are getting the chance to choose the best company possible. At The Electric Connection, we understand your desire to check references and see our work. Some of the things that an electrician will be required to do for your new home construction are as follows;

*Install the electric panel. This is the hub of the electricity to your house. The electrician will ensure it is adequate for your home.

*Install the proper wiring for large appliances like the refrigerator, washer and dryer.

*Complete the wiring needed for outlets and switches. Wiring will need to be properly installed to pass inspection. The electrician will ensure the wiring is tight and secure to each of your outlets and switches.

*If you are having a standby generator installed, the electrician will take care of that as well.

*If landscaping is a part of your new home construction, your electrician can take care of installing and hooking up your outdoor lighting as well.

These elements may not look like much on paper, but the electrical wiring in a home is one of the most crucial elements. It is absolutely essential the work is completed by a competent and experienced electrical contractor to ensure the home is safe. This will also reduce the risk for future service calls. Give The Electric Connection a call today and see what we can do to help you fulfill your dream of new home construction.

When it comes to your home electrical system, safety should be your number one priority. Electricity can be dangerous when your wiring isn't connected properly, and a house fire can rip through your home and possessions with alarming speed, putting you and your family's very lives at risk. One common cause of fires is an electrical arc in the circuits behind your walls, when current jumps on an unplanned path from one conductor to another, potentially igniting wood or insulation along the way. Fortunately, you can protect your home against electrical arcs with arc fault circuit interrupters (AFCIs). Read on to learn more.

Your Electrician Can Keep You Safe

According to the National Fire Protection Association, there were 47,700 residential fires caused by electrical failures in 2011, causing 418 deaths and $1.4 billion in damage. Any steps you can take to prevent becoming a victim to one of these disastrous events is money well spent. And while conventional circuit breakers will automatically shut down if a circuit shorts or gets overloaded, they are unable to detect most electrical arcs. That's where the AFCI comes in.

The AFCI works by monitoring the current passing through the circuit, searching for unusual activity that could indicate an arc. When a problem is detected, the device immediately shuts down the circuit, lowering any opportunity the arc could have to start a fire. Keep in mind that some of your appliances or equipment may intentionally create arcs, but in a safe manner – the AFCI should recognize them and only trip during dangerous arcing conditions.

Find Out if Your Family is Protected

Your local code almost definitely requires your home to include ACFIs for circuits that lead to bedrooms, and if your municipality has updated its code in the past year, it may require interrupters for every circuit in the home. However, if your home was built before 2000, it may not have AFCIs installed at all, and it may be worthwhile to make an upgrade.

If you aren't sure if you have arc fault circuit interrupters, open the door of your main panel and look inside. Circuits that have AFCI capabilities are usually indicated by a yellow or green label. If you can't tell, ask an electrician to inspect your wiring and verify whatever safety features are included. The electrician can also make recommendations about whether you should consider upgrading your circuits and give an estimate on how much it would cost.

Don't Let Your Circuits Create a Disaster

If you need help installing arc fault circuit interrupters in your home, or otherwise bringing your wiring up to code, contact an expert electrician today.