These LED vaporproof light fixtures are only compatible with From top to bottom: fixtures with cool white, natural white, and warm white ballast-bypass LED T8 tube light bulbs

The weatherproof fixture is dust tight as well as water and impact resistant with a shatterproof polycarbonate lens. A water-tight cord connector, quick-connect wiring adapter, T8 sockets, housing clips, and surface-mount brackets are included. The T8 LED vaporproof light fixture operates within a 100-277V AC range and is covered by a lifetime warranty (fixture only).

But Iowa has us and the rest of the country beat when it comes to percentage of electricity demand provided by wind. Their wind power farms set a record of 20% of state electricity needs in the second quarter of 2011, with 4,000 megawatts of installed wind farm capacity.

In terms of total generation, the top wind power state is Texas, with 9,000 megawatts of installed capacity. Of course, Texas has a lot more people than Iowa, so wind power accounts for a lower percentage of its electric needs.

After the 2008 financial crash, the wind power industry, along with a lot of the economy, declined. However, it’s now on the upsurge. According the American Wind Energy Association, “7,354 megawatts of new capacity was under construction nationally by July 1, more than at any time since the third quarter of 2008.”

(Information for this article provided by Care2 newsletter and Brian Merchant, a Treehugger blogger.)

For information on how you can use your electricity more efficiently and save money, click on my tips.

Kim Hopkins

CEO, The Electric Connection

Click here to visit our website.

With the long days of summer fast approaching, many homeowners are contemplating a home solar panel installation. If you’re one of them, start making plans now!

Homeowners stand to get the most energy out of solar panels during the summer months, since greater sunlight will hit them. That translates to more savings and a greater immediate return on your investment.

But people tend to pursue these solar installations when there is more sun, increasing the demand and the workload for solar installers. We’re not complaining, but it does mean that sometimes orders aren’t completed with the lightning speed we prefer. The sooner you set up an installation, the sooner we can have it complete. There are sometimes more steps than just putting panels and a system on your home. Improvements to the roof or the yard to accommodate a system of your specifications can be necessary, which lengthens the process.

The advantages of getting a jump on the competition are significant. As soon as your system is active, you’ll see immediate reduction of your power bill, leading to greater and greater savings over the years, as municipal power costs rise.

Additionally, nobody knows how long the incredible financial incentives for solar panels will last. Longstanding federal tax incentives are currently bolstered by powerful rebates and incentives offered by local authorities but they won’t last forever. If you want to take advantage of them and get a solar installation switched on before summer arrives, give us a call to schedule a consultation. We can start the planning process right away and give you quotes the same day so you know exactly what a solar panel installation will look like at your home. We’re gearing up for a busy summer and we hope to see you out there!

Outdoor lighting of many varieties can effectively keep your space well-lit, safe, and inviting for you and your guests. These lights are typically reliable and long-lasting, but if they stop working and leave you in the dark, it can be a frustrating experience. Having an understanding of your lights and their potential issues can help you if you need to conduct outdoor lighting troubleshooting. There are several types of outdoor lights, all with different looks and objectives. Spotlights provide bright, direct light onto a specific area. Uplights are installed at or below ground level to shine upwards onto objects while downlights are installed high in a tree or structure to shine down. Floodlights use a motion sensor to shine directly onto an area when they sense someone there. Path or walkway lights are installed as individual fixtures along a walkway to illuminate it. Solar lights gather energy from the sun throughout the day, then turn on at night. These lights are installed in a variety of areas such as on a home; on a deck;  around a patio, deck, sitting area, or pool; or on the ground. There are also a variety of bulbs including halogen, incandescent, LED (light emitting diode) and bug light, each with their own uses and benefits. Each of these fixtures has several parts and can be susceptible to different issues depending on their parts and assembly. If your lights aren’t working properly, it can be concerning, and create potentially dangerous situations.

water and vinegar to remove residue and keep your lights shining brightly.While some outdoor lighting troubleshooting can easily be done on your own, outdoor lights are complex fixtures that aren’t always easy to diagnose and fix.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.