Electricity is an integral part of every home and it would be difficult to find a single room in your house that doesn’t have an appliance or fixture that doesn’t operate on electricity. That’s how reliant we are on it. Despite the fact that we can’t really function without it, electricity can be an extremely dangerous commodity; and if you have children in your home, you would have to take extra measures to ensure they are protected from electricity in the home.

Any parent who has had a toddler in the house will tell you that their little one was at one time or the other, fascinated by electrical wires, electrical outlets and appliances. Most children are very curious at that age and don’t think twice before putting a dangling table lamp wire into their mouth or they may try to insert their little fingers into an open socket etc. In short, your home becomes nothing less than a danger zone for your child.

The good news is that it’s possible to address most of these dangers and protect your children from the hazards that these electrical installations pose. Here are some of the things that can be done:

Electricity is something that poses a distinct danger to children. As a parent or a caregiver, it’s your responsibility to be proactive with protecting children from this potential danger. For installation of child-proof electrical installations, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

What’s all the buzz about? Through smart-tech and general technology improvements, modern homes are getting safer and safer every year, which we can all be happy about. But that doesn’t mean we as homeowners should let our guard down! Electrical safety is still a big, big deal, and tons of fires are reported every year due to electrical failures or misuse. Some of the causes are even really odd, or something you might not expect. Do you know all of the dangers potentially lurking in your home?

At Kolb Electric, your safety and the electrical safety of your home is our absolute priority in all cases. Superior electrical service may be our pride, but safety will always come first and foremost! Today we’re here to talk about some hidden home threats, and what you can do to avoid them.

Looking for electrical services for your Bethesda home? Contact Kolb Electric today!

We all know that there are risks with say, outlets, or a damaged appliance. But there are plenty of problems that can come right out of the woodwork (sometimes literally!). Be aware of these potential problems, and prepare your home accordingly:

Need some trustworthy service from a certified electrician to shore up the defenses in your Maryland home? Contact Kolb Electric today! We’ve been putting the needs of our consumers first and foremost for nearly a century, and our experts are always ready to assist!

Damaged wiring, DIY repairs and faulty installations are all common electrical mistakes which if not corrected in time can be hazardous and lead to short circuits, injury and electrical fires. If you encounter any of these 7 mistakes in your house, fix them immediately as they pose a serious risk to life and property.

Most of us will not be leaders with the ability to speak and the bravery to act as Martin Luther King, Jr., but we can change the world for the better in small ways.  Even one bulb at a time…

The world of illumination is changing quickly and advancing into a new frontier with light sources that are more durable, more energy-efficient and better for the natural environment.  While we still have a choice, future lighting installations with LED (light emitting diode) lamps will provide the best light for your home or office space.

To make the best choice, there are a few lighting facts you should know.  All LEDs are not created equal, so read on to educate yourself and make a change to LED with confidence.

Learn what light sources are available and the limitations and benefits of each light source, so that you may choose the best one for each application.

•The right lighting will always help you look better, feel better and perform to the best of your ability.

•The right lighting will always be energy-efficient.

•The right lighting will always work well with the natural environment, making the most of sunlight streaming in during the day and delivering illumination in the most eco-friendly manner.

•The right lighting will last.  Choose good quality bulbs and light fixtures that are guaranteed to provide excellent illumination, equipped with fine finishes and components that are durable.

1.  KNOW YOUR BRIGHTNESS LEVELS IN LUMENS

New bulb cartons are required to prominently display the brightness level (measured in lumens (lm)).  In the past we have determined bulb brightness in terms of energy consumption in watts (W), but now we must learn to think in lumens (lm).  Here is a quick conversion chart to help get you started:

Lumens            Old Incandescent                                             LED

2600 lm————→150W——————————–→25-28 W

1600 lm———— →100W——————————–→16-20 W

1100 lm————→75W———————————-→9-13 W

800 lm————-→60W———————————-→8-12 W

450 lm————-→40W———————————-→6-9 W

2.  CHECK OUT COLOR QUALITY:   Correlated Color Temperature (CCT) and Color Rendering Index (CRI))

•CCT is measured in Kelvin’s (K) and is an important factor determining the quality of light for your specific application: Warm White or Soft White is about  2700-3500 Kelvin’s (K) and Bright White light is about 4000 K+

•CRI is measured on a scale of 0-100 and is an important measure of the degree to which your light source will show the true colors of all that is being illuminated.  Color rendering for decorative indoor lighting applications should be between 85-100.

3.  FACTOR IN DIMMING CAPABILITY

Most dimmers work by reducing the amount of electricity sent to the bulb.  But with LED the correlation between brightness and energy consumption is much different than with incandescent illumination.

Because of this difference, LEDs are not always compatible with traditional dimmer switches.  You either have to replace your switch with one that is compatible with LED or look for replacement LED bulbs that are compatible with standard incandescent dimmers.

4.  FIND SUITABLE BULB-TO-LIGHT FIXTURE MATCH-UPS

The reflector and fixture type will play a significant role in determining the light output from the light source (bulb).  Look at colored lenses and fitters, as well as shades and shielding to determine how they will help steer and direct your desired level of illumination.

When looking to replace an incandescent bulb with an LED bulb in a lighting fixture where the bulb will be totally enclosed, be sure to check that your LED is specifically made for an enclosed or recessed light fixture.  LED bulbs run cooler than others, but they do produce heat. To protect the quality of the LED chip and the performance of your LED light source, LED fixtures are specifically engineered to provide adequate heat-sinking.

5.  BEWARE OF THE LOWEST “BINNER” and COMPARE PRICE VS. QUALITY

“Binning” is the process by which LED chips are sorted.

Prior to being marketed in fixtures or light bulbs, LED chips are sorted into bins according to their light output (lumen output) and color temperature.  There are clear standards set to measure the lumen output of each LED chip.  LEDs chosen from bins with higher lumen output are of better quality.

Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation and are not as bright.

Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

Philips medium base LED

Philips LED reflector, perfect for landscape and outdoor lighting applications

Dimmable LED from Philips

Kolour One LED bulb offers full 180 degree illumination

Look for all new LED bulbs from Philips, Kolour One, Satco and Bulbrite, now available at 1800lighting.com