Garbage disposals have really changed the way we cook and clean. They make things a lot more convenient—until they clog up. And if you’ve got a lot of guests coming over for Thanksgiving or throughout the holiday season, there are a lot more opportunities for your garbage disposal to jam up, or for food that didn’t belong in the disposal to clog up your drains.

Make sure that your family members are aware of what items do or do not belong in the garbage disposal. Keep your pipes clear for the holidays by doing your best to keep these items out of the garbage disposal.

We hope that most of your guests already know this, but it’s certainly worth a reminder for all of the kids enjoying Turkey Day with you. Make sure they know that plastic wrappers, twist ties, and other small pieces of trash always go into the garbage!

That includes big things like meat bones, but also popcorn kernels, seeds, fruit pits, corn cobs, and more. It’s easy to dump the entire plate into the sink without really thinking about what’s on it, but make sure hard food items do not jam up the garbage disposal motor.

Fibrous, or stringy, foods can wrap around garbage disposal’s impellers and cause the motor to jam. This includes foods and food items like corn husks, celery, and onion skins. We recommend throwing these items into the trash instead.

Fats, oils, and grease are infamously known as FOG in the plumbing world. These substances seem to be harmless, unless you know about their properties. FOG can clog up the drains easily because it solidifies as it cools. Although you may pour it into the drains as a liquid, it clumps into a gooey mess in the drains. It could cause problems for the disposal as well.

Make sure to leave out a separate container to store FOG while you’re cooking, like a recently-opened can. Or, put tinfoil in a mug and pour it in there. Toss it in the trash once it cools.

It is a cold October evening and you are preparing dinner. You are in full motion with all your appliances working overtime to get the meal done as soon as possible – and the power shuts off. Not only are you frustrated because you are set behind schedule but now you have to try to fix the problem. This happens to people on a daily basis and is a nuisance that can be avoided with the right electrical usage and correct setup. Lets walk where you should go from here.

As we have discussed in the past, the electrical panel (or breaker) is an integral part of the home’s electrical system. It regulates all incoming electricity and manages it throughout your house. When a breaker shuts a circuit off, or it “trips”, it is protecting you and your home from a potentially dangerous situation. The breaker will shut off that circuit because it has detected high voltage, high temperature, or another internal problem. If the breaker does not trip the circuit that is affected can overload and create an electrical shock or electrical fire.

To get your electrical breaker back on, identify the circuit that is in the off position and flip in back to the on position. With a properly labeled electrical panel it can be easy to quickly identify the affected circuit. If the breaker feels hot the touch or the circuit immediately trips again, do not attempt to turn it back on and call an expert electrician. Sometimes a circuit could trip due to a high amount of usage and may only be a minor problem with no repercussions. But if the breaker immediately trips when turned backed on or it trips regularly, there is a larger cause and the problem should be addressed as soon as possible.

There are a number of reasons why breakers could trip. The circuit that is being turned off could potentially have too much load and being overloaded. There could also be a problem in the wiring itself that is causing electrical surges and shorts that the breaker is detecting. It could also be a problem with the breaker itself. The panel may be old and reaching the end of its functionality. It may be time for the panel to be replaced.

It is not a good idea to keep turning on your breaker if it continuously trips. If you cannot identify a pattern in your routine that is causing the trip you should contact an Expert Electrician. They will be able to tell you if the problem is originating from the wiring or within the panel and even fix the problem for good.

Don’t put up with tripping breakers, it will become more than just an inconvenience. Get the right help and have peace of mind that your home is safe and dinner will get finished on time.

Tube lights are found in many applications and environments such as office buildings, hallways, garages, and really anywhere that has a low and flat ceiling. Although fluorescent tubes contain small amounts of mercury and isn’t a whole lot, you still want to avoid the breaking of a fluorescent tube and any exposure to mercury if possible.

Whether you are simply replacing a burnt out fluorescent tube with a new one or are switching over to a new technology (such as LED), there is a proper way to do it. By following these steps along with others that you may find, you will allow yourself to reduce risk of harm for yourself, staff, or whoever is the one physically replacing the tube lights.

Let’s answer some common questions and issues that people seem to face when tasked with this issue of replacing mercury filled fluorescent tubes…

By recycling rather than simply throwing away your tube lights, you opt-in for the environmentally friendly route of switching out old tubes. If you choose not to recycle, you are allowing toxic mercury to freely enter the environment, which of course is not good.

Not only do you prevent mercury from freely entering the environment by recycling, but you also reduce waste. How exactly? Part of the tube is reused for new tubes that will be resold and used. This allows for less waste and this goes back to the saying “Reduce, Reused, Recycle.” So by taking part of fluorescent tube recycling, you allow the process of recycling to continue and prevent waste from entering the landfill!

When taking your tubes out to bring for recycling, this is probably the most difficult step you need to be most cautious with. The best option you have is to be prepared and know what to do if things go “south” as they like to say.

Here is what you can do to prepare for the removal of fluorescent fixtures:

And for one thing that you should always remember for dealing with a broken tube is this: NEVER VACUUM. By vacuuming, you make glass particles go airborne and that is a highly dangerous situation to be in.

For more tips on how to clean up a broken fluorescent or CFL lights, using this tool from Earth911. It allows you to search what you need to recycle and where you are located. So you go to that tool, type in ‘fluorescent’ or ‘CFL’ along with your location and you will surely come across the closest place to recycle fluorescent tubes (along with really anything else you may want to recycle).

If you are in the process of disposing and recycling your fluorescent tubes, what is going in there to replace the ones you are removing? If the answer is “more fluorescent tubes,” may we ask why?