Electronics are some of the most expensive investments in any home. So how can you be sure you’re safely protecting them from electrical surges? With a whole-home surge protector, you can rest easy that all of your electronics and appliances are protected in the event of a lightning strike or electrical surge.

A whole-home surge protector is installed in your main electrical panel in order to cut off potential electrical surges from flowing into your home’s internal wiring. Whole-home surge protectors can protect up to 40,000 amps of current flowing into your home. When an electrical surge takes place, the device detects the excess energy and safely diverts the surge through the home’s grounding path. This will protect your home from:

This provides an easy, catch-all system that ensures every plug in your home is safe from a surge. Never have to worry about plugging your expensive electronics into standard plug-in surge protectors.

According to the Insurance Institute for Business & Home Safety, the Maryland/Virginia/Washington, DC area is considered at moderate risk for lightning strikes. These, along with other powerful weather events, are strong enough to fry both large and small electronics, including:

By investing in full-home surge protectors, you save yourself the risk of potentially paying thousands to replace your expensive electronic devices and appliances. Don’t suffer later when you can prevent damage up-front!

It is important that typically, it is recommended that you double protect against electric damage by also using standard wall surge protectors. This will make sure that no matter how strong the electrical surge is that hits your home, your valuable electronics will stay safe.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. Fortunately, great whole-home surge protection is available and affordable! For maximum protection, you’ll want to install a whole-home surge protector at the circuit breaker box and supplement it with smaller surge protectors on individual outlets. A whole-house surge protector can protect your home from up to 40,000 amps of current (normal household power is between 200 to 300 amps). When something like a lightning strike causes such a surge, the surge protector detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Kolbe Electric’s electrician team can easily install a top-of-the-line surge protector with ease. Our whole-house surge protectors usually come with lifetime warranties and added protections for possible losses. This means your electronics are double-protected against future loss due to electrical surge! Call Kolb Electric today to learn more about our whole-house surge suppressors for your Maryland, Washington, DC, or Virginia home.

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.

Pay as you go electricity plans allow consumers to pay for their electricity in advance. The plan, which uses prepayment meters, helps consumers to monitor and control the way they use electricity. This saves on energy costs.

Keypad based prepaid meters: This meter has a keypad to input the electricity token number. Consumers purchase the credit using a variety of methods. These include visiting the agent, paying through banks or mobile payments in some countries.

Key meter: Consumer uses an electronic key loaded with the tariff information and credit.

One way card system: Uses a disposable card. The user purchases power with a reloadable debit card. The loaded card is then passed near the meter, which has an in-built card reader.

Two-way card systems: Uses a smart card and the meters have a real-time, two-way communication capability. It is one of the most secure, but more complex and expensive methods to implement.

These allow consumers to interact with their meters and query balances using their mobile phones by sending an SMS to a monitoring system. In addition, the user is able to track electricity use by the hour, day, month or annually using the phone or online access.

These smart prepaid meters offer easier top up options. They include online payments or by text, as well as scheduled and auto top-ups.

When using a prepaid meter, the customer must keep track of the remaining credits and replenish to avoid disconnection.

Ensure there is enough credit when going away for long periods. The meter will continue collecting the standing charges even when on no load. Consumers should ensure they have enough credit to last until they return.

Some crooks will take advantage of the consumer’s lack of knowledge and offer them cheaper credits than those bought directly from the utility company. For example, they will sell their credits at half price. This is more common with Key Prepaid Meters and the crooks will usually have master Keys, which they use to top off the consumer’s meter.

If the energy company finds out, the consumer ends up paying twice for their electricity; first to the crook, and then to the energy company.

To avoid falling victim: