Have you recently had a home inspection completed or are you getting ready to purchase a home and don’t understand the inspection report? A certified electrician can remedy:

These problems may be eyesores, or perhaps you don’t notice them at all, but almost all of them can be hazardous and require immediate attention by a certified electrician. Before you start worrying about your latest home inspection and get knee-deep in all the repairs at once, ElectricMan can help you decode each project and give you a quote on needed repairs. Remember, it’s about your family’s safety, so it’s always best you pick your electrician based on the quality of work and his reputation rather than letting the seller pick the repairman.

If you suspect your home is subject to some of these problems, or for help interpreting your home inspection contact a certified electrician at ElectricMan today. ElectricMan is a trusted, local ElectricMan website and don’t forget to ‘like’ us on Twitter, YouTube.

GFCIs or ground fault circuit interrupters are safety devices that have been extremely effective in reducing the total number of home electrocutions by almost 50%, in Australia. Most new homes and businesses now have these devices installed in locations where water is present in and around the premises. It’s important that electrical installations in outdoor locations be protected from wind and rain; that’s the one way to prevent shock hazards.

Before we understand what a GFCI is, let’s understand what a ground fault is. It is the unintentional flow of electrical current between the source and any grounded surface. If the electrical installation isn’t properly protected, an individual that comes into contact with an energised part can suffer an electrical shock.

For instance, if the person is holding any deteriorated electrical cord attached to the hair dryer, and it happens to touch a plumbing fixture they are using, they can get electrocuted and will suffer a painful shock.

This small receptacle has “test” & “retest” buttons on it. It may sometimes be built into circuit breakers that are installed in the main electrical panels. When electricians are conducting an electrical audit, they also test whether the GFCIs are functioning properly. They might also recommend that you get GFCIs installed in the vicinity of plumbing fixtures.

These are extremely useful electrical safety devices which trip the electrical circuits in case they detect any leakage current or ground fault. An individual that’s become the pathway for a leaked current can get a severe shock or will get electrocuted. It is important to get GFCIs installed in any outdoor or indoor areas where you feel that water might come in contact with the electrical installations or fixtures you have on your property.

Ideally, the areas where GFCIs should be installed include:

It is important that these devices be checked with regularity. If you have opted for an electrical maintenance contract, the electricians will ensure that the GFCIs are checked along with all the other installations; this will help confirm they are working as they should and that they provide the necessary safety to those living or working on your premises. You can also test the GFCIs on your property, by following these basic steps:

If you aren’t too sure about whether you have GFCIs installed at the right points on your property, call in your local electrician. They will inspect all the fixtures and inform you if GFCIs have to be installed in any specific rooms or outdoor spaces. Aside from this, they will also audit the rest of the installations and tell you if any upgrades are required.

Have you been calling for help from an electrician in Los Angeles more often than you’d care to admit? If you have old wiring, whenever you’ve had an electrical service call the electrician should have made you aware of the wiring situation. A knowledgeable Los Angeles electrician will tell you when your electrical wiring needs to be replaced.

Cloth insulated wires may not be grounded properly and are definitely unsafe by today’s standards. The cloth actually falls off, leaving exposed wires in vulnerable areas of your home. If a home’s wiring is aluminum, the wiring shrinks and expands at contact points, causing a potential fire hazard. Neither method is safe. If you think your home may contain either of these types of wiring, The Electric Connection specializes in wiring upgrades for older homes.

The knob and tube wiring that electricians in Los Angeles used before the 1940s employs the use of ceramic knobs and tubing, with wires running through the tubes. It is not a grounded system, so plugging in any modern appliances or electronics is an immediate fire hazard. There are a number of insurance companies that will not offer fire insurance to homes with this type of system. An electrician in Los Angeles from The Electric Connection can upgrade knob and tube for you also.

Homeowners hear the words “electrical upgrade” and immediately start to see dollar signs. With the Electric Connection, the prices are affordable and the work that is recommended is an investment, not an expense. Older wiring systems are not only unsafe; they’re raising the cost of your electricity. More modern systems were developed with efficiency in mind. When a home is upgraded from knob and tube wiring or aluminum wiring, the electric bill immediately goes down, as does the insurance bill and the home repair budget – no more calling a Los Angeles electrician once a month for blown fuses or shorts.

The Electric Connection is the electrician Los Angeles CA homeowners contact most often for electrical upgrades. With over thirty years experience and twenty-five full time employees, all residential and commercial electrical services needs are handled quickly, efficiently, and affordably. Whether it’s a rewiring, an installation, or new construction, the professionals at the Electric Connection can handle it in a timely fashion. If you’re an LA homeowner, your family and your wallet will be happy that you did.

Click here to read more.