Prisons and correctional facilities are full of security threats, it’s just common sense.

That is why it’s a major task and a seemingly forever ongoing one to try everything in the book to reduce threats and increase security for everyone in, near, or even outside the facility.

Today we wanted to address how we can solve 2 major correctional lighting system and things you should look out for when finding fixtures perfect for your building and budget.

Firstly, a LED prison lighting system will reduce indirect stress and irritability in both inmates and staff.

Secondly, LEDs within correctional buildings will improve detection of movement, which we all know is crucial.

How you ask? Well, lets talk about each one individually and break it down a bit more than just one sentence. From there, we will talk about how to go about making the conversion over to LED, like we mentioned at the start.

Have you ever been around a light that was flickering and or buzzing? It can get annoying, and fast. Imagine living under these conditions, everyday all day; no break other than a few hours when you go outside. Sounds like no fun, and it can lead to some serious stress and irritability issues for both inmates and staff.

For obvious reasons, additional stress on inmates will never produce a good outcome for anyone. But, another important point is that this can effect your staff and guards too. It can affect their ability to perform at full capacity, which in combination with highly irritable inmates is not a good mix whatsoever.

With LED technology, they will never be susceptible to flickering nor buzzing. Not even near the end of the lights lifespan will they flicker or buzz, unlike other technologies commonly still used in such facilities. Thus, you can avoid any stress or irritability which may be caused from flickering / buzzing lights.

If you can’t tell where everyone is at every second, you’ve got an issue. This is especially important for outdoors during the time when it is dark out. Sure, some light is better than none; but why jeopardize your operations with a flickering light when you could upgrade to LED and get rid of the issue entirely?

As you may or may not know, flickering lights make it harder to not only detect movement, but also identify humans. Think of a strobe light, it’s a bit harder to actually make out what is going on entirely. This holds true with a flickering light, even if it isn’t as bad as a strobe light is.

Here we are going to list a couple of the other major general benefits that LED technology offers over other technologies such as metal halide, HPS, fluorescent, and similar.

There are really only two routes you can take, LED retrofit lighting kit will work perfectly. On top of that, retrofitting is a much cheaper option (typically) then a full replacement is. So, if you don’t need to fully replace then stick with retrofit kit LEDs and you will save a lot on your lighting system investment.

Conclusion

Flaws can always be picked at, especially in such tedious and unpredictable environments like the one we are discussing in this topic.

What does CAN Bus mean?

CAN Bus means Controller Area Network Bus. This system monitors your vehicle and reports operating conditions. CAN Bus systems are commonly found in European vehicles such as BMW, Audi, Mercedes, Volkswagen, Porsche, and in many American vehicles. While most late model American vehicles have CAN Bus systems, it is always good to check with your vehicle dealer to see which system your vehicle has before purchasing electrical products.

Will CAN Bus LED Bulbs Prevent “Bulb-Out” Indication?

Each vehicle has different requirements that the CAN Bus system is looking for, but in most cases CAN Bus LED bulbs should prevent a “bulb out” indication in areas such as tail, brake, and running lights. If you use a standard LED bulb that is not a CAN Bus application, you would consistently get a “bulb out” dashboard indicator because your system can’t communicate with a standard LED bulb.

Will CAN Bus LED Bulbs Prevent Hyper-Flashing?

CAN Bus bulbs will not prevent hyper-flashing of turn signals. These bulbs are communicating with the CAN Bus system, but the relay still needs an appropriate amount of load to operate correctly. Your electrical system could require load resistors or an electronic flashing relay to stop hyper-flashing. The factory relay causes the hyper-flash when it thinks there is not a bulb working. For more information, see our blog post here.

More Problems

Okay, so light pollution isn’t good. But perhaps you’re thinking, if we turn off the lights that illuminate our streets and sidewalks, homes and buildings, they’ll become dangerous. Car accidents are bound to increase on dark, busy streets, and walking on sidewalks out at night would be scary to say the least. Not to mention a poorly lit home is a target for sinister intruders.

So what do we do? Is there any sort of compromise?

New LED lighting offers some hope, but it’s certainly not all sunshine and rainbows.

How LED Light Can Help Decrease Light Pollution   

How LEDs May Add To Light Pollution

When I talk to people about LED lights, the response is often the same: “That’s very exciting. LEDs are really cool. But they’re so expensive.” While you can say the prices of LEDs are going down, and you can promise that once you buy an LED it will save loads of energy, this doesn’t change the fact that many LED lights and light fixtures still cost a pretty penny.

But finally, LEDs are becoming less expensive. Today, you can buy a high quality LED A lamp for well under $50, and many kinds of LED fixtures for around that price as well. For today’s blog post, I’ve come up with a list of my 10 favorite LED task lights that cost less than 60 bucks each.  If you’ve never used an LED light fixture before, give one of these a whirl and I’m sure you’ll be pleasantly surprised.

1. The LED Flexible Work Light – $29.90