The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

LED pole lights provide an opportunity for businesses, industrial buildings, and other larger outdoor venues to have access to a high-quality source of light that’s energy efficient. Pole lights are the most common option for outdoor lighting of parking lots, walkways, neighborhoods, and building grounds. That is because this type of fixture creates a large amount of illumination through a beam, which the user can direct in a specific area. Before buying LED pole lights, buyers need to consider a few key factors.

Commercial, residential, or industrial uses are acceptable options for LED pole lights, depending on the specific model selected.

Key considerations when making this purchase include the following:

Comparing all of your options is important. Finding the right balance isn’t just about costs but quality of the product and long-term options.

LED cove lighting is a great way to add accent lighting or color to any room, and LED strip lights are the perfect product for the job. LED strip lights can be used for any type of RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. variable color temperature strips are also available and can be used with a compatible controller and remote. Installing LED cove lighting is easy, and we’ve provided basic instructions for a standard L cove, recessed ceiling/tray ceiling cove, or crown molding cove in a 16-by-16-foot room. We recommend that you have a certified electrician wire your strip lights to power.

Tools and Optional Materials:

The way you install the strips or even the number of strips used might vary depending on the room size or the style, shape, and size of your cove. The steps and materials needed for this particular installation could be used in a room with a standard L cove, crown molding cove, or recessed ceiling/tray ceiling cove. The photos below show several different cove types.

DIY “L” Cove

Valence Cove

Crown Molding Cove

8) If desired, use a double-sided 3M foam pad to mount the amplifier in the middle of strips 1 and 3. Cut the foam pad, and use it for both amplifiers.

9) Repeat steps 6-8 for strips 2 and 4.

10) If you are experienced, connect your power supply to power. Otherwise, hire a certified electrician to set up power for your new LED cove lighting.