Without electricity, we would have an extremely difficult time getting through our day. We rely on it for everything from making our first cup of coffee in the morning to charging our cell phones as we sleep at night. All of the appliances we use on a daily basis must be plugged into an outlet. When those outlets are not working properly or pose a threat to the safety of your home, you need to call an electrician in Burbank. You can count on the team at The Electric Connection to send out a knowledgeable electrician to take care of the problem.

There are a number of different reasons why an outlet may be giving you problems. You may not even realize an outlet is faulty and assume an appliance is on the fritz or an incident was just a fluke. The following signs indicate there is a problem that needs attention.

• Sporadically working • A crackling noise or smell of burning wires

Any of these symptoms can suggest a serious problem is lurking behind the walls that you cannot see. Electrical fires are one of the leading causes of home fires. It is imperative you hire somebody who has the proper training take care of your Burbank electrical needs.

While the electrician is investigating the problem, the wiring will be inspected to determine if it is outdated or unsafe. If the outlet that is causing the problem is in the kitchen or a bathroom, it would be a good time to have the outlets in those areas upgraded to GFCI outlets. If you would like to make your appointment to have your outlets inspected, replaced or upgraded, give The Electric Connection a call today.

One of the biggest and best advancements to hit modern U.S. homes today is the advent of the home automation system. These systems allow you to have control over your house at your fingertips. There’s a combination of hardware, software, and appliance-based interfaces that goes into creating this system, and therefore it’s only natural that something can eventually go wrong.

Even the greatest technology can have bugs that will need to be worked out. If you have problems with your home automation system, the best thing you can do is give your professional electricians a call to help repair the damage and get you back in control. However it may also be helpful to understand what some of the most common issues are, and how we troubleshoot them.

Naturally, when you go to integrate home automation into your home, you are going to have some home systems—if not all—that are older and have been with the home for a awhile. Integrating these older electronic systems with the new one of your home automation system can be challenging, and it may take some time to understand where the integration problems exist.

This type of problem usually presents as a non-response from whatever device or appliance you are attempting to use, or limited functionality from that system. Your professional electrician will know how to repair these issues as they have experience with these types of issues.

Your home automation system is completely interconnected and connected to your home’s electrical system, and therefore depends heavily on the wiring of your electrical system. So if you experience any type of electrical short, poor wiring, or faulty wiring, then there can be a malfunction of your system. Your professional electrician will look at the electrical layout for your home automation system—which can be complex—to determine the exact cause of the problem.

Sometimes due to unforeseen circumstances your home automation system may suffer from physical damage. When that occurs, a professional will be able to carefully inspect the system and repair or replace the components that were damaged to obtain full functionality of your home automation system.

The National Safety Council Electrical Safety Facts & Tips can help minimize electrical hazards and cut down the risk of accidents through education.

Electricity is nature’s most versatile form of energy.  The power of electricity can be dangerous if it is not used correctly. Electrical energy can damage property and ignite fires. It is important to ensure your safety around “Hot” electricity. The hazard of electricity cannot be eliminated, but it can be controlled. The more you understand about electrical energy, the safer you will be at work and home:

What causes electric shock?You can get an electric shock if you touch a grounded surface and hazardous electrical equipment at the same time. The shock happens when the flow of electric current (amperage) from the electrical equipment goes through your body to the ground.  Just a small amount of amperage can hurt or be fatal.

Protecting yourself at work

Many homeowners know the pride and satisfaction that results from completing DIY repairs and improvements. But when it comes to electrical work, the stakes of making a rookie mistake can be high.

There are several common electrical projects that aren’t complicated or extensive, but even the simplest jobs can result in serious injury or property damage if they’re performed improperly. Before making any plans to engage in a DIY electrical project, it’s important to know the risks.

What Can Go Wrong

Electricians undergo an enormous amount of training in order to earn the licenses and certifications they need to do their work. That’s because mistakes could not only be dangerous for them, but also for anyone in the homes or buildings they’re working on. Even if you know your way around the circuit box, here’s what an electrical mishap can bring:

Hiring Electricians Saves Money

One of the most common reasons why electrical novices attempt this sort of work is to save money. But that plan can easily backfire even if no one gets hurt in the process.

Poorly performed electrical work can spark destructive fires. It can also fry circuits, destroy fixtures and even damage major appliances. When things go wrong, the cost of repairs is usually several times what it would cost to hire an electrician in the first place.

Making matters much worse, homeowners insurance companies will typically ask for confirmation that electrical work was performed by a licensed electrician before covering any damage from a related event. If your insurance carrier learns that you did the work on your own to save a few dollars, you could lose your claim or even invalidate your policy. Be sure you understand your full policy details before engaging in DIY work.

Know the Code?

When you hire an electrician, you’re not just passing the risk along to a professional -- you’re hiring someone who has knowledge you don't even realize your lacking.

Electrical work is constantly getting safer and more reliable through updates to the electrical code. Licensed electricians are required to keep up with this code as it evolves, so when you work with a professional, you can count on receiving the safest electrical work possible. When you go it alone, you may follow outdated methods because you weren’t aware of the code update.

Don’t take a chance. Your life and home are too valuable. When you need electrical work performed safely and properly, call upon your knowledgeable, licensed, local electricians.