How many light bulbs have you changed in your lifetime? It’s a simple action, and often one that we don’t put much thought into, but what if the simple act of changing a light bulb could make a profound impact on the environment, and the well-being of future generations?  As experienced Plano Electricians, we at ElectricMan Inc. have made it our mission to help bring knowledge of Alternative Lighting Solutions, electrical efficiency, and environmental responsibility to the forefront of everyone’s minds. The reality is that even small changes can yield huge benefits when it comes to energy savings. According to www.EnergyStar.gov:

“If every American home replaced just one light bulb with a light bulb that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”

Think about the changes that you can make by simply replacing the outdated incandescent bulbs in your home as they burn out with one of the Alternative Lighting Solutions below. Here are some details on a couple of the most popular Alternative Lighting Solutions available.

Compact Fluorescent Lamp: Modern CFL bulbs for use in homes consist of a curved fluorescent tube and electronic ballast in a single unit, designed as a direct replacement for standard blubs. They use 3-4 times less power than comparable incandescent bulbs. These are great options to replace your standard light bulbs, but they do have a few small drawbacks. According to an article by PopularMechanics.com, while CFL’s do have a much longer lifespan than standard bulbs, they often lose some of their brightness long before their expected lifespan is up, and this is increased in fixtures that don’t allow for efficient cooling of the ballast located in the base of the bulb. Another documented fact about CFL bulbs is that they do contain mercury, which means that they must be disposed of properly by taking them your local approved recycling center. You wouldn’t throw a battery out with the daily trash would you? So you shouldn’t throw these out either.

Light Emitting Diodes: LED’s are a form of “solid state” lighting that have become available recently to homeowners as an incandescent and CFL replacement. Using small light emitting diodes mounted directly to circuit boards, these are highly efficient, and have fewer parts prone to failure, allowing for an expected realistic lifespan of 20,000 to 30,000 hours, when operated at recommended temperatures. While initial costs for these bulbs are higher than incandescent and CFL options, long term energy savings are where this alternative lighting option truly shines, with the average LED bulb using approximately 12-17% of the energy that it takes to run an incandescent bulb of similar output, the end result is a bulb that costs drastically less to power over time.

As a point of comparison, here is a simple chart of the energy usage of LED and CFL bulbs compared to incandescent bulbs, and the output associated with them:

Lighting technology has changed a lot in the past decade, and it is pretty amazing to see what could be on the horizon for future lighting innovations. Take this for example. While most homes will never need this amount of output, it’s pretty impressive to see that something the size of a Christmas tree light, like this plasma bulb, can put out more light, more efficiently, than the giant bulbs that we use in street lamps!

The great thing about these changes is that they aren’t something that requires a huge change in your lifestyle, so they are some of the easiest ways possible to help the environment, and lower electric bills while you are at it!

Solar energy is taking off. In the first quarter of 2015, solar accounted for half of all new electricity production in the United States. That's great news for consumers, because a good deal of that energy is generated by residential solar panels, which reduce the amount that homeowners pay for electricity. These sun-loving panels aren't just for experts and electricians – they are becoming ever-more accessible to the average homeowner. Read on to learn more about how the industry is heating up and how you can come along for the ride.

Prices Falling, Installations Rising

Solar, as well as its renewable energy cousin, wind, are poised to produce an ever-increasing share of the nation's energy in the upcoming decades. That's game-changing for the environment, because neither source requires fossil fuels to produce. Furthermore, an economy based on renewable energy should theoretically reduce destabilizing fluctuations in energy prices because the fuel for wind and solar is free, unlike coal, oil and natural gas.

The trend is already picking up steam. The residential solar market grew by 76 percent this year compared to the first quarter of 2014, according to a report by Solar Energy Industry Association (SEIA) and GTM Research. About 645,000 homes and businesses across the nation are hooked up to solar, according to SEIA, and the installation price has fallen by 73 percent since 2006. At the projected rate of growth, the nation's capacity could double in as little as two years.

An Electrician's Dream Come True

The data give “a clear glimpse into the future role that the residential sector will play as a primary driver of not only solar market growth, but the overall electricity generation mix,” Shayle Kann, Senior Vice President at GTM Research, said in a press release. “In the first quarter of this year, the U.S. installed more residential solar than natural gas, and solar on the whole accounted for 51 percent of all new electric generating brought online. We expect more than three million residential solar installations over the next five years.”

Consumer engagement is another reason for optimism. As homeowners take proactive steps toward controlling their own energy through solar, experts expect that people will also take an interest in other efficiency technologies like electric cars, smart homes and energy-efficient appliances.

Sign Up for Solar Today

Homeowners have multiple options available to help them invest in solar energy on their property. Federal tax credits will refund up to one third of installation costs through the end of 2016. Furthermore, companies like Direct Energy Solar are offering leasing options so that consumers can enjoy the savings from solar panels while fronting none of the up-front costs. If you’re interested in taking the plunge, call up an electrician or solar specialist who can assess your house for suitability and walk you through your options.

Electrical issues have a way of cropping up all of a sudden. At that point of time, the only thing on your mind is that you should be able to contact an electrician who will deal with the issue without delay. If you look online, you will find that Sydney has a large number of electrical companies, big and small and you may feel that identifying a good electrician shouldn’t be much of a challenge.

This could be no further from the truth. There’s much more to zeroing-in on the right electrical contractor that than. As a matter of fact, if you aren’t too particular about who you are hiring for the job that can easily lead to a major fire break-out on your property. This is something you want to avoid under all circumstances. The very first things to take into consideration are:

It’s common knowledge that you would need an electrician to install/ replace/repair/maintain electrical systems. In our country, you are legally permitted to replace light bulbs and operate electrical appliances in just the manner they are designed to be operated. Apart from that, all electrical jobs should be handled by a certified and insured electrician and this can include:

The rule of thumb is that even if you feel a particular job is very minor and you know exactly what you’re doing, it’s important that you call an electrician. It’s vital to understand that any type of DIY electrical work can be extremely dangerous – it can result in fire, damage, injury as well as death. Here are the things you should be looking for when you are choosing an electrical contractor:

We at Allround Electrical are licensed and insured electrical contractors; we can rectify all types of electrical faults and provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263