The electrical system of your home is one of its most important components, and also one of the most hazardous. Frayed wires, loose connections, and similar issues can crop up almost anywhere in your home, and dry air that we often get in the winter can make it even worse.

Without appropriate, and safe, repairs, frayed wires or loose connections can short out important appliances or even start a fire. It’s important to remember, too, that only a highly trained and experienced electrician should attempt repairs on this system. But how do you know if you even need repairs? Are there any tell-tale signs? Yes! Keep reading to learn more.

Perhaps this seems normal, particularly if you have something plugged into the outlet at the time. However, if an outlet is warmer than the wall that surrounds it, then there is likely a problem with your wiring. In some cases, an outlet can get a little warm when it’s plugged in, but it should never be hot to the touch.

Lights that are dimmer than they should be, or flicker when you turn them on, are probably receiving intermittent electricity. This means trouble somewhere in the wiring system.

Malfunctioning electrical components can cause a low buzzing noise, which will typically stop when you cut power to that particular circuit.

If your breakers keep tripping on one particular circuit, then chances are that circuit is overloaded. It may also be an issue with one or more appliances hooked up to it.

Sparks from any electrical outlet are serious and should never be ignored. Be sure to shut off power to the affected area right away before calling in a technician. In some cases, the problem might actually be with the appliance hooked up to the outlet and not the outlet itself.

Are you sick and tired of putting food in the fridge and forgetting about it, only to find it rotten and moldy weeks later? Not only is it a waste of food, you're left with a disgusting mess to clean up. One day soon, however, your refrigerator could send you a reminder to eat your leftovers before they spoil. Read on to learn about how smart technology in your kitchen can help prevent your food from going bad.

Communicate with Your Appliances Via Text Message

As the Internet of Things becomes more prominent in our household electrical work, more and more devices are offering futuristic functions. Smart refrigerators already exist, with models that can send you a phone message when the door is left open, when the coils need cleaning and when the unit is in need of service.

A new model that Samsung has prototyped promises to take the smart technology even further. The fridge comes equipped with a touchscreen to offer you full control over its features, and a camera inside the unit that actually monitors your food and alerts you when it's been neglected for a little too long. You can use the touchscreen to check on how the food is doing, or even have the fridge send a text message that you need to eat the leftovers ASAP.

A Wealth of Inter-Connected Devices

The connectivity and versatility of our brave new world means that the next generation of refrigerators can be even more proactive about your meals. Not only can the Samsung fridge tell you when your food is bad, it has the capability to automatically order more items to replace whatever you use up or throw out. That's right, your next refrigerator could even handle food shopping for you.

The functionality of this smart refrigerator is just one example of how our electrical work is being transformed to relieve us of many of the mundane tasks of day-to-day life. In the big picture, getting alerts when your food starts to spoil might not sound like such a big deal – but imagine your fridge, stove, clothes washer, bathroom cabinet and other devices all working together make your household run more smoothly. And in the meantime, you can also dream about a world where you'll never have to subject food to the sniff test ever again!

Expert Hands for All Your Electrical Work

If you need advice on purchasing a new refrigerator, or have other electrical work that needs to be performed, get in touch with a qualified electrician today.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

Looking to hire the best electrician you possibly can in MD, DC or VA? We don’t blame you. As the economy faces serious challenges and uncertainties, families are forced to live on a stricter budget. Companies throughout the DC Metropolitan area must also operate on a much tighter budget than years past. It only makes sense for you to wonder exactly how to hire an electrician. You want to hire a reliable, quality electrician who can answer your questions and solve any electrical problems you may be having. Here at Kolb Electric, we thought it would be helpful to create a guide for selecting the best electrician.

There are so many electricians in the MD, DC and VA market that it can be difficult selecting one!. To make a list of prospective contractors, get recommendations from your family and friends. If you cannot get any, search online to compile a list of local electrical contractors. This is an important first step in finding the best electrician to meet your needs.

After you’ve prepared a short list of prospective electrical contractors, you may still be wondering how to hire an electrician. One thing you can do is to check the licensing credentials of these electrical contractors. The best electricians are trained, skilled and experienced. You can use the Internet to determine whether a prospective electrical contractor is licensed or not, and you can also check whether the license is still valid or not. An electrician without a license or with an invalid license should raise big red flags!

You should also use the Internet to read reviews posted by others who have some experience working with the prospective electricians you have on your list. This is an excellent way to determine the best electrician for you. However, you should approach these results with a grain of salt. Someone with a bad experience is more likely to post something negative online than someone who has had a great experience. Always put more stock in what you’ve heard from family and friends.

When you reach the point where you have a list of just a few quality prospective electrical contractors, the next step is to contact them so you can secure and compare quotes. Keep track of exactly what services the contractors claim they will provide when compiling quotes. Since your list now features only quality contractors, cost is the next factor you should focus on.

Finally, in order to really know you’re hiring the best electrician you can, ask a lot of questions to prospective contractors. The quality of their answers can go a long way in helping you hire the best electrician. Ask contractors what experience they have dealing specifically with the electrical problem you have.

We hope this helps you better understand how to hire an electrician. There are several steps involved, but they are all essential to helping you select the best electrician you possibly can!

At Kolb Electric, we have specialized in providing professional electrical service since 1925. Impeccable customer service and attention to detail has allowed us to become one of the best electricians in Maryland, Washington, DC and Virginia. Our electricians are:

Contact Kolb Electric for all of your electrical needs. Our licensed, professional electricians are ready to service you 24 hours a day, for all of your commercial and residential electrical needs. No job is too small or large!