It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.

Since 1989 approximately 1 billion feet of CSST gas line or yellow gas line has been installed.  Nearby lighting strikes can cause an electrical surge and puncture the CSST line.  Bonding is considered electrical work and should only be performed by a qualified electrician.

In new construction we bond all gas lines.  Currently about 500,000 new homes per year have CSST gas line installed in them.  However, CSST gas line is considered safe when properly installed in your home.  Part of the installed properly guidelines refers to bonding your CSST gas line, your local electrician can do this for you.  If your home is more than two years old we recommended you have a licensed electrician check for proper gas line bonding.  Many real estate transactions and inspections require the CSST line to be bonded prior to the sale.   A good source of information on CSST lines can be found at CSSTSafety.com.

“CSST should NOT be confused with flexible gas appliance connectors – the product that joins a moveable appliance to your home or building’s gas supply line. The difference is flexible connectors attach directly to the moveable appliance from the wall or floor. CSST is usually routed beneath, through and alongside floor joists in your basement, inside interior wall cavities and on top of ceiling joists in attic spaces.” CSST Safety.com

If you would like more information or to check to see if your CSST line is properly bonded please feel free to Contact us anytime!  We bond CSST gas lines in the Des Moines area and surrounding communities.

Here's a novel idea to ponder: One day, your car could be the power source for your home electrical work. That's right, electric cars are being primed to send electricity from their batteries back into the home and even to the electric grid. They aren't full-time power sources, of course, but cars do have the potential to get you through a power outage and even help you save money on your electric bills. Read on to find out how.

Upending the Human-Car Relationship

The typical relationship between electric cars and our home electrical work is a one-way street – you fill up the car's battery from a home charging station, a process that takes hours. However, new fast-charging technology that is becoming available has a second intriguing function: it also allows the car to discharge electricity into the home. Nissan has already developed a system that would allow the car to hook up to home electrical work and keep it running in an emergency.

The battery in the Nissan Leaf holds enough energy to power a typical home for about 24 hours, longer if you take energy conservation measures. It won't keep the power on forever, but it's enough to keep the lights on and the fridge cold for a while during an outage. Even more impressive, since cars are, after all, mobile, the autos could be driven to areas in need of power in the event of a black-out to help with emergency services.

Smoothing Out Demand

The next step would be to use cars to actually sell electricity back to the grid. In a twist on time-of-day pricing, in which electricity costs more during the day and less at night, manufacturers envision a day when our cars are used as giant storage batteries, soaking up electricity at night when it's cheap and then discharging it back to the grid during the day to help even out demand and reduce bills at the same time.

With the right technology in place, utility companies could control exactly how much electricity comes and goes from plugged-in cars. This could reduce expenses dramatically, because it costs a bundle to bring on incremental power sources to meet extra demand during the day.

A Vision of the Future

This futuristic vision of the electrical grid isn't here yet, but the technology already exists. As more and more electric cars hit the road, we get closer to realizing their potential as mobile power storage devices as well as human transportation vehicles.

To find out if your home is suitable for an electric car charging station, call a local electrician today.

Whether the lights outside your home are functional or part of the décor, they are one of the most powerful parts of the electrical system. Because of the high amounts of energy these lights use, they sometimes malfunction and require repairs.

You should always keep in mind the possibility of doing a full redesign for your home’s lighting if it needs frequent repairs or is greater than 10 years old. This will give you a more attractive outside and let you take advantage of recreational areas long after the sun goes down. Improved lighting will also make your home safer and more secure.

Call our specialists in outdoor lighting and electrical repair in North Seattle, WA today to learn more about how we can help you with your lighting issues. From installation to repair work, we have the services available to care for your home’s lighting.

Have you ever gone on a long vacation, or even just gone away for a night and left a minor child or a pet behind? Were you able to enjoy your trip without concerning yourself about what was going on at home? Or were you constantly distracted by thoughts of “what if?”

Chances are that even if you trust that nothing will happen, there’s always that nagging feeling that something could go wrong. The good news is, there’s an easy way to gain back the peace of mind that you deserve: a robust home security system.

Home security cameras have become increasingly popular in recent years. Also, through home automation technology, they can be fully monitored and controlled from your phone, so you can rest easy knowing that your home and family is safe. Home automation is another innovation that’s become more popular recently—not only is it used to control security but also HVAC systems, audio, and lighting.

The installation of a home security automation system in complex and labor intensive—not a task you want to take on yourself or trust to just any average handyman off of the street. It’s wise to ensure that you hire the best professional company you can find for service.

The technology behind these systems is always changing and undergoing new developments. A security system is not much good if you cannot depend on it when you need it. The same goes if you need repairs done on your home security system. Even the simplest of systems (a standard alarm) can experience malfunctions and failures over the years. Fortunately, we have the tools and knowledge to resolve your home security issues.