An electric conduit is electrical tubing used for protection and routing of electrical wiring. They can be made from a variety of materials, such as: plastic, metal, fiber and fired clay, all depending on the purpose it is being used for. It is generally installed by electricians at the electrical equipment’s installation site. The regulations governing the conduits’ use, form and installation details are specified by the US National Electrical Code (NEC).

Conduit is used as a general term to describe any system that contains electrical conductors. The conduit systems are installed for the following reasons:

To operate as pull outlets for the conductors that are being installed Make 90° bends in conduit runs

Types of Conduits

Conduit systems are classified based on the material used to make the tubing, mechanical stiffness and wall thickness. The material is selected for mechanical protection and corrosion resistance after taking into consideration the cost factor. There are special guidelines to be followed for wiring equipment in hazardous areas that need prior approval. Based on these factors, we examine a few prominent conduits:

Form 35/5/85 ex. Appleton LB400M

The Form 35 is used for malleable iron unilets as they have high tensile strength and ductility along with high corrosion and shock resistance. With the easy inbuilt rollers of type C (1-1/4” thru 4”) and type LB (1-1/4” thru 4”), these type of conduits help eliminate the damage when cable is pulled through the hubs. Form 5 has inbuilt rollers on all 11⁄4 to 4 C and LB bodies to facilitate wire pulling.

Form 7 ex. Crouse hind LB37

The Form 7 ex. Crouse hind LB37 is compatible with rigid and intermediate conduits for indoor as well as outdoor installation. It is made of cast iron or cast aluminium for a long life. It is extremely suitable for compact installations with rigidly threaded conduits of various shapes and sizes. The Form 7 has an exclusive snap tight and wedgenut cover attachment to provide clear, unhindered cover opening.

Mogul ex. Appleton BLB400m

The Mogul ex. Appleton BLB400m has a large body size that facilitates pulling of large and heavy conductors and are used as cast covers for providing additional wiring area. These are best used for pulling straight, 45° or 90° angle turns as well as for making taps and splices.

Form 8 ex. Crouse LB38

The Form 8 ex. Crouse LB38 is a 1” rigidly threaded conduit without cover and gasket made of Feraloy iron alloy. It is useful for indoor and outdoor use and comes in sizes ½” through 4”.

Form 9 ex. Crouse LB39

Generators can serve as literal lifesavers in the event of an emergency—providing power, light, and heat whenever a disaster strikes. But to be able to do its job, it has to be ready to go right when the situation demands it. This means making sure it’s well maintained, and repaired quickly when service is needed. Of course, this also means that you need to know when your generator needs repair service. Keep reason for 3 reasons that this may be the case.

When our electrical professionals inspect your generator, they’ll take a close look at your wiring, buttons, and any other electrical components. If any of these show a sign of damage, then the unit likely needs to be repaired.

Indications can include frayed wires, loose connectors, buttons that stay stuck when you press them, or electrical overloads that shut the generator down at improper times. Additionally, the voltage on the generator battery needs to be tested to make sure it’s not in disrepair.

The longer your generator lasts, the more likely it is to develop a leak from a hose, a line, or storage pan. Leaks can include oil or fuel—depending on the type of generator you own—in addition to coolant designed to keep the engine block from overheating. Check around the appliance for puddles and be sure to give us a call if you notice any.

If you’re lucky, you won’t have to use your generator for years (but it’s great to have that peace of mind when you do need it!) Unfortunately, however, when generators sit for a long time without being used, the battery can be drained, and other parts of the engine can start to fall into disrepair. This can be avoided by investing in yearly generator maintenance.