Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

If you are thinking about updating the existing lighting scheme in your home you may not realize there are a lot of different options to choose form. Nowadays, the standard single light fixture in the center of a room is outdated. There are so many new and exciting ways to light up your house. You will be amazed at what an electrician in Burbank can do with your current boring lighting scheme. The staff at The Electric Connection is here to help you transform your home into one that is bright and inviting.

Track Lighting

This is a great option for a kitchen or living room. Several lights are mounted along a track that runs straight or in a U-shape. The lights can be directed at different angles allowing you the freedom to light up a whole space with just one switch. You will have the freedom to choose the wattage of each bulb. This is like having 4 lights without the extra fixtures.

Recessed Lighting

These lights are great for areas where you don’t want anything hanging and getting in the way. It also has a very clean look that many people find desirable. The lights are mounted into the ceiling making them flush with ceiling. You can choose to have several lights installed that will light up an entire room without ever getting in the way of hanging pots and pans or hanging plants.

Undercounter LEDs

These are excellent options for bringing light into the dark areas of your home. Under the counter LEDs can be installed by an electrician. Burbank homeowners will be able to use their countertops freely without worrying about blocking the overhead light and risking an injury. If you would like to learn more about the different lighting options or would like to schedule your appointment to have your lighting updated, give The Electric Connection a call today.

You should never “lend” your contractors license to anyone, for any reason, ever. There are many good reasons for a contractor to have this “never lend” policy.

However, sometimes it can be advantageous for a contractor to pull a permit for someone else’s work. Like a homeowner installed his own main electrical panel and then he finds out that his city does not allow homeowners to obtain a “Homeowner’s Permit” for that job.

Without going into a lot of explanation, here is a form I made up a few years ago that has minimized my risk and maximized my profit in these situations. WARNING! Is this legal in your state? I’m not the guy who knows or is going to find out; that’s up to you. But, anyway, here’s the form:

I _____________________ am requesting that The Electric Connection

Print Name

obtain an electrical permit for electrical work located at

__________________________________________________________

Address City State Zip

I am aware that The Electric Connection did not perform this electrical work and is not responsible for any corrections or repairs required as a result of either the electrical work or the inspection of this work.

I am aware and agree that The Electric Connection is obtaining a permit for work that was done by others and that The Electric Connection is not responsible for the quality and/or safety of this work now or at any future time, and that The Electric Connection is not responsible for any present or future liabilities arising out any of the work covered under this permit.

For the sum of __________ plus the exact cost of the electrical permit, The Electric Connection will obtain an electrical permit for this electrical work. If the electrical work does not pass inspection, I may or may not choose to hire The Electric Connection to make any corrections necessary to bring the electrical work up to city/national electrical code standards as required by the electrical inspector.

If I choose to hire The Electric Connection to do this electrical work, I am aware that there will an additional charge for this work, and that this additional cost will be mutually agreed by myself and The Electric Connection before any work is started.

________________             ___________________ Signature                                    Date

———————————————————————————————-

Visit our company profile.