Many people in the Alpharetta area have barns without pole barn lighting. It is still fairly common to see pole barns with no artificial lighting or traditional sodium lights installed. Both options can lead to unsafe situations.

Pole barns have many dark nooks and crannies and often have sharp objects stored in them. Sharp objects plus dark areas is a recipe for injury. To prevent potentially dangerous conditions, you should have a lighting system installed. It is especially important to get these lights installed before winter, as the days are shorter and nights are longer. The pole barn will be left through those long nights without natural or artificial lighting unless you have an electrician install illumination now.

Here are the options:

● Fluorescent Lights. Fluorescent lights are a good option for a relatively small space, especially if the ceilings are low. Fluorescent lights are cheap to buy and run. They are also fairly energy efficient, which means your electrical bill will be lower.

● Halide Lights. While fluorescent lights have long been popular for many residential and commercial applications, halide lights are relatively new. They have been around a few years but are not as common as fluorescent lights due to their more specialized nature. Though halide lights are stronger than fluorescent lights, they do have a few drawbacks. They are more expensive to buy and operate, and they take a while to reach full power after being turned on. Nonetheless, they’re likely the best option for large pole barns because of their power.

Electrical installation testing is a practice that has become more important over time. This is due to the increasing complexity of installations in both commercial and residential spaces. When it comes to electrical work, the top priority is always going to be safety. This focus is the reason electrical standards and wiring regulations exist in the first place. Electrical installation testing serves the purpose of identifying any possible deficiencies. These shortcomings could be areas in which an electrical system doesn’t meet regulations.

It’s important to have older electrical systems looked over to ensure they’re still in good working condition. At the same time, new installations need an inspection to make sure they conform to today’s stringent standards. You might also feel inclined to have testing done if you’ve recently purchased a building with preexisting installations. If you’re curious about what makes electrical installation testing so complex, or if you’re wondering why only a professional should be doing it, read on for more information.

There are different phases of an electrical installation to keep in mind. The first step is to perform a visual inspection, which is exactly what it sounds like — an expert will confirm the permanently wired electrical components are compliant with safety regulations. He or she will make sure there are no outward signs of damage, and that the required safety measures are present.

After the visual inspection, electrical testing begins. This is where having a qualified individual working becomes even more critical. Everything from specialized training to safety-oriented clothing is necessary for this aspect. In fact, non-authorized people might have to keep a certain distance away from the testing itself.

The testing will cover a building’s wiring, as well as its various components. This can include electrical panels, outlets, distribution boards and lighting. Essentially, the examination covers all systems that conduct electricity within a building. The electrician will use the tests to make sure every necessary precaution is in place to reduce the risks of injury or death due to electrical shock.

In some cases, the testing will call for exploratory work to complete the job as effectively and safely as possible. Parts of the system might need to be temporarily shut off for this. This means you should make sure you don’t have something important — and electricity-based — going on while the installation testing is taking place.

As you have likely noticed, Winter is well on its way in the Greater Vancouver area and Lower Mainland. With heavy snowfall and stormy weather predicted for this upcoming Winter season, it’s important for residents in these areas to brush up on all electrical safety procedures and best practices. The licensed electricians at Expert Electric have been providing Vancouver and the Lower Mainland with residential and commercial electrical services for many years. Check out our list of Winter electrical safety tips to keep you protected this Winter season.

Don’t get caught unprepared in a local power outage. Every year, residents of the Greater Vancouver area and Lower Mainland lose power due to local power outages. In recent years, some residents have been stuck without power for up to 72 hours. As a rule of thumb, ensure that you are fully prepared with an emergency kit that contains enough supplies to last up to 72 hours without power. Some of the supplies that your power outage emergency kit should include are batteries, candles, matches, flashlights, bottled water, non-perishable foods and more. For a full list of emergency kit supplies, please visit the BC Hydro website.

Winter storms can cause significant damage to trees outside your property. It is important to inspect any trees on or near your property that could result in damage to your home or building. Any loose branches should be removed to minimize the risk of falling. Large trees can also damage power lines and vehicles. If possible, park your vehicle in a safe area that is located away from any large trees that could fall on it. If you are unsure of whether a tree poses a significant threat to your property, call the licensed electricians at Expert Electric.

Snowfall and Winter storms mean an influx in the amount of water present on your property. Because water and electricity don’t mix, it is crucial to ensure that there are no loose wires or electrical cords present around your property. All electrical equipment should be stored safely away while not in use. Any large electrical equipment such as pools, hot tubs or outdoor lighting should be inspected to ensure that it is operating properly and the equipment’s cords and electrical wiring are hazard free.

If you would like further information about Winter electrical safety tips, please contact one of our licensed electricians at 604-681-8338. We are happy to answer any questions you may have. Our team of licensed electricians has been servicing the Greater Vancouver area and Lower Mainland for many years. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and more. Visit our website to book an appointment today.

If you’ve spent any amount of time on our services pages, you’ve probably noticed us consistently mention dedicated circuitry. You need it for your outlets, for heavy appliances; gosh, you even need one for your microwave. But what is a circuit, and how many do you really need? Important questions, and luckily for you, our certified electricians have answers.

When it comes to electrical work, Kolb Electric has everything you need to maintain optimal home performance. Our Rockville electricians carry years of top-notch training, and possess all of the know-how and technical knowledge needed to get your circuit wiring done right. Contact Kolb any time you need electrical services!

Put super basically, a circuit is an engineered circular path that electricity takes to do work. Think about the light switches in your home. When you flick them on, electricity flows into the closed circuit that sends power to your fixtures and bulbs, and voila! You’ve got light. All electronics and electrical applications work off of the concept of circuits.

A circuit always starts and stops in the same place, creating a revolving door of sorts for harnessed electricity.

So, What Is a Dedicated Circuit?

Technically speaking, a dedicated circuit is no different from a regular circuit in application. It is simply set aside to power one, specific appliance , tool, or piece of equipment. Dedicated circuits are required by NEC (National Electric Code) for all major appliances (generally those that involve massive, fluctuating voltages). So what about portable tools that eat power? Your electric drills, and hair dryers? This is why outlets are on dedicated circuits, too!

The answer here is a little malleable. It depends on a number of variables including:

Notice that all of these variables can change, or be changed. That means the number of circuits you need equates to basically this: As many as it takes. If it has a switch, uses a motor, or gets plugged in, odds are it needs a circuit (maybe not a dedicated one, but a circuit). But how do you find out exactly how many you need? Well, that’s what electricians are for! One thing you can find out on your own, is if you have too few circuits.

If you experience any of these complications, you probably need more circuits, or an upgrade:

There are more complications than this, but they can get complicated, and often have other causes as well.

Think you might need some electrical work in Rockville? Call on the certified electricians at Kolb Electric! We can have your needs assessed and provided for in no time, and our services are guar

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.