Your lights and appliances are working fine, so that means your wiring is too, right? Not so much. Seldom inspected after installation, the wiring in your home may need an update, especially if your home is more than 40 years old.

Installing sufficient wiring goes beyond safety. It also means enhancing your home’s functionality, reliability, and safety to keep up with today’s ever-increasing power needs. This applies not only to the installation of current electrical wiring, but wiring for your phone, Internet, cable, and more.

According to the NFPA (National Fire Prevention Association), faulty wiring is the leading cause for residential fires. The National Electric Code (NEC) updates electrical codes and standards for outlets and wiring every three years. Their mission is to keep up with technology designed to keep your home and family safe. Has the wiring in your home gotten any attention since the 2014 NEC code updates? Chances are it’s been far longer than that.   

Aluminum wiring used in the 60s and 70s, non-metallic wiring installed in the 40s and 50s, and knob and tube wiring in pre-1930s homes are well-known safety hazards, as are loose connections and frayed wires resulting from wear-and-tear.  

These are an enormous safety hazard – for you and your electronics. Without proper grounding, electrical excesses have nowhere to go but into your devices – or you – even if you have a surge protector. Reduce shock risks by rapidly addressing this sign of wiring that is way behind the times.

Identified by the “TEST” and “RESET” buttons on receptacles, GFCIs protect you from shock in high moisture areas. They are currently required in bathrooms, kitchens, laundry rooms, utility rooms, garages, spa/pool areas, unfinished crawlspaces/basements, and any areas outside of your home. If you are lacking these inexpensive, easy-to-install devices in any of these areas, you may be in for a shocking experience.

AFCIs prevent fire by acting as a circuit breaker, which disconnects in the event of a potentially dangerous arc. They are required in bedrooms in all 50 states, though some states require them in all circuits throughout the home.

Childproof outlets require equal pressure in all prongs simultaneously for electricity to flow. They cost pennies more than traditional outlets and are required in all newly built homes.

How many amps power your home? While 60 amps may have been sufficient in the past, today’s homes often need 100 to 200 amps to successfully operate the glut of large and technologically advanced appliances you use simultaneously, from mobile devices and flat screens to your refrigerator and air conditioner. Without an adequate power supply, you could end up damaging these sensitive items beyond repair.

Protect your family and home, ensuring the smooth, efficient operation of all things electrical while boosting the value of your property. Contact Mr. Electric® for an electrical safety and wiring inspection today.

Flush or Semi Flush?

Flush mount and semi-flush mount lighting fixtures are integral components in lighting design, adding interest and depth while providing ambient illumination and decorative lighting effects to hallways, bedrooms and bathrooms.

The difference between a flush and semi-flush light fixture is that a flush fixture fits snugly to the ceiling, while a semi-flush fixture is suspended, leaving a small gap between the ceiling and fixture.  Opting for a flush or semi-flush light fixture is based upon taste and proportional considerations, but a few standard rules apply:

♦ Semi-flush—Somewhere in between the chandelier and standard ceiling fixture, the semi-flush fixture shines with distinction.  Taking up just the right amount of space with the power to attract desired attention, the latest semi-flush light fixtures provide superb illumination with artistic excellence.

♦  Semi-flush fixtures provide an added benefit: the small gap allows for double the illumination with indirect uplight rebounding off the ceiling and downlight emitted directly from the fixture.

♦  Flush fixtures—Most often employed in homes with standard 7-foot ceilings to provide general illumination for bedrooms, bathrooms, foyers and hallways.

Novel compositions and unique finishes are available at a variety of price points and are being featured from top lighting vendors around the world, making it easier than ever to find ceiling light fixtures in keeping with your budget and style requirements.

Corbett Lighting offers outstanding flush and semi-flush lighting designs:

-CQ33 “Cirque” Semi- Flush Fixture

-120-33 “Karma” Flushmount Fixture

It is almost time to head to the garage or attic or wherever you have stored your lights and other decorations all year. It is exciting to pull out the holiday decorations that signal a time of giving and family. The family loves the work you put into decking the halls and making your home bright and beautiful. However, it is important you are practicing safe decorating tips provided by your electrician in Santa Monica. The team at The Electric Connection wants you to enjoy this holiday season without putting yourself or your home at risk.

Limit the Strands

Don’t get carried away connecting light strands together. You should not connect more than three strands together to plug into a single socket. If you don’t have enough outlets to run all of your decorations, call an electrician. Santa Monica homeowners will love the freedom and flexibility additional outlets give them, especially outside.

Proper Usage

While most lights and decorations are designed to be used inside and out, there are some that specifically note indoors only. Don’t risk putting these outside as they could short out and cause a fire. You can read the box or the tag near the plug to determine whether it is indoor only.

Appropriate Extension Cords

You will likely need to use a couple of extension cords, but you need to make sure they are appropriate for use outdoors. You also want to make sure you are not connecting several cords together. A Santa Monica electrician explains this could be hazardous if water or snow managed to get between the two connections. Buy cords that are long enough to suit your needs so you don’t have to connect them together.

Decorating should be a fun job—not dangerous. If you need outlets or have any additional questions about electric safety when decorating, give The Electric Connection a call today.