If you recently had a pole building or shop put up on your property, you are probably debating to have it powered with electricity or stick with a generator. There are clearly some real benefits to a shop having electricity. If you are simply using the building to store items, than electricity is probably not a major concern. However, if you are planning to use your shop to work on various hobbies or use it to repair vehicles, electricity is extremely helpful. You will need a Burbank electrician to go about completing the wiring process. You can depend on the team at The Electric Connection to help you make your shop complete with electricity.

Depending on the amount of electricity you need in your shop, you may need to have a sub-panel installed. This is something your electrician will discuss with you and advise you on. If your home is already using the majority of the breakers available in your existing panel, you will need an upgrade or an additional panel installed to run the shop. The size and type of the tools you will use in the shop will influence your decision.

Once you have decided on the electric panel situation, the next stop is to discuss outlet placement with your electrician. Burbank shop owners can decide how many outlets they need in the shop. You may even need a 240-volt outlet to run certain heavy machinery or to plug in a Level II electric car charging station. These are all options for you to consider when you make the decision to hire an electrician. Lighting is yet another element you will want to think about. Typically, a single fixture is installed along the ceiling and then several lamps will be used to illuminate specific work areas. If you would like to discuss running electricity to your new shop, give The Electric Connection a call today.

Commercial buildings require special considerations when it comes to electrical wiring. Most commercial buildings do not have the luxury of a wooden frame to run wires through, so other wiring methods must be used. Some of those are discussed below.

In some instances, armored cable may be used. This type of cable, known as teck cable, is available in nearly any size and features a core made of the desired number and sizes of wires, protective jacketing, flexible aluminum armor, and in some cases a weather-resistant exterior jacket. Teck cables can be pulled through conduit, cable tray, or be buried directly in the ground as long as the cable is rated for direct burial and certain burial depths are adhered to. Teck cables can also be installed in hazardous locations by using special explosion-proof cable fittings and approved sealing compounds. The main advantage to teck cable is its ease of installation and versatility. When using a cable tray system, cables can also be easily added or removed at any time.

With this basic knowledge of the types of electrical wiring methods used in commercial buildings, it is easy to select the best option for any installation.

Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

We can install and maintain smoke detectors on your residential or commercial premises. For more information, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

An email from a customer on Wednesday made our week: “I’m really late in sending you a picture of my kitchen that Pegasus helped create. Every time I turn on the under cabinet lights,  I still get that great feeling from the first time. ” And what a beautiful kitchen it is:

Fluorescent T5 Thin-Inch Light Fixtures in her kitchen remodel. We were just as thrilled with the email she sent us in the midst of the remodel:

Just wanted to let you know how pleased I am with my experiences with your website, customer service and products. I hate to be long-winded, but it”s important for me to tell you about my search for under cabinet lighting. Because I’m spending lots of money on a remodel which included gutting the kitchen, I wanted to be sure to choose the best product for the lighting under the new cabinets.

After searching at the big box stores and getting no more info than what was written on the lighting display, I tried two local lighting specialty stores. Believe it or not, I was told at one of them by the manager that xenon doesn’t have a color temperature. (I decided he had to have been born and raised on a planet with different laws of physics.) No one could really help me at all and seemed totally disinterested in trying to sell me anything. Discouraged, I came home and Googled “under cabinet lighting.”

Your website is a window on the world of lighting! Oh, my goodness, the articles about lighting, the recommendations, the product descriptions!! I was totally elated, then began to think maybe it was just too good to be true, so I revisited your website a few more times over the next few days. Then…….just to be 100% sure…….I called your toll-free number and talked with a customer service representative. I told her that I wanted WHITE light for the under cabinet lighting: standard fluorescent is too blue, daylight and LED is too green and xenon seems too yellow, so I wanted to be sure to get a color temperature that would be white. I also wanted lighting that would produce as little heat as possible. She recommended the Thin-Inch with a color temp of 4100K. We talked about my previous experiences for a couple of minutes and I thanked her for being so helpful and we ended the call.

After all that, can you believe I was still a little nervous about ordering? A couple of days later, I decided to suck it up and take the plunge. So I measured all the spaces under the cabinets, made my list using your recommendations about installing under each cabinet and filling the under cabinet width and ordered online. The shipment arrived a day early which was a very pleasant surprise. The kitchen is now mostly finished.

But the best part of it all is what the under cabinet lighting does for the backsplash! It is AMAZING!! That awesome WHITE light is perfect…….no other word describes it. And after arguing with the electrician about the placement of the fixture at the front of the under cabinet space, not the back, he agreed that the front works best as your website recommends. My experience with Pegasus has been one of the best and easiest of this remodel. Thank you so much! I’m looking forward to having it all done and sending you photos.

Thank you, thank you, thank you, Lea, for reminding us why we do what we do!

We are so happy you love your new kitchen.