If you are doing work on your yard over the weekend, you can now get away with doing everything using only electricity. Lawnmowers, pressure washers, and other tools that commonly used gas can now be purchased in models powered by electricity. If you are using these electrical powered tools you need to ensure that you have electrical coverage around your home to plug them in. Here are some tips for having outdoor GFCI outlets installed in your home’s exterior.

Most homes come standard with a couple of outdoors outlets. Sometimes this is not enough and you will be restricted because the cable for your lawnmower or pressure washer can’t reach around the side of the home or to the back of your yard. When preparing to have an outdoor GFCI outlet installed, measure the length of your cables and the maximum distance you will need to go. You can then create the radius of coverage you will need and pin point the correct locations for the outlets. If you do not choose the optimal location you could end up installing more outlets then you need and will have to unplug during tasks to move outlets. This is inconvenient, so lets do it efficiently!

With a ground fault circuit interrupter (GFCI), the outlet can detect if there a problem in the circuit such as contact with water or a person, and then the circuit will shut off. This is especially important outside, as the outlet is more susceptible to water, from rain and snow, car washing, and interaction from animals and children. It is also wise to have covers installed overtop of the outlet as well. This adds an extra layer of protection. The covers will need to be manually opened by yourself before use and prevent unwanted interaction.

As we usually recommend, double check that your existing wires and circuits can handle the additional outlets. The tools and equipment that make use of these outlets can demand a lot of power and if the outlet is installed on circuit that is already heavily loaded, you will be experiencing trips and electrical hazards to your home. An Expert Electrician will be able to identify the proper circuits to have the outlets installed on.

Using electricity offers convenience and efficiency. Make the most of it and be safe by having a professional, certified electrician install outdoor GFCI outlets on your home.

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!

One of the best ways to deter vandals, miscreants, burglars etc from entering your residential premises, is to set up an efficient camera system. Of course many people also use their CCTV cameras for indoor surveillance in their home; to monitor their baby or even to keep an eye on domestic help. Regardless of the brand, if you are setting up a new security system, there is some basic planning you should be doing.

Some wireless CCTV cameras are basic plug and play ones, and you won’t have trouble setting them up yourself. However, if you have chosen the more complex and advanced systems, you would need a professional to handle the installation and set-up for you.

The company you choose for the job should be able to handle all the cabling and hardware installation. For advice or CCTV system installation services, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Electricity is a staple in most homes today, and our reliance on it means that it’s important to learn how to handle it safely. Unfortunately, electrical fires and shocks aren’t as rare as you might think, but the good news is that most of them are completely preventable. By keeping a few basic ideas in mind, you can safeguard your home from electrical hazards and still enjoy helpful appliances and beautiful light fixtures!

Does one of these issues sound familiar to you? For residential and commercial electrical services in the Austin area, call Bryant Electric Service today!